Guest editorial : In Journal of networks, v.7 n.3

Networking of computing devices has been going through rapid evolution and thus continuing to be an ever expanding area of importance in recent years. New technologies, protocols, services and usage patterns have contributed to the major research interests in this area of computer science. The current special issue is an effort to bring forward some of these interesting developments that are being pursued by researchers at present in different parts of the globe. Our objective is to provide the readership with some insight into the latest innovations in computer networking through this. This Special Issue presents selected papers from the thirteenth conference of the series (ICCIT 2010) held during December 23-25, 2010 at the Ahsanullah University of Science and Technology. The first ICCIT was held in Dhaka, Bangladesh, in 1998. Since then the conference has grown to be one of the largest computer and IT related research conferences in the South Asian region, with participation of academics and researchers from many countries around the world. Starting in 2008 the proceedings of ICCIT are included in IEEExplore. In 2010, a total of 410 full papers were submitted to the conference of which 136 were accepted after reviews conducted by an international program committee comprising 81 members from 16 countries. This was tantamount to an acceptance rate of 33%. From these 136 papers, 14 highly ranked manuscripts were invited for this Special Issue. The authors were advised to enhance their papers significantly and submit them to undergo review for suitability of inclusion into this publication. Of those, eight papers survived the review process and have been selected for inclusion in this Special Issue. The authors of these papers represent academic and/or research institutions from Australia, Bangladesh, Japan, Korea and USA. These papers address issues concerning different domains of networks namely, optical fiber communication, wireless and interconnection networks, issues related to networking hardware and software and network mobility. The paper titled “Virtualization in Wireless Sensor Network: Challenges and Opportunities” argues in favor of bringing in different heterogeneous sensors under a common virtual framework so that the issues like flexibility, diversity, management and security can be handled practically. The authors Md. Motaharul Islam and Eui-Num Huh propose an architecture for sensor virtualization. They also present the current status and the challenges and opportunities for further research on the topic. The manuscript “Effect of Polarization Mode Dispersion on the BER Performance of Optical CDMA” deals with impact of polarization mode dispersion on the bit error rate performance of direct sequence optical code division multiple access. The authors, Md. Jahedul Islam and Md. Rafiqul Islam present an analytical approach toward determining the impact of different performance parameters. The authors show that the bit error rate performance improves significantly by the third order polarization mode dispersion than its first or second order counterparts. The authors Md. Shohrab Hossain, Mohammed Atiquzzaman and William Ivancic of the paper “Cost and Efficiency Analysis of NEMO Protocol Entities” present an analytical model for estimating the cost incurred by major mobility entities of a NEMO. The authors define a new metric for cost calculation in the process. Both the newly developed metric and the analytical model are likely to be useful to network engineers in estimating the resource requirement at the key entities while designing such a network. The article titled “A Highly Flexible LDPC Decoder using Hierarchical Quasi-Cyclic Matrix with Layered Permutation” deals with Low Density Parity Check decoders. The authors, Vikram Arkalgud Chandrasetty and Syed Mahfuzul Aziz propose a novel multi-level structured hierarchical matrix approach for generating codes of different lengths flexibly depending upon the requirement of the application. The manuscript “Analysis of Performance Limitations in Fiber Bragg Grating Based Optical Add-Drop Multiplexer due to Crosstalk” has been contributed by M. Mahiuddin and M. S. Islam. The paper proposes a new method of handling crosstalk with a fiber Bragg grating based optical add drop multiplexer (OADM). The authors show with an analytical model that different parameters improve using their proposed OADM. The paper “High Performance Hierarchical Torus Network Under Adverse Traffic Patterns” addresses issues related to hierarchical torus network (HTN) under adverse traffic patterns. The authors, M.M. Hafizur Rahman, Yukinori Sato, and Yasushi Inoguchi observe that dynamic communication performance of an HTN under adverse traffic conditions has not yet been addressed. The authors evaluate the performance of HTN for comparison with some other relevant networks. It is interesting to see that HTN outperforms these counterparts in terms of throughput and data transfer under adverse traffic. The manuscript titled “Dynamic Communication Performance Enhancement in Hierarchical Torus Network by Selection Algorithm” has been contributed by M.M. Hafizur Rahman, Yukinori Sato, and Yasushi Inoguchi. The authors introduce three simple adapting routing algorithms for efficient use of physical links and virtual channels in hierarchical torus network. The authors show that their approaches yield better performance for such networks. The final title “An Optimization Technique for Improved VoIP Performance over Wireless LAN” has been contributed by five authors, namely, Tamal Chakraborty, Atri Mukhopadhyay, Suman Bhunia, Iti Saha Misra and Salil K. Sanyal. The authors propose an optimization technique for configuring the parameters of the access points. In addition, they come up with an optimization mechanism in order to tune the threshold of active queue management system appropriately. Put together, the mechanisms improve the VoIP performance significantly under congestion. Finally, the Guest Editors would like to express their sincere gratitude to the 15 reviewers besides the guest editors themselves (Khalid M. Awan, Mukaddim Pathan, Ben Townsend, Morshed Chowdhury, Iftekhar Ahmad, Gour Karmakar, Shivali Goel, Hairulnizam Mahdin, Abdullah A Yusuf, Kashif Sattar, A.K.M. Azad, F. Rahman, Bahman Javadi, Abdelrahman Desoky, Lenin Mehedy) from several countries (Australia, Bangladesh, Japan, Pakistan, UK and USA) who have given immensely to this process. They have responded to the Guest Editors in the shortest possible time and dedicated their valuable time to ensure that the Special Issue contains high-quality papers with significant novelty and contributions.

