2-(2-Pyridylamino)Pyridinium2-(2-Pyridylamino)pyridinium chloride phosphorous acid: one-dimensional hydrogen-bonded and [π]-[π] stacked supramolecular chains

In the crystal structure of the title compound, C₁₀H₁₀N₃⁺·Cl-^·[P(O)(OH)₂H], the chloride ion and phosphorous acid form a one-dimensional hydrogen-bonded chain, while the 2-(2-pyridylamino)pyridinium cations form a second chain through [π]-[π] stacking. The two parallel chains are connected via a PO...H-N hydrogen bond and a weak pyridinium-to-chloride interaction.

Static and metadynamic recrystallization of interstitial free steels during hot deformation

A rapid method was used to identify kinetics of the recrystallization for two IF (Interstitial Free) steels which have different phosphorous and boron contents. The static and metadynamic softening behaviour of the materials for a range of strain rates and temperatures were quantified. The critical strain for initiation of strain independent softening was estimated for the IF steels in respect to the time for 50 percent softening after deformation. The results showed that the strain for the initiation of strain independent softening (often referred to as metadynamic recrystallization) varies with the Zener Hollomon parameter. Classic static recrystallization was observed at strains below the strain independent softening for all processing conditions and the strain rate had a strong effect on the time for strain independent softening. Results also revealed that static and metadynamic recrystallization was delayed owing to the phosphorous and boron alloying elements. Hence, the large strain at above no-recrystallization temperature may be required for the early stage of Finishing Stands Unit (FSU) in hot strip rolling mills to initiate austenite grain refinement of phosphorous and boron added IF steels.

Spatial analysis of urban stormwater quality

Urban stormwater non-point source pollutants are recognized as a major cause of receiving waters quality deterioration. To date most research has focused on specifying temporal variations of stormwater quality parameters which includes high uncertainties and also increases the risk of pollution control structures failure. Traditionally, the temporal variations of quality parameters in forms of either pollutograph or Event Mean Concentration (EMC) is obtained by sampling stormwater at the outlet of urban catchments for quality analysis in addition to measurement of flow rate over years. Spatial variations of the runoff quality are the key factor in non-point source pollution studies. This research investigates spatial variability of urban runoff quality parameters such as Total Phosphorous (TP), Total Nitrogen (TN), Suspended Solids (SS) and Biochemical Oxygen Demands (BOD) in relation to land use of urban catchments. In spatial analysis, stormwater will be sampled over the whole catchment area for a number of rainfall events during a year without any requirement to measure flow rate. This research showed comparable results for average pollutant concentrations with those of other urban catchments in Australia where traditional sampling method was used. The research outcomes will reliably estimate pollutants concentration for improved and efficient design of pollution control structures for each land use.

Fisheries and cage culture of three reservoirs in west Java, Indonesia; a case study of ambitious development and resulting interactions

The interactions between cage culture and wild fishery activities in three Indonesian reservoirs, Saguling, Cirata and Jatiluhur, of the greater Ciratum watershed, West Java, were evaluated using historical data and interviews with cage culture operators. In all three reservoirs, cage culture of common carp, Cyprinus carpio L., and later of common carp and Nile tilapia, Oreochromis niloticus (L.), were encouraged as an alternative livelihood for persons displaced by the impoundment. Currently, a two-net culture system, locally known as 'lapis dua', in which in the inner cage (7 × 7 × 3 m) is used for common carp culture and the outer cage (7 × 7 × 5/7 m) is stocked with Nile tilapia, is practised. On average each cage is stocked with  approximately 100 kg fingerlings each of common carp and Nile tilapia. The numbers of cages and production of cultured fish has increased in the reservoirs, but total and per cage production began to decline from about 1995 in Saguling from 2200 kg cage−1 in 1989 to <500 kg cage−1 in 2002, and in Cirata from a peak of approximately 2300 kg cage−1 in 1995 to approximately 400 kg cage−1 in 2002. In Jatiluhur, which has a considerably lower cage density, total fish production and production per cage has increased since 2000, and currently is approximately 4000 kg cage−1, close to production in the early years of cage culture activities. The cage culture operations also resulted in substantial nutrient loading, estimated at 3.2, 15.2 and 3.1 t of nitrogen and 134, 636 and 128 kg of phosphorous per year in the maximum years of production for Saguling, Cirata and Jatiluhur reservoirs, respectively. In later years, when cage culture production was high, fish kills occurred in the cages, and in Jatiluhur reservoir coincided with a dramatic decline in wild fishery catches. An attempt is made to determine the maximum number of cages for each of the reservoirs that will bring long-term sustainability of cage culture operations and the wild fisheries in the three reservoirs.

