Tanis: a link between type 2 diabetes and inflammation?

Here we describe a novel protein, which we have named Tanis, that is implicated in type 2 diabetes and inflammation. In Psammomys obesus, a unique polygenic animal model of type 2 diabetes and the metabolic syndrome, Tanis is expressed in the liver in inverse proportion to circulating glucose (P = 0.010) and insulin levels (P = 0.004) and in direct proportion with plasma triglyceride concentrations (P = 0.007). Hepatic Tanis gene expression was markedly increased (3.1-fold) after a 24-h fast in diabetic but not in nondiabetic P. obesus. In addition, glucose inhibited Tanis gene expression in cultured hepatocytes (P = 0.006) as well as in several other cell types (P = 0.001–0.011). Thus, Tanis seems to be regulated by glucose and is dysregulated in the diabetic state. Yeast-2 hybrid screening identified serum amyloid A (SAA), an acute-phase inflammatory response protein, as an interacting protein of Tanis, and this was confirmed by Biacore experiments. SAA and other acute-phase proteins have been the focus of recent attention as risk factors for cardiovascular disease, and we contend that Tanis and its interaction with SAA may provide a mechanistic link among type 2 diabetes, inflammation, and cardiovascular disease.

Skin friction coefficient on a yarn package surface in ring spinning

The skin friction coefficient on the surface of a rotating yarn package affects the power required to drive the package. This paper examines the relationship between the skin friction coefficient on the package surface and its diameter and rotating speed, based on the fundamentals of aerodynamics and the experimental results of power consumption. Skin friction coefficients on the surfaces of an airplane, car top, and yarn package are discussed. The results indicate that the skin friction coefficient on the package surface without hairiness depends on the package diameter and spindle speed only. The skin friction coefficient on the yarn package surface is about three times that on the top surface of a car, and is about twenty times that on an airplane surface. The power consumed to overcome skin friction drag is more than that consumed to drive the spindle if the spindle speed is very slow. However, the situation reverses when the spindle speed is fast.

Influence of the geometry of an immersed steel workpiece on mass transfer coefficient in a chemical heat treatment fluidised bed

The mass transfer during carburising in a fluidised bed and in a steel workpiece has been studied experimentally in this work. This involved carburising experiment in an electrically heated fluidised bed at 900–970°C with natural gas and air as the atmosphere. A steel workpiece was designed to provide a range of carbon transfer surfaces of different geometries in the fluidised bed, and the carbon transfer coefficient was measured at these surfaces. The carbon transfer coefficient was determined from the carbon distribution within the diffusion layer of the sample. An empirical relationship of the carbon potential as a function of carburising atmosphere, bed temperature and fluidising velocity was determined, based on the understanding of the mass transfer mechanism and analysis of the experimental results.

Application of bending under tension test to determine the effect of tool radius and the contact pressure on the coefficient of friction in sheet metal forming

To quantify the frictional behaviour in sheet forming operations, several laboratory experiments which simulate the real forming conditions are performed. The Bending Under Tension Test is one such experiment which is often used to represent the frictional flow of sheet material around a die or a punch radius. Different mathematical representations are used to determine the coefficient of friction in the Bending Under Tension Test. In general the change in the strip thickness in passing over the die radius is neglected and the radius of curvature to thickness ratio is assumed to be constant in these equations. However, the effect of roller radius, sheet thickness and the surface pressure are also omitted in some of these equations. This work quantitatively determined the effect of roller radius and the tooling pressure on the coefficient of friction. The Bending Under Tension Test was performed using rollers with different radii and also lubricants with different properties. The tool radii were found to have a direct influence in the contact pressure. The effect of roller radius on friction was considerable and it was observed that there is a clear relationship between the contact pressure and the coefficient of friction.

Performing on boards: the link between governance and corporate reputation in nonprofit arts boards

This paper is built on the hypothesis that good governance and reputation are inextricably linked. It takes the governance of performing arts organizations in Queensland, Australia as a case study, and focuses on the role of the nonprofit arts board and its practices of governance and measures of effectiveness. Because of the financial constraints under which arts companies operate, their sustainability relies on audiences and on government or corporate support. The reputation of the company flows from the board's capacity to manage finances, stakeholders and mission. In-depth interviews with board chairs and general managers revealed that strong management systems and rigorous financial reporting are the drivers of good governance. Innovation in product development and artistic excellence are secondary in reputation to these measures. The paper proposes a model of good governance for arts boards.

Decades of research efforts to link economic and environmental performance: still data in search of a theory?

With the proliferation of social investment vehicles, stakeholders, particularly investors, are increasingly aware of the relationship between economic, social and environmental performance, and disclosure to external parties. This is particularly evident in The Securities and Exchange Commission's Environmental Disclosure Rules. The thesis of this paper is that, after three decades of academic and professional research efforts, there are still no firm proactive guidelines to firmly link the financial performance with environmental and social performance. The purpose of this paper is to revisit empirical research efforts spanning three decades in order to delineate potential links that may assist in systematic, comparable reporting

Carburising and carbon transfer coefficient in a fluidised bed furnance

The carburising of a steel workpiece with complex geometry in a fluidised bed hasbeen studied experimentally. This involved carburising experiment in an electrically heated fluidised bed at 900 - 970°C with natural gas and air as the atmosphere. The carbon transfer coefficient at the workpiece surface and diffusivity within the workpiece were determined from the carbon distribution within the diffusion layer of the sample. A reverse method and the Levenberg-Marquardt algorithm were used in the calculations. The methodology of the reverses method to extract the carbon transfer coefficient and diffusivity is also discussed in some detail.

