Coaches' perceptions of golf swing kinematics

Using a computer-based videotape analysis system, a randomized series of golf swings was presented to 10 professional and 10 amateur golf coaches in an attempt to determine differences m their internal model of golf swing kinematics. A global measure was obtained by having coaches independently inspect the swings of eight golfers and estimate their golf handicaps. A micro level of analysis was undertaken by requiring participants to indicate what they considered to be 'ideal' swing characteristics using 17 predetermined limb, club, and body position angles for various phases of the swing Videotaped swings for a highly skilled and beginner level golfer were used for this task. Although the training requirements for professional coaches are much more demanding and their playing ability higher, evidence of internal model differences was not found in the handicap estimation task. It was also established that a golfer's swing may be perceived to have deficiencies but still produce sufficient accuracy to engender a low handicap On the second task, only one of the 17 estimated swing angles showed a significant difference between the coach groups. When, however, the two coach groups indicated their preferred angles for the highly skilled golfer and the beginner, 6 of the 17 angles were significantly different. The implications of these findings are that the two coach groups had similar ability to identify fundamental characteristics of the golf swing, but their model of the ideal swing was influenced by the observed golfer's skill level.

Visual perception of movement kinematics and the acquisition of "action prototypes"

Recognizing a class of movements as belonging to a "nominal" action category, such as walking, running, or throwing, is a fundamental human ability. Three experiments were undertaken to test the hypothesis that common ("prototypical") features of moving displays could be learned by observation. Participants viewed moving stick-figure displays resembling forearm flexion movements in the saggital plane. Four displays (presentation displays) were first presented in which one or more movement dimensions were combined with 2 respective cues: direction (up, down), speed (fast, slow), and extent (long, short). Eight test displays were then shown, and the observer indicated whether each test display was like or unlike those previously seen. The results showed that without corrective feedback, a single cue (e.g., up or down) could be correctly recognized, on average, with the proportion correct between .66 and .87. When two cues were manipulated (e.g., up and slow), recognition accuracy remained high, ranging between .72 and .89. Three-cue displays were also easily identified. These results provide the first empirical demonstration of action-prototype learning for categories of human action and show how apparently complex kinematic patterns can be categorized in terms of common features or cues. It was also shown that probability of correct recognition of kinematic properties was reduced when the set of 4 presentation displays were more variable with respect to their shared kinematic property, such as speed or amplitude. Finally, while not conclusive, the results (from 2 of the 3 experiments) did suggest that similarity (or "likeness") with respect to a common kinematic property (or properties) is more easily recognized than dissimilarity.

High-precision five-axis machine for high-speed material processing using linear motors and parallel-serial kinematics

The paper describes some details of the mechanical and kinematics design of a five-axis mechanism. The design has been utilized to physically realize an industrial-scale five-axis milling machine that can carry a three KW spindle. However, the mechanism could be utilized in other material processing and factory automation applications. The mechanism has five rectilinear joints/axes. Two of these axes are arranged traditionally, i.e. in series, and the other three axes utilize the concept of parallel kinematics. This combination results in a design that allows three translational and two rotational two-mode degrees of freedom (DOFs). The design provides speed, accuracy and cost advantages over traditional five-axis machines. All axes are actuated using linear motors.

Asymmetrical three-DOFs rotational-translational parallel-kinematics mechanisms based on lie group theory

The paper introduces four families of three-DOFs translational-rotational Parallel-Kinematics Mechanisms (PKMs) as well as the mobility analysis of such families using Lie group theory. Two of these families are mechanisms with one-rotational two-translational degrees of freedom (DOFs) and each of the other two has one-translational two-rotational DOFs. Four novel mechanisms are presented and discussed as representatives of these four families. Although these mechanisms are asymmetric, the components used to realise them are very similar and, hence, there is no great departure from the favourable modularity of parallel-kinematics mechanisms.

Two-mode overconstrained three-DOFs rotational-translational linear-motor-based parallel-kinematics mechanism for machine tool applications

The paper introduces a family of three-DOFs translational-rotational Parallel-Kinematics Mechanisms (PKMs) as well as the mobility analysis of such family using Lie-group theory. Each member of this family has two-rotational one-translational DOFs. A novel mechanism is presented and analyzed as a representative of that family. The use and the practical value of that modular mechanism are emphasized.

