Robust partial feedback linearizing excitation controller design for multimachine power systems

This paper presents a new robust nonlinear excitationcontroller design for synchronous generators in multimachine powersystems to enhance the transient stability. The mismatches betweenthe original power system model and formulated mathematical modelare considered as uncertainties which are modeled through thesatisfaction of matching conditions. The exogenous noises appearingfrom measurements are incorporated with the power system modelincluding the two-axis model of synchronous generators. The partialfeedback linearization technique is used to design the controller whichtransforms the original nonlinear multimachine power system modelinto several reduced-order linear and autonomous subsystems. Thedesired control law is obtained for each subsystem and implemented ina decentralized manner provided that the dynamics of the autonomoussubsystems have no effects on the overall stability of the system. Theanalysis related to the dynamics of noisy autonomous subsystems isalso included and the proposed controller has the excellent capabilityto decouple these noises. Finally, the performance of the proposedcontrol scheme is evaluated on an IEEE 39-bus benchmark powersystem following different types of large disturbances. The performanceof the proposed controller is compared to that of a partialfeedback linearizing controller, which is designed without robustnessproperties, to verify the effectiveness of the proposed control scheme.

Swing-up and stability control of Wheeled Acrobot (WAcrobot)

In this paper the Wheeled Acrobot (WAcrobot), a novel mechanical system consisting of an underactuated double inverted pendulum robot (Acrobot) equipped with actuated wheels, is described. This underactuated and highly nonlinear system has potential applications in mobile manipulators and leg-wheeled robots. It is also a testbed for researchers studying advanced methodologies in nonlinear control. The control system for swing-up of the WAcrobot based on collocated or non-collocated feedback linearisation to linearise the active or passive Degree Of Freedom (DOF) followed by Linear Quadratic Regulator (LQR) to stabilise the robot is discussed. The effectiveness of the proposed scheme is validated with numerical simulation. The numerical results are visualised by graphical simulation to demonstrate the correlation between the numerical results and the WAcrobot physical response.

Robust nonlinear distributed controller design for active and reactive power sharing in islanded microgrids

This paper presents a robust nonlinear distributed controller design for islanded operation of microgrids in order to maintain active and reactive power balance. In this paper, microgrids are considered as inverter-dominated networks integrated with renewable energy sources (RESs) and battery energy storage systems (BESSs), where solar photovoltaic generators act as RESs and plug-in hybrid electric vehicles as BESSs to supply power into the grid. The proposed controller is designed by using partial feedback linearization and the robustness of this control scheme is ensured by considering structured uncertainties within the RESs and BESSs. An approach for modeling the uncertainties through the satisfaction of matching conditions is also provided in this paper. The proposed distributed control scheme requires information from local and neighboring generators to communicate with each other and the communication among RESs, BESSs, and control centers is developed by using the concept of the graph theory. Finally, the performance of the proposed robust controller is demonstrated on a test microgrid and simulation results indicate the superiority of the proposed scheme under different operating conditions as compared to a linear-quadratic-regulator-based controller.

Robust nonlinear controller design for three-phase grid-connected photovoltaic systems under structured uncertainties

This paper presents a robust nonlinear controller design for a three-phase grid-connected photovoltaic (PV) system to control the current injected into the grid and the dc-link voltage for extracting maximum power from PV units. The controller is designed based on the partial feedback linearization approach, and the robustness of the proposed control scheme is ensured by considering structured uncertainties within the PV system model. An approach for modeling the uncertainties through the satisfaction of matching conditions is provided. The superiority of the proposed robust controller is demonstrated on a test system through simulation results under different system contingencies along with changes in atmospheric conditions. From the simulation results, it is evident that the robust controller provides excellent performance under various operating conditions. © 2014 IEEE.

Nonlinear controller design for vehicle-to-grid systems with output LCL filters

This paper presents a nonlinear controller design for vehicle-to-grid (V2G) systems with LCL output filters. The V2G systems are modeled with LCL output filters in order to eliminate harmonics for improving power qualities and the nonlinear controller is designed based on the feedback linearization. The feasibility of using the appropriate feedback linearization approaches, either partial or exact, is also investigated through the feedback linearizability of V2G systems. In this paper, partial feedback linearization is used to design the controller with a capability of sharing both active and reactive power in V2G systems. The performance of the proposed controller controller is evaluated on a single-phase full-bridge converter-based V2G system with an LCL output filter and compared to that of without any filter. Simulation results clearly demonstrate the harmonic elimination capabilities of the proposed V2G structure with the proposed control scheme.

An alternative LQR-based excitation controller design for power systems to enhance small-signal stability

This paper presents a new approach to design excitation controller for power systems to enhance small-signal stability. Partial feedback linearization scheme is used to design the controller for a linearized power system model which transforms a part of this model into a new system through linear coordinate transformation. In this paper, the excitation control law as a function of state variables is determined from the dynamics of the partly transformed new system provided that the controller stabilizes the remaining dynamics of the system which are not transformed through feedback linearization. The stability of the remaining dynamics is also discussed in this paper. Since the proposed control scheme uses state variables as feedback, it is analogous to a linear quadratic regulator (LQR) based excitation controller. Therefore, the performance of the proposed scheme is evaluated on a single machine infinite bus (SMIB) system and compared to that of an LQR controller.

Power conversion technology in the smart grid and EV

The chapter presents a dynamical model and power conversion technology of electric vehicles (EVs) used in smart grids. The efficient power conversion of EVs in smart grids depends on the operation of bi-directional converters as these EVs need to be either charged or discharged. In this chapter, the mathematical model of a bi-directional converter used in EVs is developed and a nonlinear controller is designed to facilitate the power conversion in the smart grid environments. Since the power conversion of EVs in smart grids requires the communication, a nonlinear partial feedback linearising distributed controller based on the communication with different EVs is proposed to ensure high power quality and system stability.

Transient stability enhancement of multimachine power systems using nonlinear observer-based excitation controller

This paper presents an approach to design a nonlinear observer-based excitation controller for multimachine power systems to enhance the transient stability. The controller is designed based on the partial feedback linearization of a nonlinear power system model which transforms the model into a reducedorder linear one with an autonomous dynamical part. Then a linear state feedback stabilizing controller is designed for the reduced-order linear power system model using optimal control theory which enhances the stability of the entire system. The states of the feedback stabilizing controller are obtained from the nonlinear observer and the performance of this observer-based controller is independent of the operating points of power systems. The performance of the proposed observer-based controller is compared to that of an exact feedback linearizing observer-based controller and a partial feedback linearizing controller without observer under different operating conditions.

Nonlinear DSTATCOM controller design for distribution network with distributed generation to enhance voltage stability

This paper presents a nonlinear controller design for a DSTATCOM connected to a distribution network with distributed generation (DG) to regulate the line voltage by providing reactive power compensation.The controller is designed based on the partial feedback linearization which transforms the nonlinear system into a reduced-order linear system and an autonomous system whose dynamics are known as internal dynamics of the system. This paper also investigates the stability of internal dynamics of a DSTATCOM as it is a basic requirement to design partial feedback linearizing controllers. The performance of the proposed controller is evaluated in terms reactive power compensation to enhance the voltage stability of distribution with DG.