Patterned growth and cathodoluminescence of conical boron nitride nanorods

We demonstrate a simple and effective approach for growing large-scale, high-density, and well-patterned conical boron nitride nanorods. A catalyst layer of Fe(NO₃)₃ was patterned on a silicon substrate by using a copper grid as a mask. The nanorods were grown via annealing milled boron carbide powders at 1300 °C in a flow of nitrogen gas. The as-grown nanorods exhibit uniform morphology and the catalyst pattern precisely defines the position of nanorod deposition. Cathodoluminescence (CL) spectra of the nanorods show two broad emission bands centered at 3.75 and 1.85 eV. Panchromatic CL images reveal clear patterned structure

Field-emission characteristics of conical boron nitride nanorods

We present the electron field-emission (FE) characteristics of conical boron nitride nanorods grown on a (1 0 0) n-type silicon substrate. The emission current can be up to ~60 µA at an applied voltage of ~3 kV. Two distinct slopes are evident in the Fowler–Nordheim (FN) plot. The FE characteristics can be explained using a site-related tunnelling-controlled mechanism. The occurrence of two FN slopes is attributed to the switchover from tip emission to side emission, which results from the differences in interface barrier, geometry, as well as the total emission area of the two emission interfaces.

Conical boron nitride nanorods synthesized via the ball-milling and annealing method

A boron nitride (BN) nanostructure, conical BN nanorod, has been synthesized in a large quantity on Si substrates for the first time via the ball-milling and annealing method. Nitridation of milled boron carbide (B₄C) powders was performed in nitrogen gas at 1300°C on the surface of the substrates to form the BN nanorods. The highly crystallized nanorods consist of conical BN basal layers stacked along the nanorod axis. Ball milling of the B₄C powders can significantly enhance the nitridation of the powders and thus facilitate the formation of nanorods during the annealing process.

Growth and structure of prismatic boron nitride nanorods

Prismatic boron nitride nanorods have been grown on single crystal silicon substrates by mechanical ball-milling followed by annealing at 1300 °C. Growth takes place by rapid surface diffusion of BN molecules, and follows heterogeneous nucleation at catalytic particles of an Fe/Si alloy. Lattice imaging transmission electron microscopy studies reveal a central axial row of rather small truncated pyramidal nanovoids on each nanorod, surrounded by three basal planar BN domains which, with successive deposition of epitaxial layers adapt to the void geometry by crystallographic faceting. The bulk strain in the nanorods is taken up by the presence of what appear to be simple nanostacking faults in the external, near-surface domains which, like the nanovoids are regularly repetitive along the nanorod length. Growth terminates with a clear cuneiform tip for each nanorod. Lateral nanorod dimensions are essentially determined by the size of the catalytic particle, which remains as a foundation essentially responsible for base growth. Growth, structure, and dominating facets are shown to be consistent with a system which seeks lowest bulk and surface energies according to the well-known thermodynamics of the capillarity of solids.

A novel approach for real mass transformation from V2O5 particles to nanorods

A solid-state, mass-quantity transformation from V2O5 powders to nanorods has been realized via a two-step approach. The nanorods were formed through a controlled nanoscale growth from the nanocrystalline V2O5 phase created by a ball milling treatment. The nanorods grow along the [010] direction and are dominated by {001} surfaces. Surface energy minimization and surface diffusion play important roles in their growth mechanism. Real large quantity production can be achieved when the annealing process is conducted in a fluidized bed which can treat large quantities of the milled materials at once. The crystal orientation of nanorods provides an improved cycling stability for lithium intercalation.

Titanium oxide nanorods extracted from ilmenite sands

One dimensional titanium oxides (TiO2) nanorods and nanowires have substantial applications in photocatalytic, nanoelectronic, and photoelectrochemical areas. These applications require large quantities of materials and a production technique suitable for future industry fabrication. We demonstrate here a new method for mass production of TiO2 nanorods from mineral ilmenite sands (FeTiO3). In this process, powder mixtures of ilmenite and activated carbon were first ball milled; the milled samples were then heated twice at two different temperatures. First high-temperature annealing produced metastable titanium oxide phases, and subsequent second low-temperature annealing in N2-5%H2 activates the growth of rutile nanorods. This solid-state growth process allows large-quantity production of rutile nanorods.

One-dimensional growth of TiO2 nanorods from ilmenite sands

Growth mechanisms of TiO₂ nanorods synthesized from mineral ilmenite using ball milling and annealing method have been systematically investigated. Two annealing processes are needed to grow the nanorods. The heating rate and gaseous environment in the first annealing step are critical to the formation of intermediate phases; these and the annealing atmosphere in the second heating play very important roles in nanorod growth. One-dimensional growth of the nanorods induced by low-temperature annealing in nitrogen plus hydrogen is possibly driven by atom vacancy diffusion in addition to surface diffusion.

Growth of V2O5 nanorods from ball-milled powders and their performance in cathodes and anodes of lithium-ion batteries

The two-stage procedure of ball milling and annealing in air represents a prospective method of preparing nanorods of V₂O₅ with electrochemical properties suitable for the application in lithium-ion batteries. Commercially purchased V₂O₅ powder is milled in a ball mill as the first step of the synthesis. The as-milled precursor is subsequently annealed in air to produce the morphology of nanorods via solid-state recrystallization. We have recently investigated intermediate stages of the formation of nanorods, and this paper summarizes the synthesis method including the description of the current understanding of the growth mechanism. The obtained V₂O₅ nanorods have been assessed as an electrode material for both anodes and cathodes of lithium-ion batteries. When used in cathodes, the nanorods demonstrate a better retention of capacity upon cycling than that of the commercially available powder of V₂O₅. When used in anodes, the performances of nanorods and the reference V₂O₅ powder are similar to a large extent, which is related to a different operating mechanism of V₂O₅ in anodes. The experimentally observed capacity of V₂O₅ nanorods in an anode has stabilized at the level of about 450 mAh/g after few cycles.

Two-photon endomicroscopy for 3D imaging of cancer cells labelled with gold nanorods

Biofunctional nanorods are developed to specifically target cancer cells. The cervical cancer cells, HeLa cells, are labeled by these biofunctional gold nanorods. Those cancer cells can be detected by a multi-photon-excited photoluminescence endomicroscope, which proves that the cancers can be in vivo diagnosed by using biofunctional gold nanorods with nonlinear endomicroscopy.

Two-photon imaging and photothermal therapy of cancer cells using biofunctional gold nanorods

Transferrin-conjugated gold nanorods were used for targeting, two-photon imaging and photothermal therapy of cancer cells. The presence of nanorods significantly reduced the laser power effective for therapy.

Photothermally induced apoptosis of cancer cells using gold nanorods for low energy cancer therapy

Gold nanorods functionalised with transferrin were used for photothermally induced necrosis and apoptosis of cancer cells. It was observed that the laser energy required to induce cell apoptosis is significantly lower than that for cell necrosis, indicating that photothermally induced apoptosis can be used for medically safe laser cancer treatment.

Enhanced photothermal therapy assisted with gold nanorods using a radially polarized beam

We report on the use of a radially polarized beam for photothermal therapy of cancer cells labeled with gold nanorods. Due to a three-dimensionally distributed electromagnetic field in the focal volume, the radially polarized beam is proven to be a highly efficient laser mode to excite gold nanorods randomly oriented in cancer cells. As a result, the energy fluence for effective cancer cell damage is reduced to one fifth of that required for a linearly polarized beam, which is only 9.3% of the medical safety level.