Occupant satisfaction with workplace design in new and old environments

Purpose: – The aim of this paper is to investigate time-factors in occupant-environment relationships.

Design/methodology/approach: – The paper analyses satisfaction ratings on 12 workplace environment features collected from more than 5,000 occupants in 48 office buildings in Australia. The database is divided into seven environment categories: first occupied after construction; new occupation after major update; recent relocation into an existing environment; re-occupying an environment after refurbishment; relocation of workspace in an existing environment; acclimatised occupation of a refurbished workspace; and continued occupation of an existing environment. Cumulative frequency profiles of the collected ratings for each of these categories are analysed qualitatively and quantitatively.

Findings: – The study shows that updated environments which are occupied by the same organisation before and after refurbishment are more successful than environments which are occupied by a new organisation after update. New buildings provide the greatest number of satisfied occupants. While many workplace design aspects are successfully addressed in newly designed and updated environments, satisfaction with acoustic and visual design features is equally poor in all investigated environment categories.

Originality/value: – The study develops understanding of which environment categories, defined by the duration of the occupant-environment relationships, are most successful in providing satisfying design features. The study thereby provides advice for facility management decision making.

Indoor environment quality and occupant productivity in the CH2 building

This paper presents a summary of the results from a post-occupancy evaluation study on indoor environment quality (lEO) and occupant health, wellbeing and productivity in the Council House 2 (CH2) building, which is owned and occupied by the City of Melbourne. This case study has highlighted that the productivity of office building occupants can potentially be enhanced through good building design, and provision of a high quality, healthy, comfortable and functional interior environment, that takes account of basic occupant needs.

Complexity, age and motor competence effects on fine motor kinematics

Prehension is a fundamental skill usually performed as part of a complex action sequence in everyday tasks. Using an information processing framework, these studies examined the effects of task complexity, defined by the number of component movement elements (MEs), on performance of prehension tasks. Of interest was how motor control and organisation might be influenced by age and/or motor competence. Three studies and two longitudinal case studies examined kinematic characteristics of prehension tasks involving one-, two- and three-MEs: reach and grasp (low-complexity); reach, grasp and object placement (moderate-complexity); and reach, grasp and double placement of object (high-complexity). A pilot study established the suitability of tasks and procedures for children aged 5-, 8- and 11-years and showed that responses to task complexity and object size manipulations were sensitive to developmental changes, with increasing age associated with faster movements. Study 2 explored complexity and age effects further for children aged 6- and 11-years and adults. Increasing age was associated with shorter and less variable movement times (MTs) and proportional deceleration phases (%DTs) across all MEs. Task complexity had no effect on simple reaction time (SRT), suggesting that there may be little preprogramming of movements beyond the first ME. In addition, MT was longer and more on-line corrections were evident for the high- compared to the moderate-complexity task for ME1. Task complexity had a greater influence on movements in ME2 and ME3 than ME1. Adults, but not children, showed task specific adaptations in ME2. Study 3 examined performance of children with different levels of motor competence aged between 5- and 10-years. Increasing age was associated with shorter SRTs, and MTs for ME1 only. A decrease in motor competence was associated with greater difficulty in planning and controlling movements as indicated by longer SRTs, higher %DTs and more on-line corrections, especially in ME2. Task complexity affected movements in all MEs, with a greater influence on ME1 compared to Study 2. Findings also indicated that performance in MEs following prehension may be especially sensitive to motor competence effects on movement characteristics. Case studies for two children at risk of Developmental Coordination Disorder (DCD) revealed two different patterns of performance change over a 16-17 month period, highlighting the heterogeneous nature of DCD. Overall, findings highlighted age-related differences, and the role of motor competence, in the ability to adapt movements to task specific requirements. Results are useful in guiding movement education programmes for children with both age-appropriate and lower levels of motor competence.

