Effects of the extensive culture system as finishing production strategy on biometric and chemical parameters in rainbow trout

The effect of finishing extensive farming period, to reduce fat content and manipulate the fatty acid profile of fish muscle, was evaluated in rainbow trout. Fish were stocked in an artificial lake, in which fish were fed only on naturally available nutrients with no supply of artificial feed, for different lengths of time from 0 to 120 days. No weight loss was noted during the whole finishing period while total length increased from 228±7 to 269±3 mm and the condition factor decreased from 1.41±0.04 to 0.89±0.02. The total fat content of the fillets decreased considerably from 4.7±0.6% at the beginning to 2.4±0.4% and 0.7±0.2% after 45 and 120 days respectively. Fillet fatty acid composition was affected by the time of stocking in the extensive farm. In contrast to the reduction in C18:1n-9, C18:2n-6, total monounsaturated fatty acid and total n-6 percent values, an increase in the C20:5n-3, C22:6n-3, total polyunsaturated fatty acid and total n-3 percent values was observed. It was shown that while other finishing strategies for salmonids have some disadvantages, the extensive culture system seems to be a potentially useful tool for increasing the general quality of the end product.

Physical and electrochemical properties of thioether-functionalized ionic liquids

The preparation and characterization of a series of ionic liquids based on S-alkyl thiolonium, S-alkyl thiotetrazolium, or S-alkyl thiobenzolium cations coupled with bis(trifluoromethanesulfonyl)amide, trifluoromethanesulfonate, alkyl phosphate, chloride, and hexafluorophosphate anions are reported. All are liquid at room temperature, except the chloride salt, which has a melting point of 92 °C. The electrochemical characteristics of this class of ionic liquid have been determined by cyclic voltammetry. Potential windows of the ionic liquids have been obtained at glassy carbon, platinum, and gold electrodes and found to be the largest at glassy carbon, but are limited by oxidation of the thioether-functionalized cation. The voltammetry of IUPAC reference potential scale systems, ferrocene/ferrocenium, cobaltocenium/cobaltocene, and decamethylferrocene/decamethylferrocenium have been evaluated, with the last being most widely applicable. Nonadditivity of Faradaic current is found in the voltammograms of decamethylferrocene in the presence of ferrocene and cobaltocenium. Diffusion coefficient, viscosity, ionic conductivity, double layer capacitance, and other physical properties have also been measured. The dependence of the diffusion coefficient vs viscosity follows the Stokes−Einstein relationship. The properties of the ionic liquids are compared with the related imidazolium family of ionic liquids.

Utilizing polypropylene fibers to improve physical and mechanical properties of concrete

The influence of polypropylene fibers has been studied in different proportioning and fiber aspect ratios to improve physical and mechanical properties of fiber-reinforced concretes. Fibers are used in two different lengths (12 mm and 19 mm) and proportions (0.1% and 0.3%) in concrete mixture design. Hardened concrete properties, such as 7- and 28-day compressive strength, splitting tensile strength, flexural strength, water and air absorption, and restrained shrinkage cracking were evaluated.

No statistically significant effects were observed for polypropylene fibers on the compressive strength of concrete, while toughness indexes, splitting tensile and flexural strength and durability parameters showed an increase in the presence of polypropylene fibers. Increased fiber availability (fiber aspect ratio) in the concrete matrix, in addition to the ability of longer polypropylene fibers to bridge on the micro cracks, are suggested as the reasons for the enhancement in mechanical properties. Finally, crack width in fiber-reinforced concrete is calculated analytically with fiber property variables (fiber type, length, diameter and proportion). Results are compared with experimental values and concluded that with an increase in fiber length and/or decrease in fiber diameter crack width, decrease significantly.

Self-cleaning, superhydrophobic cotton fabrics with excellent washing durability, solvent resistance and chemical stability prepared from an SU-8 derived surface coating

Superhydrophobic cotton fabrics with a very low contact angle hysteresis were prepared using a single-pot coating solution comprising SU-8 (a negative photoresist), a fluorinated alkyl silane and silica nanoparticles. The fabric was treated using a dip-coating technique and subsequently cured under UV light. The coated fabric showed excellent superhydrophobicity with a water contact angle as high as 163° and a sliding angle as low as 2°. The coating was durable enough to withstand 100 laundry cycles. It also had excellent stability against long immersion times in organic solvents, and acid and base solutions.

