Terrain characteristics influencing aquifer salinisation of the Glenelg-Hopkins CMA region, using GIS

Salinisation of aquifers is an issue of great concern in the Glenelg-Hopkins region. The GlenelgHopkins region is located in south-west Victoria, south of the Great Dividing Range and covers 2.6 million hectares. The area receives an annual average rainfall of 500-910 mm and experiences a Mediterranean climate, with hot, dry summers and cold wet winters and has varied geology and soil types. Terrain characteristics, such as soil type, geology, depth-to-water table, land use and topography have been integrated into a Geographic Information System (GIS). A geostatistical approach, including the use of multiple linear regression is used to analyse the spatial variability of the relationships between aquifer salinity and terrain characteristics across the entire region. Results from this study should greatly improve knowledge of aquifer salinisation across the region. It is expected that this work will enable managers to determine the most appropriate mitigating measures for each specific area affected.

Status of tailings dumps : let D5s go working in the past?

It was decided in the De Beers v Ataqua Mining (Pty) Ltd that ''tailings dumps'' created by mining companies before the Mineral and Petroleum Resources Development Act, 28 of 2002 ("the MPRDA") came into operation are not governed by its provisions because such dumps are not "residue stockpiles" or "residue deposits" for purposes of the MPRDA. Ownership of tailings dumps is determined by the common law principles of accession. Ownership of a movable dump has to be transferred by one of the recognised forms of delivery of movables. Processing of these dumps will, however, still be subject to compliance with South African environmental, health and safety laws in general. It is submitted that mine dumps or tailings dumps created upon the exercise of "old order mining rights" before the commencement of the MPRDA and even after commencement of the MPRDA until eventual termination of the "old order mining rights" are not subject to the extensive, mining, environmental, empowerment provisions of the MPRDA. Termination of "old order mining rights" takes place upon: (i) refusal of an application for conversion of a mining right during (or even after) the period of transition, (ii) conversion into and registration of new order mining rights during (or even after) the period of transition or (iii) termination of unconverted "old order mining rights" on 30 April 2009. To the extent that this decision has made it possible to embark on a shorter and less cumbersome route in the reprocessing and eventual disappearance of most tailings dumps, it is to be welcomed from an economical, environmental, job creation and aesthetic perspective. Proposed amendments to the MPRDA to undo the impact of the De Beers decision should be carefully considered against these mentioned benefits and a possible finding that it may amount to an expropriation without compensation.

Public perceptions of the causes and prevention of obesity among primary school children

OBJECTIVE: To investigate lay perceptions of the causes and prevention of obesity among primary school children.

DESIGN: A cross-sectional survey of randomly selected sample of adults in a shopping centre.

SUBJECTS: 315 adults in Melbourne, Australia.

MEASUREMENTS: Subjects completed a self-completion questionnaire, in which they rated the importance of 25 possible causes of obesity and the importance of 13 preventive measures on four-point scales: not important; quite important; very important; extremely important. Demographic information about the respondents' age, sex, marital status, education level and parental status was also collected.

RESULTS: The most important reported causes of childhood obesity were related to overconsumption of unhealthy food, parental responsibility, modern technology and the mass media. The most popular prevention activities were associated with specific actions aimed at children. Principal components analysis of the causes data revealed eight factors, provisionally named: parental responsibility, modern technology and media, overconsumption of unhealthy food, children's lack of knowledge and motivation, physical activity environment, lack of healthy food, lack of physical activity and genes. Two prevention factors were also derived, named government action and children's health promotion. Parents saw modern technology and media, and government activities as more important causes, and government policy as a more important means of prevention than nonparents and men. Women's responses tended to be similar to those of parents. There were few educational differences, although nontertiary educated respondents reported that modern technology and media were more important causes of obesity than did the tertiary educated.

CONCLUSION: The findings suggest that the public appears to hold quite sophisticated views of the causes and prevention of children's obesity. They suggest that a number of prevention strategies would be widely supported by the public, especially by parents.