Teaching for life : generic capabilities that link university learning with workplace learning

Business schools are under increasing pressure to enhance the learning capability and employability of graduates. Business professional institutes and employer organizations are demanding more than the technical knowledge and skills required to perform discipline/professional specific tasks. They want graduates who can demonstrate capabilities in communication, teamwork, risk taking, decision making, problem solving, critical thinking, analytical reasoning, visioning and innovation, leadership, ethical practices, appreciation of diversity, and a commitment to social justice. Evidence in literature and reports (Karpin, 1995; Kirby, 2000; Commonwealth of Australia, 2002; Nelson, 2002) and in test data (McCowan & Richardson, 1998; Employer Survey, 1998; DETYA, 2000) shows that the employability gap7 is closed when graduates possess these generic capabilities. What is important, however, is the increasing research showing that the strategies used to develop generic capabilities lead to improved learning, both in university courses and in the workplace.

The link between judgements of comparative risk and own risk: Further evidence

Individuals typically believe that they are less likely than the average person to experience negative events, a phenomenon termed “unrealistic optimism”. The direct method of assessing unrealistic optimism employs a question of the form, “Compared with the average person, what is the chance that X will occur to you?”. However, it has been proposed that responses to such a question (direct-estimates) are based essentially just on estimates that X will occur to the self (self-estimates). If this is so, any factors that affect one of these estimates should also affect the other. This prediction was tested in two experiments. In each, direct- and self-estimates for an unfamiliar health threat—homocysteine-related heart problems—were recorded. It was found that both types of estimate were affected in the same way by varying the stated probability of having unsafe levels of homocysteine (Study 1, N = 149) and varying the stated probability that unsafe levels of homocysteine will lead to heart problems (Study 2, N = 111). The results are consistent with the proposal that direct-estimates are constructed just from self-estimates.

Distributed power control in cellular mobile radio systems with time-varying link gains

A simple distributed power control algorithm for communication systems with mobile users and unknown time-varying link gains is proposed. We prove that the proposed algorithm is exponentially converging. Furthermore, we show that the algorithm significantly outperforms the well-known Foschini and Miljanic algorithm in the case of quickly moving mobile users.

Is the link between nutrients and foods understood? The case of fibre and folate

Objectives: To assess and contrast awareness of the link between dietary fibre and folate and their major food sources (fruit, vegetables, bread and cereals).

Design and setting: Mailed questionnaire investigating changes made to dietary intake of fibre, folate, fruit, vegetables, bread and cereals in the previous six months.

Setting: The survey was conducted between June and November 1998 in the Australian Capital Territory.

Subjects: One thousand one hundred and twenty-six adults randomly selected from the electoral roll.

Results: More women than men in both older (50 + years) and younger (18–49 years) age groups reported increasing their consumption of folate, fibre, fruit and vegetables in the prior six months. In contrast, more men than women reported increased consumption of bread, cereals, rice and pasta in the previous six months. For food categories and fibre, less than 4% of respondents were unsure about changes in these food habits. However, 26% of men and women were ‘not sure’ about changes to folate intake. Similar proportions of men and women (about 33%) reported consuming more fruit, vegetables or cereal-based foods over the prior six months, yet only 6% of these men and 14% of these women reported consuming more folate. In contrast, 44% of men and 51% of women who reported consuming more plant foods also reported consuming more dietary fibre.

Conclusions: The results suggested that subjects, particularly the younger age group, had a poor understanding of the relationship between folate intake and its major food sources. The understanding of the relationship between fibre intake and its food sources appeared substantial, but confusion about specific food sources was still evident. These outcomes question the effectiveness of nutrition education used to date, particularly for the current priority of increasing folate intake in younger women in the new, ‘health claims’ environment.

The link between self-managed work teams and learning organisations using performance indicators

Both the learning organization literature and the self-managed work team literature have alluded to the potential links between teamwork and learning. However, as yet the link between these two concepts remains undeveloped. This study uses a survey of a random sample of 200 Australian organizations to empirically examine the relationships between self-managed work teams and the learning organization using performance indicators as a medium. It was found that the learning organization concept displays a moderate to strong link with three measures of performance used in this study: knowledge performance, financial performance and customer satisfaction. Although the self-managed work team concept did not display any significant relationship with performance, the qualitative component of the survey did emphasize that there is a common belief that self-managed teams can increase performance in the right setting. While an insignificant relationship between self-managed teams and the learning organization was also found, this study suggests some methodological concerns for future research into the relationship between self-managed teams and the learning organization.

Redistribution of glucose from skeletal muscle to adipose tissue during catch-up fat. A link between catch-up growth and later metabolic syndrome.

Catch-up growth, a risk factor for later obesity, type 2 diabetes, and cardiovascular diseases, is characterized by hyperinsulinemia and an accelerated rate for recovering fat mass, i.e., catch-up fat. To identify potential mechanisms in the link between hyperinsulinemia and catch-up fat during catch-up growth, we studied the in vivo action of insulin on glucose utilization in skeletal muscle and adipose tissue in a previously described rat model of weight recovery exhibiting catch-up fat caused by suppressed thermogenesis per se. To do this, we used euglycemic-hyperinsulinemic clamps associated with the labeled 2-deoxy-glucose technique. After 1 week of isocaloric refeeding, when body fat, circulating free fatty acids, or intramyocellular lipids in refed animals had not yet exceeded those of controls, insulin-stimulated glucose utilization in refed animals was lower in skeletal muscles (by 20–43%) but higher in white adipose tissues (by two- to threefold). Furthermore, fatty acid synthase activity was higher in adipose tissues from refed animals than from fed controls. These results suggest that suppressed thermogenesis for the purpose of sparing glucose for catch-up fat, via the coordinated induction of skeletal muscle insulin resistance and adipose tissue insulin hyperresponsiveness, might be a central event in the link between catch-up growth, hyperinsulinemia and risks for later metabolic syndrome.