Interaction between the coating characteristics of galvanneal steel and forming parameters during flat die drawing

Galvanneal steel is considered to be better for automotive applications than its counterpart, galvanized steel, mainly because of its superior coating and surface properties. Galvanneal steel is produced by hot dipping sheet steel in a bath of molten zinc with small, controlled, levels of aluminium, followed by annealing which creates a Fe-Zn intermetallic layer. This intermetallic layer of the coating improves spot weldability and improves subsequent paint appearance. However, if the microstructure of the coating is not properly controlled and forming parameters are not properly selected, wear of the coating could occur during stamping. Frictional sliding of the sheet between the tool surfaces results in considerable amount of coating loss. An Interstitial Free steel with a Galvanneal coating of nominally 60g/m2 was used for the laboratory experiments. Flat Face Friction (FFF) tests were performed with different forming conditions and lubricants to simulate the frictional sliding in stamping. Glow-Discharge Optical Emission Spectrometry (DG-OES) was used to measure the change in the coating thickness during sliding. Optical microscopy was considered for imaging the surfaces as well as an optical method to compare the changes in the coating thickness during the forming. The change to the Galvanneal coating thickness was found to be a function of forming parameters.

Potential microbial and chemical hazards to waterbirds at the Western Treatment Plant

The Western Treatment Plant, a major sewage treatment plant west of Melbourne, Australia, is widely regarded as a significant conservation site for waterbirds. But experiences from various parts of the world suggest that sewage can also be hazardous to waterbirds, and has probably been responsible for mass-kill events. The intent of this contribution is to raise awareness about the potential for adverse impacts of sewage treatment plants on waterbirds, and to stimulate debate on the issue, with the ultimate objective of developing appropriate management strategies to mitigate the risk of mass kills.

Pursuit of the muscular ideal: Physical and psychological consequences and putative risk factors

Developing a lean muscular figure for the purposes of sports and/or appearance has become a central issue for males. Concern has been raised because the desire to develop such a body build may lead to the adoption of numerous health-threatening behaviors. Consequently, this review presents a comprehensive analysis of the physical and psychological consequences that result from the use of steroids (legal and illegal), ephedrine, and deleterious dieting strategies specific to males. Putative risk factors for these behaviors will be identified, and the clinical disorder associated with the extreme abuse of these behaviors, muscle dysmorphia, will be examined.

Associations of neighbourhood greenness with physical and mental health : do walking, social coherence and local social interaction explain the relationships?

Background: Studies have shown associations between health indices and access to “green” environments but the underlying mechanisms of this association are not clear.

Objectives: To examine associations of perceived neighbourhood “greenness” with perceived physical and mental health and to investigate whether walking and social factors account for the relationships.

Methods: A mailed survey collected the following data from adults (n  =  1895) in Adelaide, Australia: physical and mental health scores (12-item short-form health survey); perceived neighbourhood greenness; walking for recreation and for transport; social coherence; local social interaction and sociodemographic variables.

Results: After adjusting for sociodemographic variables, those who perceived their neighbourhood as highly green had 1.37 and 1.60 times higher odds of better physical and mental health, respectively, compared with those who perceived the lowest greenness. Perceived greenness was also correlated with recreational walking and social factors. When walking for recreation and social factors were added to the regression models, recreational walking was a significant predictor of physical health; however, the association between greenness and physical health became non-significant. Recreational walking and social coherence were associated with mental health and the relationship between greenness and mental health remained significant.

Conclusions: Perceived neighbourhood greenness was more strongly associated with mental health than it was with physical health. Recreational walking seemed to explain the link between greenness and physical health, whereas the relationship between greenness and mental health was only partly accounted for by recreational walking and social coherence. The restorative effects of natural environments may be involved in the residual association of this latter relationship.

Are perceptions of the physical and social environment associated with mothers' walking for leisure and for transport? A longitudinal study

Objective
The role local neighbourhood environments play in influencing purpose-specific walking behaviors has not been well-explored in prospective studies. This study aimed to cross-sectionally and prospectively examine whether local physical and social environments were associated with mothers' walking for leisure and for transport.

Methods
In 2004, 357 mothers from Melbourne, Australia, provided information on their local physical and social neighbourhood environments, and in 2004 and 2006 reported weekly time spent walking for leisure and for transport. Environmental predictors of high levels of walking and increases in walking were examined using log binomial regression.

Results
Public transport accessibility and trusting many people in the neighbourhood were predictive of increases in walking for leisure, while connectivity, pedestrian crossings, a local traffic speed were predictive of increases in transport-related walking. Satisfaction with local facilities was associated with increasing both types of walking, and the social environment was important for maintaining high levels of both leisure- and transport-related walking.

Conclusion
The findings provide evidence of a longitudinal relationship between physical and social environments and walking behaviors amongst mothers. Enhancing satisfaction with local facilities and giving consideration to ‘walkability’, safety and public transport accessibility during environment planning processes may help mothers to increase walking.