Design of reduced-order scalar functional observers

In the existing literature, the existence conditions and design procedures for scalar functional observers are available for the cases where the observers’ order p is either p=1 or p=(v-1), where v is the observability index of the matrix pair (C,A). Therefore, if an observer with an order p=1 does not exist, the other available option is to use a higher order observer with p=(v-1). This paper shows that there exists another option that can be used to design scalar linear functional observers of the order lower than the well-known upper bound (v-1). The paper provides the existence conditions and a design procedure for scalar functional observers of order 0≤ p ≤2, and demonstrates the presented results with a numerical example.

Existence and design of reduced-order scalar functional observers

In the existing literature, the existence conditions and design procedures for scalar functional observers are available for the cases where the observers’ order p is either p=1 or p=(v-1), where v is the observability index of the matrix pair (C,A). Therefore, if an observer with an order p=1 does not exist, the other option is to use a high-order observer with p=(v-1). This paper provides the existence conditions and a design procedure for scalar functional observers of order 0≤p≤2, and demonstrates the presented results with a numerical example. where K, M, E, H and G are constant matrices to be designed. The problem of observing a scalar functional or multi functionals (z(t)∈Rk , k>1) of the state vector has been the subject of numerous papers, and different algorithms have been proposed (see, [1]-[13] and references therein). There are also papers that deal with the order reduction of multi-dimensional functional observers [9,10,12,13]. For scalar functional observers, a well-known Luenberger’s classic result [1] provides an upper bound on the order with p=(v-1). It is interesting to note here that, except for a recent result of Darouach [12,13], little results have been reported on the order reduction for scalar functional observers.

Money laundering trends in South Africa

Reports a study by the Centre for the Study of Economic Crime at Rand Afrikaans University into the characteristics of money laundering schemes in South Africa; these were discussed at a workshop on December 5 2001. Outlines the 1998 Proceeds of Crime Act (POCA), the 1992 Drugs and Drug Trafficking Act and their general money laundering provisions, including negligence and intent, defence and penalties; also the racketeering provisions of POCA. Moves on to the reporting of suspicious transactions, where the POCA provisions will be repealed by the new Financial Intelligence Centre Act (FICA); this covers general obligations, secrecy and confidentiality, penalties, preventing tipping-off, and reporting statistics. Gives examples of the schemes themselves, which fall into broad themes: purchase of goods and properties, abuse of businesses and financial institutions, cash and currency, and the informal sector; case studies include S v Dustigar, Motsepe v Commissioner of Inland Revenue, S v Van Zyl, S v Caswell, and Director of Public Prosecutions: Cape of Good Hope v Bathgate.

Experimental and numerical evaluation of forming and fracture behaviour of high strength steel

Car manufacturers are under pressure to reduce vehicle mass while maintaining comfort and passenger safety for current and future vehicles. To meet this demand the steel industry has developed Advanced High Strength Steels (AHSS) that promise higher strength and improved formability compared to conventional steel grades. Even though significant research has already been performed to evaluate the material properties and forming behaviour of most AHSS types, only a limited literature is available on their necking and fracture behaviour and the effect on formability. This paper examines and compares the thinning, necking and fracture behaviour of two AHSS and one conventional steel type, namely TRIP, DP and HSLA. Uniaxial, plane and biaxial strain conditions are investigated by tensile, cup drawing and stretch forming tests and by using numerical methods. The test results indicate that significant differences exist in necking and fracture behaviour between all three steel types.

Neuromuscular performance and bone structural characteristics in young healthy men and women