Deactivation and regeneration of oxygen reduction reactivity on double perovskite Ba2Bi0.1Sc0.2Co1.7O6−x cathode for intermediate-temperature solid oxide fuel cells

in situ high-temperature X-ray diffraction and thermal gravimetric- differential thermal analysis on room-temperature powder, as well as X-ray diffraction, Raman spectroscopy, and transmission electron microscopy on quenched powder, were applied to study crystal structure and phase transformations in Ba₂Bi_0.1Sc_0.2Co _1.7O_6-x (BBSC). Heating BBSC in air to over 800 °C produces a pure cubic phase with space group Fm3m (no. 225), and cooling down below 800 °C leads to a mixture of three noncubic phases including an unknown phase between 200 and 650 °C, a 2H hexagonal BaCoO3 with space group P63/mmc (no. 194) between 600 and 800 °C, and an intermediate phase at 800 °C. These three phases exist concurrently with the major cubic phase. The weight gain and loss between 300 and 900 °C suggest the occurrence of cobalt reduction, oxidation, and disproportion reactions with dominant reduction reaction at above 600 °C. The thermal expansion of BBSC was also examined by dilatometry. BBSC has a highly temperature-dependent thermal expansion coefficient which relates well with its structure evolution. Furthermore, the oxygen reduction reaction (ORR) of BBSC was probed by symmetrical cell and three-electrode configurations. The presence of hexagonal phase at 700 °C rarely affects the ORR performance of BBSC as evidenced by a slight increase of its area-specific resistance (ASR) value following 48 h of testing in this three-electrode configuration. This observation is in contrast to the commonly held point of view that noncubic phase deteriorates performance of perovskite compounds (especially in oxygen transport applications). Moreover, cathodic polarization treatment, for example, current discharge from BBSC (tested in three-electrode configuration), can be utilized to recover the original ORR performance. The cubic structure seems to be retained on the cathodic polarization - the normal cathode operating mode in fuel cells. Stable 72-h performance of BBSC in cathodic polarization mode further confirms that despite the presence of phase impurities, BBSC still demonstrates good performance between 500 and 700 °C, the desired intermediate operating temperature in solid oxide fuel cells.

Efficient design of polarization insensitive polymer optical waveguide devices considering stress-induced effects

We present an approach for the efficient design of polarization insensitive polymeric optical waveguide devices considering stress-induced effects. In this approach, the stresses induced in the waveguide during the fabrication process are estimated first using a more realistic model in the finite element analysis. Then we determine the perturbations in the material refractive indices caused by the stress-optic effect. It is observed that the stresses cause non-uniform optical anisotropy in the waveguide materials, which is then incorporated in the modal analysis considering a multilayer structure of waveguide. The approach is exploited in the design of a Bragg grating on strip waveguide. Excellent agreement between calculated and published experimental results confirms the feasibility of our approach in the accurate design of polarization insensitive polymer waveguide devices.

Reducing the effect of wave dispersion in a timber pole based on transversely isotropic material modelling

Round timbers are used for telecommunication and power distribution networks, jetties, piles, short span bridges etc. To assess the condition of these cylindrical shape timber structures, bulk and elementary wave theory are usually used. Even though guided wave can represents the actual wave behaviour, a great deal complexity exists to model stress wave propagation within an orthotropic media, such as timber. In this paper, timber is modelled as transversely isotropic material without compromising the accuracy to a great extent. Dispersion curves and mode shapes are used to propose an experimental set up in terms of the input frequency and bandwidth of the signal, the orientation of the sensor and the distance between the sensors in order to reduce the effect of the dispersion in the output signal. Some example based on the simulated signal is also discussed to evaluate the proposed experimental set up.