Reflectance response of tapered optical fiber coated with graphene oxide nanostructured thin film for aqueous ethanol sensing

In this work, optical sensing performance of tapered multimode fiber tip coated with graphene oxide (GO) nanostructured thin film towards aqueous ethanol with different concentrations is investigated. The tapering process of the optical fiber is done by a glass processing machine. The multimode optical fiber tip is dip-coated with GO and annealed at 70 °C to enhance the binding of the nanomaterials to the silica fiber. FESEM, Raman microscopy and XRD analyses are performed to micro-characterize the GO thin films. The morphology of the GO is observed to be in sheets forms. The reflectance response of the GO coated fiber tip is compared with the uncoated tip. The measurements are taken using a spectrophotometer in the optical wavelength range of 550-720 nm. The reflectance response of the GO coated fiber tip reduced proportionally, upon exposure to ethanol with concentration range of 5-80%. The dynamic response of the developed sensor showed strong reversibility and repeatability when it is exposed to ethanol with concentrations of 5%, 20% and 40% in distilled water. At room temperature, the sensor shows fast response and recovery as low as 19 and 25 s, respectively. © 2014 Elsevier B.V.

Guest editorial : In Journal of networks, v.7 n.3

Networking of computing devices has been going through rapid evolution and thus continuing to be an ever expanding area of importance in recent years. New technologies, protocols, services and usage patterns have contributed to the major research interests in this area of computer science. The current special issue is an effort to bring forward some of these interesting developments that are being pursued by researchers at present in different parts of the globe. Our objective is to provide the readership with some insight into the latest innovations in computer networking through this. This Special Issue presents selected papers from the thirteenth conference of the series (ICCIT 2010) held during December 23-25, 2010 at the Ahsanullah University of Science and Technology. The first ICCIT was held in Dhaka, Bangladesh, in 1998. Since then the conference has grown to be one of the largest computer and IT related research conferences in the South Asian region, with participation of academics and researchers from many countries around the world. Starting in 2008 the proceedings of ICCIT are included in IEEExplore. In 2010, a total of 410 full papers were submitted to the conference of which 136 were accepted after reviews conducted by an international program committee comprising 81 members from 16 countries. This was tantamount to an acceptance rate of 33%. From these 136 papers, 14 highly ranked manuscripts were invited for this Special Issue. The authors were advised to enhance their papers significantly and submit them to undergo review for suitability of inclusion into this publication. Of those, eight papers survived the review process and have been selected for inclusion in this Special Issue. The authors of these papers represent academic and/or research institutions from Australia, Bangladesh, Japan, Korea and USA. These papers address issues concerning different domains of networks namely, optical fiber communication, wireless and interconnection networks, issues related to networking hardware and software and network mobility. The paper titled “Virtualization in Wireless Sensor Network: Challenges and Opportunities” argues in favor of bringing in different heterogeneous sensors under a common virtual framework so that the issues like flexibility, diversity, management and security can be handled practically. The authors Md. Motaharul Islam and Eui-Num Huh propose an architecture for sensor virtualization. They also present the current status and the challenges and opportunities for further research on the topic. The manuscript “Effect of Polarization Mode Dispersion on the BER Performance of Optical CDMA” deals with impact of polarization mode dispersion on the bit error rate performance of direct sequence optical code division multiple access. The authors, Md. Jahedul Islam and Md. Rafiqul Islam present an analytical approach toward determining the impact of different performance parameters. The authors show that the bit error rate performance improves significantly by the third order polarization mode dispersion than its first or second order counterparts. The authors Md. Shohrab Hossain, Mohammed Atiquzzaman and William Ivancic of the paper “Cost and Efficiency Analysis of NEMO Protocol Entities” present an analytical model for estimating the cost incurred by major mobility entities of a NEMO. The authors define a new metric for cost calculation in the process. Both the newly developed metric and the analytical model are likely to be useful to network engineers in estimating the resource requirement at the key entities while designing such a network. The article titled “A Highly Flexible LDPC Decoder using Hierarchical Quasi-Cyclic Matrix with Layered Permutation” deals with Low Density Parity Check decoders. The authors, Vikram Arkalgud Chandrasetty and Syed Mahfuzul Aziz propose a novel multi-level structured hierarchical matrix approach for generating codes of different lengths flexibly depending upon the requirement of the application. The manuscript “Analysis of Performance Limitations in Fiber Bragg Grating Based Optical Add-Drop Multiplexer due to Crosstalk” has been contributed by M. Mahiuddin and M. S. Islam. The paper proposes a new method of handling crosstalk with a fiber Bragg grating based optical add drop multiplexer (OADM). The authors show with an analytical model that different parameters improve using their proposed OADM. The paper “High Performance Hierarchical Torus Network Under Adverse Traffic Patterns” addresses issues related to hierarchical torus network (HTN) under adverse traffic patterns. The authors, M.M. Hafizur Rahman, Yukinori Sato, and Yasushi Inoguchi observe that dynamic communication performance of an HTN under adverse traffic conditions has not yet been addressed. The authors evaluate the performance of HTN for comparison with some other relevant networks. It is interesting to see that HTN outperforms these counterparts in terms of throughput and data transfer under adverse traffic. The manuscript titled “Dynamic Communication Performance Enhancement in Hierarchical Torus Network by Selection Algorithm” has been contributed by M.M. Hafizur Rahman, Yukinori Sato, and Yasushi Inoguchi. The authors introduce three simple adapting routing algorithms for efficient use of physical links and virtual channels in hierarchical torus network. The authors show that their approaches yield better performance for such networks. The final title “An Optimization Technique for Improved VoIP Performance over Wireless LAN” has been contributed by five authors, namely, Tamal Chakraborty, Atri Mukhopadhyay, Suman Bhunia, Iti Saha Misra and Salil K. Sanyal. The authors propose an optimization technique for configuring the parameters of the access points. In addition, they come up with an optimization mechanism in order to tune the threshold of active queue management system appropriately. Put together, the mechanisms improve the VoIP performance significantly under congestion. Finally, the Guest Editors would like to express their sincere gratitude to the 15 reviewers besides the guest editors themselves (Khalid M. Awan, Mukaddim Pathan, Ben Townsend, Morshed Chowdhury, Iftekhar Ahmad, Gour Karmakar, Shivali Goel, Hairulnizam Mahdin, Abdullah A Yusuf, Kashif Sattar, A.K.M. Azad, F. Rahman, Bahman Javadi, Abdelrahman Desoky, Lenin Mehedy) from several countries (Australia, Bangladesh, Japan, Pakistan, UK and USA) who have given immensely to this process. They have responded to the Guest Editors in the shortest possible time and dedicated their valuable time to ensure that the Special Issue contains high-quality papers with significant novelty and contributions.

