A passage from India - Anglo Indians in Victoria : a community gallery exhibition

Drawing on cultural artefacts, images and interactive audio-visual material, this exhibition depicts a vivid portrait of the Anglo-Indian community in Australia.

Precipitate characterisation of an advanced high-strength low-alloy (HSLA) steel using atom probe tomography

Increased fuel economy, combined with the need for the improved safety has generated the development of new hot-rolled high-strength low-alloy (HSLA) and multiphase steels such as dual-phase or transformation-induced plasticity steels with improved ductility without sacrificing strength and crash resistance. However, the modern multiphase steels with good strength-ductility balance showed deteriorated stretch-flangeability due to the stress concentration region between the soft ferrite and hard martensite phases [1]. Ferritic, hot-rolled steels can provide good local elongation and, in turn, good stretch-flangeability [2]. However, conventional HSLA ferritic steels only have a tensile strength of not, vert, similar600 MPa, while steels for the automotive industry are now required to have a high tensile strength of not, vert, similar780 MPa, with excellent elongation and stretch-flangeability [1]. This level of strength and stretch-flangeability can only be achieved by precipitation hardening of the ferrite matrix with very fine precipitates and by ferrite grain refinement. It has been suggested that Mo [3] and Ti [4] should be added to form carbides and decrease the coiling temperature to 650 °C since only a low precipitation temperature can provide the precipitation refinement [4]. These particles appeared to be (Ti, Mo)C, with a cubic lattice and a parameter of 0.433 nm, and they were aligned in rows [4]. It was reported [4] that the formation of these very fine carbides led to an increase in strength of not, vert, similar300 MPa. However, the detailed analysis of these particles has not been performed to date due to their nanoscale size. The aim of this work was to carry out a detailed investigation using atom probe tomography (APT) of precipitates formed in hot-rolled low-carbon steel containing additions Ti and Mo.

The investigated low-carbon steel, containing Fe–0.1C–1.24Mn–0.03Si–0.11Cr–0.11Mo–0.09Ti–0.091Al at.%, was produced by hot rolling. The processing route has been described in detail elsewhere [5] European Patent Application, 1616970 A1, 18.01.2006.[5]. The microstructure was characterised by transmission electron microscopy (TEM) on a Philips CM 20, operated at 200 kV using thin foil and carbon replica techniques. Qualitative energy dispersive X-ray spectroscopy (EDXS) was used to analyse the chemical composition of particles. The atomic level of particle characterisation was performed at the University of Sydney using a local electrode atom probe [6]. APT was carried out using a pulse repetition rate of 200 kHz and a 20% pulse fraction on the sample with temperature of 80 K. The extent of solute-enriched regions (radius of gyration) and the local solute concentrations in these regions were estimated using the maximum separation envelope method with a grid spacing of 0.1 nm [7]. A maximum separation distance between the atoms of interest of dmax = 1 nm was used.

The microstructure of the steel consisted of two types of fine ferrite grains: (i) small recrystallised grains with an average grain size of 1.4 ± 0.2 μm; and (ii) grains with a high dislocation density (5.8 ± 1.4 × 1014 m−2) and an average grain size of 1.9 ± 0.1 μm in thickness and 2.7 ± 0.1 μm in length (Fig. 1a). Some grains with high dislocation density displayed an elongated shape with Widmanstätten side plates and also the formation of cells and subgrains (Fig. 1a). The volume fraction of recrystallised grains was 34 ± 8%.

Adaptive communal detection in search of adversarial identity crime

This paper is on adaptive real-time searching of credit application data streams for identity crime with many search parameters. Specifically, we concentrated on handling our domain-specific adversarial activity problem with the adaptive Communal Analysis Suspicion Scoring (CASS) algorithm. CASS's main novel theoretical contribution is in the formulation of State-of- Alert (SoA) which sets the condition of reduced, same, or heightened watchfulness; and Parameter-of-Change (PoC) which improves detection ability with pre-defined parameter values for each SoA. With pre-configured SoA policy and PoC strategy, CASS determines when, what, and how much to adapt its search parameters to ongoing adversarial activity. The above approach is validated with three sets of experiments, where each experiment is conducted on several million real credit applications and measured with three appropriate performance metrics. Significant improvements are achieved over previous work, with the discovery of some practical insights of adaptivity into our domain.