End-Permian catastrophe by a bolide impact: evidence of a gigantic release of sulfur from the mantle

Our studies in southern China have revealed a remarkable sulfur and strontium isotope excursion at the end of the Permian, along with a coincident concentration of impact- metamorphosed grains and kaolinite and a significant decrease in manganese, phosphorous, calcium, and microfossils (foraminifera). These data suggest that an asteroid or a comet hit the ocean at the end of Permian time and caused a rapid and massive release of sulfur from the mantle to the ocean-atmosphere system, leading to significant oxygen consumption, acid rain, and the most severe biotic crisis in the history of life on Earth.

Trophic classification of non-perennial reservoirs utilized for the development of culture-based fisheries, Sri Lanka

The aim of this study was to check the suitability of some trophic models developed for temperate regions to classify the non-perennial reservoirs of Sri Lanka in order to manage culture-based fisheries of those reservoirs. A limnological study was carried out in 45 non-perennial reservoirs, which have been randomly selected for stocking of fish fingerlings for the development of culture-based fisheries. High total phosphorous (TP) content in relation to algal biomass indicates high non-algal turbidity in all reservoirs. Carlson's trophic state indices (TSI) measured on the basis of Secchi disc depth [TSI (SDD)], TP [TSI (TP)] and chlorophyll a [TSI (Chl-a)] show that the 45 reservoirs studied are characterized by TSI (TP) = TSI (SDD) > TSI (Chl-a), indicating that non-algal particulate matter or colour dominates underwater light attenuation. As TSI (Chl-a) is positively correlated to culture-based fisheries yield, it is useful for planning culture-based fisheries development strategies in non-perennial reservoirs of Sri Lanka, and has the potential to be used elsewhere in the tropics for comparable developments.

Bis(3-endo-camphoryl)phosphinic acid, a non-racemic helical supramolecular host with aquapores

Bis(3-endo-camphoryl)phosphinic acid (1) was prepared by the reaction of the lithium enolate of D-(+)-camphor and phosphorous trichloride followed by an oxidative work up. Compound 1 crystallizes from wet toluene as monohydrate 1·H2O, which was investigated by X-ray crystallography. Molecules of 1 are associated by strong hydrogen bonds giving rise to the formation of a supramolecular helix. The interior channel of the helix is filled by a one-dimensional (1D) string of water molecules that are also associated by hydrogen bonding. The 1D string adopts a twisted zigzag conformation. Although the hydrogen bond networks are not cross-linked both the screw of the helix and the twist of the 1D string of water molecules are left-handed (M) and controlled by the chiral camphoryl residues situated on the exterior of the helix. The overall supramolecular structure is strongly reminiscent of aquaporin-1, a significant membrane-channel protein responsible for the transport of water into the cells.

Nutrient and phytoplankton status of Lakes Purrumbete and Bullen Merri, western Victoria

The thesis investigates two adjacent volcanic maar lakes, with differences in chemical and biological properties. Lake Bullen Merri a brackish, phosphorous-limited lake that suffers from nuisance algal blooms and Lake Purrumbete a fresh, nitrogen-limited lake with diverse phytoplankton assemblage. Nutrient fluxes for both lakes are dominated by internal cycling.

Characterisation and impedance spectroscopy of substituted Li1.3Al0.3Ti1.7(PO4)3−x(ZO4)x (Z=V, Nb) ceramics*1

Lithium ion conducting ceramics based on the lithium aluminium titanium phosphate (LATP) NASICON structure have been prepared with various substitutions of the phosphorous. The effect of the processing method has been shown to be the key factor in determining the conductivity, both bulk and grain boundary, as well as the conductivity trends observed as a function of substitution.

Solid state NMR characterization of polyrrole : the nature of the dopant in PF6− doped films

³¹P and ¹⁹F solid state NMR have been used to study the nature of the PF₆− anion in polypyrrole films at various levels of oxidation. It appears that the symmetric PF₆− unit remains undistorted and unchanged throughout, suggesting that it is predominantly acting only as a counterion and not as a true ‘dopant’, since any distortion in the phosphorous environments would result at the very least in chemical shift anisotropy of the ³¹P nucleus. A second set of phosphorous and fluorine resonances, which are consistent with a difluoride phosphorous compound, appeared in the films. Upon electrochemical reduction of the polymer, the undistorted PF₆− anion leaves the film whereas the second phosphorous species remains. Re-oxidation of the polymer reverses the processes observed during reduction.

