Correlation between optical and SEM measurements of wool cortical cell size

Wool fibres consist of micro to nano scale protein constituents that could be used for innovative applications. While techniques for extracting these constituents or making wool fibres into organic powders have been developed, effectively dispersing the particles and accurately determining their size has been difficult in practice. In this study, an ultrasonic method was employed to disperse cortical cells extracted from wool fibres into an
immersion oil or ethanol. Specimens of the cortical cells were then observed under optical microscopy and scanning electron microscopy, respectively. Cell length and maximum cell diameter were measured to quantify the cell size. The results suggest significant discrepancies exist in the cortical cell size obtained from the two different measurement techniques. The maximum diameter of wool cortical cells obtained from the optical microscope was much larger than that from the scanning electron microscope, while the length was much shorter. A correction factor is given so that cortical cell size obtained from the two measurement techniques can be compared.

Refractive index tomography of turbid media by bifocal optical coherence refractometry

We demonstrate tomographic imaging of the refractive index of turbid media using bifocal optical coherence refractometry (BOCR). The technique, which is a variant of optical coherence tomography, is based on the measurement of the optical pathlength difference between two foci simultaneously present in a medium of interest. We describe a new method to axially shift the bifocal optical pathlength that avoids the need to physically relocate the objective lens or the sample during an axial scan, and present an experimental realization based on an adaptive liquid-crystal lens. We present experimental results, including video clips, which demonstrate refractive index tomography of a range of turbid liquid phantoms, as well as of human skin in vivo.

Measurement of the deformation and adhesion of solids in contact

Two curved surfaces of molecularly smooth mica are brought into contact under a controlled load, and their deformed shape is measured using optical interference fringes of equal chromatic order. This technique allows exceptionally accurate measurements of surface profiles at separations down to a molecular scale. Contact between the surfaces can be made either adhesive or nonadhesive by suitable choice of the medium between them. Results have been obtained in both cases and compared with the theories of Hertz (nonadhesive contact) and Johnson, Kendall, and Roberts (adhesive contact).

Extended studies on fibre diameter measurement with OFDA instrument

OFDA 2000 is a widely used fibre diameter measurement instrument. The instrument can provide improved statistical accuracy measurements in comparison with traditional technology. In this paper, a new technique has been developed to enable fibre diameters to be measured in an aqueous environment using the OFDA 2000 instrument. This new technique was utilised to assess the effects of pH and temperature on the diameters of Merino wool fibres in aqueous environments. Significant changes in fibre diameter under aqueous conditions were found as a function of pH and temperature. It is also demonstrated in this paper that the fibre diameter measurement results can be affected by fibre colour. In both dry and aqueous conditions, variation in fibre diameter was observed on fibres with different colours. This could be due to an optical effect or more likely due to physical changes in the dyed fibres as a result of the presence of dyes. Apart from their physical bulk, dyes may also affect the water content of fibres and hence have an influence on the swelling of fibres when they are measured under ambient regain and wet conditions.

Colour effect on fibre diameter measurement with OFDA 2000

In this study, wool samples from Merino, Corriedale and Lincoln sheep with a wide range of fibre diameters have been dyed and measured for fibre diameter using OFDA 2000 in both dry and conditioned states. Variation in fibre diameter is observed on fibres with different colours in both dry and aqueous conditions. This could be due to an optical effect or more likely due to physical changes in the dyed fibres owing to the presence of dyes. Apart from their physical bulk, dyes may also affect the owing water content of fibres and hence have an influence on the swelling of fibres when they are measured under ambient regain and wet conditions.

Investigation on the effect of cutting fluid pressure on surface quality measurement in high speed thread milling of brass alloy (C3600) and aluminium alloy (5083)

The quality of a machined finish plays a major role in the performance of milling operations, good surface quality can significantly improve fatigue strength, corrosion resistance, or creep behaviour as well as surface friction. In this study, the effect of cutting parameters and cutting fluid pressure on the quality measurement of the surface of the crest for threads milled during high speed milling operations has been scrutinised. Cutting fluid pressure, feed rate and spindle speed were the input parameters whilst minimising surface roughness on the crest of the thread was the target. The experimental study was designed using the Taguchi L32 array. Analysing and modelling the effective parameters were carried out using both a multi-layer perceptron (MLP) and radial basis function (RBF) artificial neural networks (ANNs). These were shown to be highly adept for such tasks. In this paper, the analysis of surface roughness at the crest of the thread in high speed thread milling using a high accuracy optical profile-meter is an original contribution to the literature. The experimental results demonstrated that the surface quality in the crest of the thread was improved by increasing cutting speed, feed rate ranging 0.41-0.45 m/min and cutting fluid pressure ranging 2-3.5 bars. These outcomes characterised the ANN as a promising application for surface profile modelling in precision machining.

In situ measurement of pipeline coating integrity and corrosion resistance losses under simulated mechanical strains and cathodic protection

A novel experimental assembly consisting of a specially designed tensile testing rig and a standard electrochemical flat cell has been designed for simulating buried high pressure pipeline environmental conditions in which a coating gets damaged and degrades under mechanical strain, and for studying the influence of mechanically induced damages such as the cracking of a coating on its anti-corrosion property. The experimental assembly is also capable of applying a cathodic protection (CP) potential simultaneously with the mechanical strain and environmental exposure. The influence of applied mechanical strain as well as extended exposure to the corrosive environment, coupled with the application of CP, has been investigated based on changes in electrochemical impedance spectroscopy (EIS). Preliminary results show that the amplitude of the coating impedance decreases with an increase in the applied strain level and the length of environmental exposure. The EIS characteristics and changes are found to correlate well with variations in coating cracking and degradation features observed on post-test samples using both optical microscopy and scanning electron microscopy. These results demonstrate that this new experimental method can be used to simulate and examine coating behaviour under the effects of complex high pressure pipeline mechanical, electrochemical and environmental conditions.