A review of occupant control on natural ventilation

According to IPCC (Intergovernmental Panel on Climate Change), the largest use of energy in commercial buildings is space heating in colder climates and air conditioning in hot climates. In Europe, the Directive on the energy performance of buildings EPBD (European Energy Performance of Buildings Directive) [1] provides a framework for national building performance regulations and calculation procedures. However, there are often large discrepancies between calculated and measured energy performance of buildings. One main reason is the behaviour of occupants, which is often not reflected in calculation models.

Change in running kinematics after cycling are related to alterations in running economy in triathletes

Emerging evidence suggests that cycling may influence neuromuscular control during subsequent running but the relationship between altered neuromuscular control and run performance in triathletes is not well understood. The aim of this study was to determine if a 45 min high-intensity cycle influences lower limb movement and muscle recruitment during running and whether changes in limb movement or muscle recruitment are associated with changes in running economy (RE) after cycling. RE, muscle activity (surface electromyography) and limb movement (sagittal plane kinematics) were compared between a control run (no preceding cycle) and a run performed after a 45 min high-intensity cycle in 15 moderately trained triathletes. Muscle recruitment and kinematics during running after cycling were altered in 7 of 15 (46%) triathletes. Changes in kinematics at the knee and ankle were significantly associated with the change in VO₂ after cycling (p < 0.05). The change in ankle angle at foot contact alone explained 67.1% of the variance in VO₂. These findings suggest that cycling does influence limb movement and muscle recruitment in some triathletes and that changes in kinematics, especially at the ankle, are closely related to alterations in running economy after cycling.

Multi-owner low-cost housing management in Malaysia : effects of owner-occupant characteristics and occupancy rates

Purpose – Homeownership is considered both economically and socially beneficial for homeowners. However, in the collective living arrangement, reaching a consensus with regard to the residential environment is difficult. The purpose of this paper is to identify factors that can reduce the conflict among the stakeholders in multi-owner low-cost housing in Malaysia.
Design/methodology/approach – This study tested three hypotheses examining whether the demographic and socio-economic characteristics of owner-occupants and occupancy rates affect owner-occupants' satisfaction with stakeholders' relationships. Data were collected through questionnaires from owner-occupants of multi-owner low-cost settlements in Selangor state. Data on housing characteristics were collected from chairpersons of the respective owners' organisations. The data were treated as parametric, and analysis of variance was conducted.
Findings – Four factors – number of children in the family, duration of residency, participation in social activities and participation in meetings – were found to affect owners-occupants' satisfaction with the stakeholders' relationships. The significant effect of occupancy rates was also indicated.
Practical implications – The Management Corporations (MCs) should encourage social relationships among residents. To avoid conflict, the costs and benefits of participation must be balanced. Policy makers should take two key aspects seriously: owner-managed strategy practices by the MCs and high rates of tenant-residents. A mechanism should be identified for assisting the MCs in housing management and for protecting the benefits of homeownership for owner-occupants.
Originality/value – Past studies on low-income household settlements examined public housing or low-income homeowners of single detached dwellings. This study adds to the existing body of knowledge by examining low-income homeowners in multi-owner low-cost settlements.

Occupant interaction with interior environment in Greek dwellings during summer

User behaviour significantly affects energy consumption simulation estimates, which can consequently influence architectural design decisions at an early stage. Different regional behavioural patterns could, therefore, hinder the applicability of certain architectural and environmental strategies. Through questionnaires analysis and field studies, this study investigates the pattern use of manual control of windows, shading and air condition units, in residential buildings in Greece, during summer. Initial findings of the analysis indicate significant interaction of Greek residents with the building shell, in their effort to maintain comfort.

Occupant satisfaction of Star Rated Houses in Victoria, Australia

The Victorian government implemented legislation for all new houses to achieve a 6 star rating since May 2011. It is found that having a higher star rating would provide financial and environmental benefits, however the question remains- is this sufficient to satisfy the occupants living in such houses? Are the occupants actually satisfied with the amount of money they have invested in their home? This study investigates the level of satisfaction of occupants living in different star rated houses, and explores if there is a link between the star rating of the house and the satisfaction of the occupants living in such houses.