NMR studies of modified nasicon-like, lithium conducting solid electrolytes*1

²⁷Al, ³¹P and ⁷Li NMR measurements have been performed on lithium conducting ceramics based on the LiTi₂(PO₄)₃ structure with Al, V and Nb metal ions substituted for either Ti or P within the framework NASICON structure. The ²⁷Al magic angle spinning NMR measurements have revealed that, although Al is intended to substitute for octahedral Ti sites, additional substitution into tetrahedral environments (presumably phosphorous sites) occurs with increasing amount of Al addition. This tetrahedral substitution appears to occur more readily in the presence of vanadium, in Li_1+xAl_xTi_2−x(PO₄)_2.9(VO₄)_0.1, whereas similar niobium additions (in place of vanadium) appear to stifle tetrahedral substitution. ⁷Li static NMR spectra reveal quadrupolar structure with C_q approximately 42 kHz, largely independent of substitution. Measurement of the ⁷Li central transition linewidth at room temperature reveals a relatively mobile lithium species (300–900 Hz) with linewidth tending to decrease with Al substitution and increase with increasing V or Nb. This new structural information is discussed in the context of ionic conduction in these ceramics.

Solid state NMR analysis of polypyrrole grown in a phosphonium ionic liquid

³¹P, ¹⁹F and ¹³C solid state NMR analysis has been used to investigate the intercalation/de-intercalation of both anions and cations in electrochemically synthesized polypyrrole films. Use of a phosphonium-based ionic liquid, tri(hexyl)(tetradecyl)phosphonium bis(trifluoromethanesulfonyl)amide, allows the separate detection of the cation and anion by analysis of the phosphorous and fluorine resonances, respectively. Initial results indicate the incorporation of both cations and anions during film growth in the ionic liquid. There is a notable change in the ³¹P chemical shift of the cation on incorporation into the film, consistent with a significant change in environment compared to the pure ionic liquid. Despite its large size, the phosphonium cation can be completely expelled from the film by oxidation.

The effect of potential bias on the formation of ionic liquid generated surface films on Mg alloys

An electrochemical approach to the formation of a protective surface film on Mg alloys immersed in the ionic liquid (IL), trihexyl(tetradecyl)phosphonium–bis 2,4,4-trimethylpentylphosphinate, was investigated in this work. Initially, cyclic voltammetry was used with the Mg alloy being cycled from OCP to more anodic potentials. EIS data indicate that, under these circumstances, an optimum level of protection was achieved at intermediate potentials (e.g., 0 or 0.25 V versus Ag/AgCl). In the second part of this paper, a small constant bias was applied to the Mg alloy immersed in the IL for extended periods using a novel cell design. This electrochemical cell allowed us to monitor in situ surface film formation on the metal surface as well as the subsequent corrosion behaviour of the metal in a corrosive medium. This apparatus was used to investigate the evolution of the surface film on an AZ31 magnesium alloy under a potential bias (between ±100 mV versus open circuit) applied for over 24 h, and the film evolution was monitored using electrochemical impedance spectroscopy (EIS). A film resistance was determined from the EIS data and it was shown that this increased substantially during the first few hours (independent of the bias potential used) with a subsequent decrease upon longer exposure of the surface to the IL. Preliminary characterization of the film formed on the Mg alloy surface using ToF-SIMS indicates that a multilayer surface exists with a phosphorous rich outer layer and a native oxide/hydroxide film underlying this. The corrosion performance of a treated AZ31 specimen when exposed to 0.1 M NaCl aqueous solution showed considerable improvement, consistent with electrochemical data.

Scores on the dietary guideline index for children and adolescents are associated with nutrient intake and socio-economic position but not adiposity 1-3

Diet quality indices reflect overall dietary patterns better than single nutrients or food groups. The study aims were to develop a measure of adherence with dietary guidelines applicable to child and adolescent populations in Australia and determine the association between index scores and food and nutrient intake, socio-demographic characteristics, and measures of adiposity. Data were analyzed from 4- to 16-y-old participants of the 2007 Australian Children’s Nutrition and Physical Activity Survey (n = 3416). The Dietary Guideline Index for Children and Adolescents (DGI-CA) comprises 11 components: 5 core food groups, wholegrain bread, reduced-fat dairy foods, extra foods (nutrient poor and high in fat, salt, and added sugar), healthy fats/oils, water, and diet variety (possible score of 100). The index criteria were age specific. The mean DGI-CA score was low (53.6 ± 0.4), similar between boys and girls, and differed by age; the youngest children scored higher than the oldest children (P < 0.0001). Higher DGI-CA scores were associated with lower energy intake, energy density, total and saturated fat, and sugar intake; higher protein, carbohydrate, fiber, calcium, iron, vitamin C, vitamin A, folate, phosphorous, magnesium, zinc, and iodine intakes; and a higher polyunsaturated:saturated fat ratio (P < 0.0001). DGI-CA scores were associated with socio-economic characteristics and measures of family circumstance. Weak positive associations were observed between DGI-CA score and BMI or waist circumference Z-scores in the 4- to 10-y and 12- to 16-y age groups only. This index is the first validated index in Australia and one of the few international indices to describe the diet quality of children and adolescents.