Structure effect on the oxygen permeation properties of barium bismuth iron oxide membranes

In this work, we investigated the oxygen permeation properties of barium bismuth iron oxide within the family of [Ba_2−3xBi_3x−1][Fe_2xBi_1−2x]O_2+3x/2 for x = 0.17–0.60. The structure changed progressively from cubic to tetragonal and then to hexagonal as function of x in accordance with the different relative amounts of bismuth on A-site and B-site of ABO_3−δ perovskite lattices. We found that the oxygen flux and electrical conductivity correlated strongly, and it was prevalent for the cubic structure (x = 0.33–0.40) which conferred the highest oxygen flux of 0.59 ml min⁻¹ cm⁻² at 950 °C for a disk membrane x = 0.33 with a thickness of 1.2 mm. By reducing the thickness of the disk membrane to 0.8 mm, the oxygen flux increased to 0.77 ml min⁻¹ cm⁻², suggesting both surface kinetics and ion diffusion controlled oxygen flux, though the former was more prominent at higher temperatures. For disk membranes x = 0.45–0.60, the perovskite structure changed to tetragonal and hexagonal, and the oxygen flux was insignificant below 900 °C, clearly indicating electron conduction properties only. However, for two compositions with relatively high bismuth content, e.g. x = 0.55 and 0.60, there was a sudden and significant rise of oxygen permeability above 900 °C, by more than one order of magnitude. These materials changed conduction behavior from metallic to semiconductor at around 900 °C. These results suggest the advent of mixed ionic electronic conducting properties caused by the structure transition as bismuth ions changed their valence states to compensate for the oxygen vacancies formed within the perovskite lattices.

Direct synthesis and strong cathodoluminescence of Al2O3 nanotubes

α-Al₂O₃ nanotubes were synthesized in bulk quantity by using simple physical evaporation of pure aluminum powders at 1000 °C. Field emission scanning electron microscopy and transmission electron microscopy observations show that the nanotubes have diameters smaller than 100 nm and lengths up to several microns. Cathodoluminescence measurements revealed a strong luminescence band in the wavelength range of 280–380 nm centered at 330 nm, which could be attributed to the oxygen vacancies in the α-Al₂O₃ nanotubes. Sacrificial template model is regarded as the possible formation mechanism of the nanotubes.

Controlled synthesis and characterization of 10 nm thick Al2O3 nanowires

α-Al₂O₃ nanowires, with diameter around 10 nm, were synthesized in bulk quantity by heating the mixture of pure aluminum and graphite powders at 900 °C. Scarcity of oxygen is regarded as the reason for the growth of the small diameter α-Al₂O₃ nanowires at relatively low temperature. The product was characterized by field emission scanning electron microscopy, high-resolution transmission electron microscopy and photoluminescence. The Oxygen vacancies in the nanowires lead to the strong photoluminescence in the wavelength range of 400–700 nm with its peak at 527 nm.

Hydrothermal synthesis of V0.13Mo0.87O2.935 nanowires with strong blue photoluminescence

Hexagonal V0.13Mo0.87O2.935 nanowires were hydrothermally synthesized at 220 °C for the first time. X-ray diffraction and field-emission scanning electron microscopy were utilized to characterize the phase and morphology of the nanowires, respectively. Transmission electron microscopy and selected area electron diffraction indicate that the nanowires are single crystalline, growing along the [001] direction. Interestingly, the nanowires easily become amorphous under the electron irradiation. The comparative hydrothermal experiments show that the molar ratio between the starting reagents of Mo and NH4VO3 plays a vital role in the anisotropic growth of nanowires. The photoluminescence measurement demonstrates that these nanowires exhibit two strong emission peaks at 420 and 438 nm, which are probably related to the intrinsic oxygen vacancies.

Electrospun granular hollow SnO2 nanofibers hydrogen gas sensors operating at low temperatures

In this paper, we present H2 gas sensors based on hollow and filled, well-aligned electrospun SnO2 nanofibers, operating at a low temperature of 150 C. SnO2 nanofibers with diameters ranging from 80 to 400 nm have been successfully synthesized in which the diameter of the nanofibers can be controlled by adjusting the concentration of polyacrylonitrile in the solution for electrospinning. The presence of this polymer results in the formation of granular walls for the nanofibers. We discussed the correlation between nanofibers morphology, structure, oxygen vacancy contents and the gas sensing performances. X-ray photoelectron spectroscopy analysis revealed that the granular hollow SnO2 nanofibers, which show the highest responses, contain a significant number of oxygen vacancies, which are favorable for gas sensor operating at low temperatures. © 2014 American Chemical Society.

Decoration of nitrogen vacancies by oxygen atoms in boron nitride nanotubes

Decoration of nitrogen vacancies by oxygen atoms has been studied by near-edge X-ray absorption fine structure (NEXAFS) around B K-edge in several boron nitride (BN) structures, including bamboo-like and multi-walled BN nanotubes. Breaking of B-N bonds and formation of nitrogen vacancies under low-energy ion bombardment reduces oxidation resistance of BN structures and promotes an efficient oxygen-healing mechanism, in full agreement with some recent theoretical predictions. The formation of mixed O-B-N and B-O bonds is clearly identified by well-resolved peaks in NEXAFS spectra of excited boron atoms.