Peter Wilson

Peter Wilson, Australia's inspirational captain in 1974 at the World Cup in West Germany, seen here playing for the Western Suburbs in the Philips Soccer League (National Soccer League of Australia) in the 1970s.

A comparative study on accelerated weathering tests of wool fabrics

This work has used two lightboxes with Philips 500 W MBTF lamps for a comparative trial on the photoyellowing evaluation of untreated wool fabrics under dry and wet conditions. An investigation was made to account for different trends of photoyellowing of the same wool fabric when irradiated by the two lightboxes. The fabric specimens irradiated in one lamp experienced increasing yellowing with irradiation time while specimens from the same wool fabric but irradiated under the other lamp manifested no noticeable color change. These differences are attributed to the susceptibility of wool to small spectral differences between the two MBTF lamps. Furthermore, the color fading results obtained from the commonly used blue wool standard (BWS) references from L1 to L3 show that these reference materials could not effectively reveal changes caused by the spectral differences in two MBTF lamps. These results have important implications for conducting accelerated weathering tests on spectrum-sensitive textile materials, and considerable care should be taken when using BWSs to ensure reliable and consistent irradiation results.

Dancing doctorates downunder? Defining and assessing 'doctorateness' when embodiment enters the thesis

Assessment frames the focus of this paper, which emerges from our collaborative research, Dancing Between Diversity and Consistency: Refining Assessment in Postgraduate Degrees in Dance, funded by the Australian Learning and Teaching Council (ALTC). We examine the attributes of danced ‘doctorateness’, giving special attention to those factors in the Australian environment, which may endow resilience to concepts of excellence, independent thinking and originality when kinaesthetic knowledge becomes pivotal to research. Have the small pool of examiners and relationships between academia and the professional artistic environment shaped these doctorates in a particular way? Can these perspectives illuminate and forge parameters by which to legitimate danced insight? These and related issues are interrogated giving voice to supervisors, research deans, candidates and industry professionals across Australia who participated in this research project.

Race, place and self

This thesis examines, interrelates and contextualizes concepts of race, place and self by employing an amalgam of autobiography, interviews, literature, political analysis, infant research and psychoanalytic theory. Although the examples and narratives are South African based, principles that emerge have universal implications. Scars of apartheid mark oppressed, bystanders and beneficiaries.

Physical activity attenuates the effect of the FTO genotype on obesity traits in European adults: the Food4Me study

OBJECTIVE: To examine whether the effect of FTO loci on obesity-related traits could be modified by physical activity (PA) levels in European adults. METHODS: Of 1,607 Food4Me participants randomized, 1,280 were genotyped for FTO (rs9939609) and had available PA data. PA was measured objectively using accelerometers (TracmorD, Philips), whereas anthropometric measures [BMI and waist circumference (WC)] were self-reported via the Internet. RESULTS: FTO genotype was associated with a higher body weight [β: 1.09 kg per risk allele, (95% CI: 0.14-2.04), P = 0.024], BMI [β: 0.54 kg m(-2) , (0.23-0.83), P < 0.0001], and WC [β: 1.07 cm, (0.24-1.90), P = 0.011]. Moderate-equivalent PA attenuated the effect of FTO on BMI (P[interaction]  = 0.020). Among inactive individuals, FTO increased BMI by 1.06 kg m(-2) per allele (P = 0.024), whereas the increase in BMI was substantially attenuated among active individuals (0.16 kg m(-2) , P = 0.388). We observed similar effects for WC (P[interaction]  = 0.005): the FTO risk allele increased WC by 2.72 cm per allele among inactive individuals but by only 0.49 cm in active individuals. CONCLUSIONS: PA attenuates the effect of FTO genotype on BMI and WC. This may have important public health implications because genetic susceptibility to obesity in the presence of FTO variants may be reduced by adopting a physically active lifestyle.