Superhydrophobic polyimide films with a hierarchical topography : combined replica molding and layer-by-layer assembly

Artificial superhydrophobic surfaces with a hierarchical topography were fabricated by using layer-by-layer assembly of polyelectrolytes and silica nanoparticles on microsphere-patterned polyimide precursor substrates followed with thermal and fluoroalkylsilane treatment. In this special hierarchical topography, micrometer-scale structures were provided by replica molding of polyamic acid using two-dimensional arrays of polystyrene latex spheres as templates, and nanosized silica particles were then assembled on these microspheres to construct finer structures at the nanoscale. Heat treatment was conducted to induce chemical cross-linking between polyelectrolytes and simultaneously convert polyamic acid to polyimide. After surface modification with fluoroalkylsilane, the as-prepared highly hydrophilic surface was endowed with superhydrophobicity due to the bioinspired combination of low surface energy materials and hierarchical surface structures. A superhydrophobic surface with a static water contact angle of 160 degrees and sliding angle of less than 10 degrees was obtained. Notably, the polyimide microspheres were integrated with the substrate and were mechanically stable. In addition, the chemical and mechanical stability of the polyelectrolyte/silica nanoparticle multilayers could be increased by heat-induced cross-linking between polyelectrolytes to form nylon-like films, as well as the formation of interfacial chemical bonds.

Confucian primers in dynastic China : tracing ethical molding to earliest times

Confucianism served the dynastic rulers of China well in their control of the education system as part of maintaining their reign for over 2,000 years, yet very little academic literature exists in the West on this important topic. This book examines the key ideological concepts of the canonized Confucian texts, accumulated from the 4th century BC onward, in the search of understanding the traditions of Chinese society, which appear to have always emphasized hierarchical relationships, harmony and stability rather than individualism, innovation, equity and fairness. By analyzing the ethical contents in Confucian primers produced in dynastic China, this study should help shed some light on how generations of Chinese children were cultivated to value passivity, submissiveness, acceptance of fate and maintenance of the status quo. This book provides a comprehensive resource for both undergraduates and specialists of comparative education. It will also be useful to China scholars or anyone else who shares an interest in Chinese history and philosophy.

Molding micropatterns of elasticity on PEG-based hydrogels to control cell adhesion and migration

We present an innovative and simple, soft UV lithographic method “FIll-Molding In Capillaries” (FIMIC) that combines soft lithography with capillary force driven filling of micro-channels to create smooth hydrogel substrates with a 2D micro-pattern on the surface. The lithographic procedure involves the molding of a polymer; in our case a bulk PEG-based hydrogel, via UV-curing from a microfabricated silicon master. The grooves of the created regular line pattern are consequently filled with a second hydrogel by capillary action. As a result, a smooth surface is obtained with a well-defined pattern design of the two different polymers on its surface. The FIMIC method is very versatile; the only prerequisite is that the second material is liquid before curing in order to enable the filling process. In this specific case we present the proof of principle of this method by applying two hydrogels which differ in their crosslinking density and therefore in their elasticity. Preliminary cell culture studies on the fabricated elasticity patterned hydrogels indicate the preferred adhesion of the cells to the stiffer regions of the substrates, which implies that the novel substrates are a very useful platform for systematic cell migration studies, e.g. more fundamental investigation of the concept of “durotaxis”

Hybrid hierarchical patterns of gold nanoparticles and poly(ethylene glycol) microstructures

Hybrid surface micro-patterns composed of topographic structures of polyethylene glycol (PEG)-hydrogels and hierarchical lines of gold nanoparticles (Au NPs) were fabricated on silicon wafers. Micro-sized lines of Au NPs were first obtained on the surface of a silicon wafer via “micro-contact deprinting”, a method recently developed by our group. Topographic micro-patterns of PEG, of both low and high aspect ratio (AR up to 6), were then aligned on the pre-patterned surface via a procedure adapted from the soft lithographic method MIMIC (Micro-Molding in Capillaries), which is denoted as “adhesive embossing”. The result is a complex surface pattern consisting of alternating flat Au NP lines and thick PEG bars. Such patterns provide novel model surfaces for elucidating the interplay between (bio)chemical and physical cues on cell behavior.

Electrically conductive graphene-filled polymer composites with well organized three-dimensional microstructure

Electrically conductive graphene-filled polystyrene nanocomposites with well-organized three dimensional (3D) microstructures were simply prepared by electrostatic assembly integrated latex technology. First, positively charged polystyrene was synthesized via disperse polymerization in ethanol/water medium by using a cationic co-monomer, and then directly co-assembled with graphene oxide. Eventually, a honeycomb-like graphene 3D framework was embedded in polystyrene matrix after in situ chemical reduction and hot compression molding. Due to the 3D conductive pathway derived from graphene based network evidenced by morphology studies, the fabricated nanocomposites show excellent electrical properties, i.e. extremely low percolation threshold of 0.09 vol% and high saturated conductivity of 25.2 S/m at GNs content of 1.22 vol%. © 2014 Elsevier B.V.