Water repellency, near-saturated infiltration and preferential solute transport in a macroporous clay soil

Little attention has been paid to the possibility that soil water repellency could enhance non-equilibrium water flow and solute transport through macropores present in structured clay soils. In this study, we measured infiltration and solute transport in a clay soil under near-saturated conditions in both the field using tension infiltrometers and in the laboratory on undisturbed soil columns. Measurements were made on adjacent plots under grass and continuous arable cultivation. Steady-state field infiltration rates measured using water and ethanol as the infiltrating fluids demonstrated that the soil macroporosity under grass was better developed, but that much of the structural pore system was inactive due to water repellency. No water repellency was detected on the arable plot disturbed by tillage. Dye tracing showed that the conducting macroporosity was largely comprised of earthworm channels in the grassed plot and inter-aggregate voids resulting from ploughing in the arable plot. Tracer breakthrough curves measured on field-dry soil indicated rapid macropore transport in columns taken from both plots, although the degree of non-equilibrium transport appeared somewhat stronger under grass. This result, which was attributed to water repellency, was also consistent with the larger flow-weighted mean pore size found in the field infiltration experiments. It is concluded that water repellency in undisturbed structured clay soils can have significant effects on the occurrence of non-equilibrium water and solute transport in macropores.

Multimodal nanostructured titanium using severe plastic deformation

In the present study, multimodal nanostructured titanium was engineered using severe plastic deformation. The multimodal structured titanium exhibits an ultrahigh strength of over 940 MPa and a large failure elongation of 24%. The ultrahigh strength is mainly derived from the nanostructured structures; whilst the exceptional ductility originates from the large fraction of high angle grain boundaries, micro-scale structures, and the non-equilibrium grain boundary configuration. It is worth noting that apart from dislocation slip processes, the formation of deformation twins reduced the effective slip distance and increased the strain hardening capacity via the Hall-Petch mechanism, leading to high ductility of the multimodal structured titanium.

The effect of simulated thermomechanical processing on the transformation behavior and microstructure of a low-carbon Mo-Nb linepipe steel

The present work investigates the transformation behavior of a low-carbon Mo-Nb linepipe steel and the corresponding transformation product microstructures using deformation dilatometry. The continuous cooling transformation (CCT) diagrams have been constructed for both the fully recrystallized austenite and that deformed in uniaxial compression at 1148 K (875 °C) to a strain of 0.5 for cooling rates ranging from 0.1 to about 100 K/s. The obtained microstructures have been studied in detail using electron backscattered diffraction complemented by transmission electron microscopy. Heavy deformation of the parent austenite has caused a significant expansion of the polygonal ferrite transformation field in the CCT diagram, as well as a shift in the non-equilibrium ferrite transformation fields toward higher cooling rates. Furthermore, the austenite deformation has resulted in a pronounced refinement in both the effective grain (sheaf/packet) size and substructure unit size of the non-equilibrium ferrite microstructures. The optimum microstructure expected to display an excellent balance between strength and toughness is a mix of quasi-polygonal ferrite and granular bainite (often termed “acicular ferrite”) produced from the heavily deformed austenite within a processing window covering the cooling rates from about 10 to about 100 K/s.

Rock slope risk analysis based on non-linear failure criterion

The probability of failure of a rock slope is generally estimated by using the Limit Equilibrium Method (LEM) in conjunction with a reliability analysis. Although the LEM is relatively simple and time efficient, recent studies have indicated that using the LEM may overestimate the factor of safety by 21%, when based on a non-linear failure criterion. Fortunately, the solutions presented by Li et al. (2008, 2009) can provide more accurate evaluations for rock slope stability as the numerical upper and lower bound limit analysis methods (2002a, 2002b, 2005) were employed. The advantages of these methods are used in this study to assess the rock slope probability of failure. The motivation is that with more accurate methods to evaluate the factor of safety, more economic designs can be performed.

Optimal second best taxation of addictive goods in dynamic general equilibrium: a revenue raising perspective

In this paper we derive conditions under which optimal tax rates for addictive goods exceed tax rates for non-addictive consumption goods within a rational addiction framework where exogenous government spending cannot be financed with lump sum taxes. We reexamine classic results on optimal commodity taxation and find a rich set of new findings. Two dynamic effects exist. First, households anticipating higher future addictive tax rates reduce current addictive consumption, so they will be less addicted when the tax rate increases. Therefore, addictive tax revenue falls prior to the tax increase. Surprisingly, the optimal tax rate on addictive goods is generally decreasing in the strength of tolerance, since strong tolerance strengthens this tax anticipation effect. Second, high current tax rates on addictive goods make households less addicted in the future, affecting all future tax revenues in a way which depends on how elasticities are changing over time. Classic results on uniform commodity taxation emerge as special cases when elasticities are constant and the addiction function is homogeneous of degree one. Finally, we also study features of addictive goods such as complementarity to leisure that, while not directly related to the definition of addiction, are nonetheless properties many addictive goods display.

Formation of dynamic duolayer systems at the air/water interface by using non-ionic hydrophilic polymers

The inclusion of a water-soluble polymer, poly(vinyl pyrrolidone) (PVP), into a surface active film composition before application to the water surface leads to the formation of a dynamic duolayer; a novel surface film system. This duolayer shows improved surface viscosity over the monolayer compound alone, while the addition of polymer maintains other film properties such as evaporation control and equilibrium spreading pressure. Brewster Angle Microscopy shows that the duolayer film undergoes a different formation mechanism upon film compression, and the resultant surface pressure/area isotherm is different at lower surface pressures indicating the PVP is present on the water surface at these pressures and squeezed out to the water subphase at higher pressures. The addition of water-soluble polymers to form a dynamic duolayer provides a unique way to produce defect-free and tightly packed films while polymer is associated with the film. This finding provides new knowledge for the design of surface films with improved properties with potential applications in many areas.