Optical microsensor for counting food substance particles in lab-on-a-chips

Integrated optical detection is considered to be an important operation in lab-on-a-chips. This paper presents an optical fiber-based micro-sensor that is capable of detecting food substance particles in a lab-on-a-chip. The system consists of a microcontroller and associated circuitry, a laser emitter, a laser receiver, fiber optic cables, a microfluidics chip, and the food substance samples to be tested. When the particles flow through the microfluidic channel in the chip, the receiver’s output voltage varies due to the particles blocking the passage of the laser ray. The changes in the collected signals are analyzed to count the number of particles. Experiments are conducted on several food substance samples including talcum powder, ground ginger, and soy sauce. The experimental results are presented and discussed.

Evaluation of the fineness of degummed bast fibers

Fiber fineness characteristics are important for yarn production and quality. In this paper, degummed bast fibers such as hemp, flax and ramie have been examined with the Optical Fiber Diameter Analyzer (OFDA100 and OFDA2000) systems for fiber fineness, in comparison with the conventional image analysis and the Wira airflow tester. The correlation between the results from these measurements was analysed. The results indicate that there is a significant linear co-relation between the fiber fineness measurement results obtained from those different systems. In addition, the mean fiber width and its coefficient of variation obtained from the OFDA100 system are smaller than those obtained from the OFDA2000 system, due to the difference in sample preparation methods. The OFDA2000 system can also measure the fiber fineness profile along the bast fiber plants, which can be useful for plant breeding.

Evolution of optogenetic microdevices

Implementation of optogenetic techniques is a recent addition to the neuroscientists' preclinical research arsenal, helping to expose the intricate connectivity of the brain and allowing for on-demand direct modulation of specific neural pathways. Developing an optogenetic system requires thorough investigation of the optogenetic technique and of previously fabricated devices, which this review accommodates. Many experiments utilize bench-top systems that are bulky, expensive, and necessitate tethering to the animal. However, these bench-top systems can make use of power-demanding technologies, such as concurrent electrical recording. Newer portable microdevices and implantable systems carried by freely moving animals are being fabricated that take advantage of wireless energy harvesting to power a system and allow for natural movements that are vital for behavioral testing and analysis. An investigation of the evolution of tethered, portable, and implantable optogenetic microdevices is presented, and an analysis of benefits and detriments of each system, including optical power output, device dimensions, electrode width, and weight is given. Opsins, light sources, and optical fiber coupling are also discussed to optimize device parameters and maximize efficiency from the light source to the fiber, respectively. These attributes are important considerations when designing and developing improved optogenetic microdevices.