Muscle mass and strength have been shown to be important factors in bone strength. Low muscular force predisposes to falling especially among elderly. Regular exercise helps to prevent falls and resulting bone fractures. Better understanding of muscle function and its importance on bone properties may thus add information to fracture prevention. Therefore the purpose of this study was to examine the relationship between bone strength and muscular force production. Twenty-young men [24 (2) years] and 20 [24 (3) years] women served as subjects. Bone compressive (BSId) and bending strength indices (50 Imax) were measured with peripheral quantitative computed tomography (pQCT) at tibial mid-shaft and at distal tibia. Ankle plantarflexor muscle volume (MV) was estimated from muscle thickness measured with ultrasonography. Neuromuscular performance was evaluated from the measurements of maximal ground reaction force (GRF) in bilateral jumping and of eccentric maximal voluntary ankle plantarflexor torque (MVC). Specific tension (ST) of the plantarflexors was calculated by dividing the MVC with the muscle volume. Activation level (AL) was measured with superimposed twitch method. Distal tibia BSId and tibial mid-shaft 50 Imax correlated positively with GRF, MVC and MV in men (r = 0.45–0.67, P\0.05). Tibial mid-shaft 50 Imax and neuromuscular performance variables were correlated in women (r = 0.46–0.59, P\0.05), whereas no correlation was seen in distal tibia. In the regression analysis, MV and ST could explain 64% of the variance in tibial mid-shaft bone strength and 41% of the variation in distal tibia bone strength. The study emphasizes that tibial strength is related to maximal neuromuscular performance. In addition, tibial mid-shaft seems to be more dependent on the neuromuscular performance, than distal tibia. In young adults, the association between bone adaptation and neuromuscular performance seems to be moderate and also site and loading specific.

Three-month bilateral hopping intervention is ineffective in initiating bone biomarker response in healthy elderly men.

In animal studies, bone adaptation has been initiated successfully without the transient force spike associated with high impact exercises. Consequently, a 12-week bilateral hopping on the balls of the feet intervention was conducted. 25 elderly men (age 72(SD4) years, height 171(6) cm, weight 75(9) kg) were randomly assigned into exercise and control groups. Ten subjects in each group completed the study. Carboxyterminal propeptide of type I collagen (CICP), bone-specific alkaline phosphatase (bALP) and carboxyterminal telopeptide of type I collagen (CTx) were measured from venous blood samples at baseline, at 2 weeks and at the end of the intervention. Maximal ground reaction force (GRF), osteogenic index (OI) and jump height (JH) were determined from bilateral hopping test and balance was assessed with velocity of center of pressure (COPvelocity) while standing on the preferred leg with eyes open. The intervention consisted of 5–7 sets of 10 s timed bilateral hopping exercise at 75–90% intensity three times/week. There was no significant group 9 time interaction for GRF, OI and JH (P = 0.065). GRF (11% change from baseline vs. 4%), OI (15 vs. 6%) and COPvelocity (-10 vs. -1%) were not influenced by the intervention (P[0.170), while the control group improved JH (P = 0.031) (2 vs. 18%). For the biomarkers, no effect was observed in MANOVA (P = 0.536) or in univariate analyses (P = 0.082 to P = 0.820) (CICP -2 vs. -3%, CTx 8 vs. -12%, bALP 0 vs. -3.7%). Allowing transient impact force spikes may be necessary to initiate a bone response in elderly men as the intervention was ineffective.

Seventy-year-old habitual volleyball players have larger tibial cross-sectional area and may be differentiated from their age-matched peers by the osteogenic index in dynamic performance

The osteogenicity of a given exercise may be estimated by calculating an osteogenic index (OI) consisting of magnitude and rate of strain. Volleyball involves repetitive jumping and requires high power output and thus may be expected to be beneficial to bone and performance. The purpose of the present study was to examine if habitual volleyball playing is reflected in OI. Ten elderly habitual volleyball players [age 69.9 (SD 4.4) years] and ten matched controls volunteered [age 69.7 (4.2) years] as subjects. Distal tibia (d), tibial mid-shaft (50) and femoral neck (F) bone characteristics were measured using pQCT and DXA. To estimate skeletal rigidity, cross-sectional area (ToA50), and compressive (BSId) and bending strength indices (SSImax50) were calculated. Maximal performance was assessed with eccentric ankle plantar flexion, isometric leg press and countermovement jump (CMJ). A fast Fourier transform (FFT) was calculated from the acceleration of the center of mass during the CMJ. Maximal acceleration (MAG) and mean magnitude frequency (MMF) were selected to represent the constituents of OI. OI was calculated as the sum of the products of magnitudes and corresponding frequencies. Volleyball players had 7% larger ToA50 and 37% higher power in CMJ, 15% higher MAG and 36% higher OI (P B 0.047) than the matched controls. No difference was observed in leg press, plantar flexion or the MMF (P C 0.646). In conclusion, habitual volleyball players may be differentiated from their matched peers by their dynamic jumping performance, and the differences are reflected in the magnitude but not rate of loading.