A simple displacement-based quadrilateral laminated composite plate element - part I : linear analysis

Based on the first-order shear deformation theory (FSDT) and Timoshenko's laminated composite beam functions, a simple displacement-based 4-node, 24-dof quadrilateral laminated plate element is proposed in this paper for linear analysis of thin to moderately thick laminates. The deflection and rotation functions of the element boundary are obtained from the Timoshenko's laminated composite beam functions, hence convergence to the thin plate solution can be achieved theoretically and shear-locking problem is avoided naturally. The in-plane displacement functions of a quadrilateral plane element with drilling degrees of freedom are taken as the in-plane displacements of the proposed quadrilateral element. Some numerical examples of linear analysis of composite laminated plates are calculated, and the results show that the proposed element is convergent, shear-locking free, efficient, accurate and not sensitive to mesh distortion.

A simple displacement-based quadrilateral laminated composite plate element : Part II : linear analysis

The 4-node, 24-dof quadrilateral displacement-based element (Zhang et al. 2004), which have been developed successfully for linear analysis of thin to thick laminated composite plates, is extended further for geometrically nonlinear analysis in this paper. The proposed element is based on the first-order shear deformation theory (FSDT) and von-Karman's large deflection theory, and the total Lagrangian approach is employed to formulate the element. The deflection and rotation functions of the element boundary are obtained from Timoshenko's laminated composite beam functions. The developed element is simple in formulation, free from shear-locking, and include conventional engineering degrees of freedom. Numerical examples demonstrate that the element is accurate and efficient for large deformation, small rotation geometrically nonlinear analysis of thin to moderately thick laminated composite plates.

Application of radial return mapping algorithm for finite strain elastoplasticity in a hybrid finite element and particle-in-cell model

The radial return mapping algorithm within the computational context of a hybrid Finite Element and Particle-In-Cell (FE/PIC) method is constructed to allow a fluid flow FE/PIC code to be applied solid mechanic problems with large displacements and large deformations. The FE/PIC method retains the robustness of an Eulerian mesh and enables tracking of material deformation by a set of Lagrangian particles or material points. In the FE/PIC approach the particle velocities are interpolated from nodal velocities and then the particle position is updated using a suitable integration scheme, such as the 4th order Runge-Kutta scheme[1]. The strain increments are obtained from gradients of the nodal velocities at the material point positions, which are then used to evaluate the stress increment and update history variables. To obtain the stress increment from the strain increment, the nonlinear constitutive equations are solved in an incremental iterative integration scheme based on a radial return mapping algorithm[2]. A plane stress extension of a rectangular shape J2 elastoplastic material with isotropic, kinematic and combined hardening is performed as an example and for validation of the enhanced FE/PIC method. It is shown that the method is suitable for analysis of problems in crystal plasticity and metal forming. The method is specifically suitable for simulation of neighbouring microstructural phases with different constitutive equations in a multiscale material modelling framework.

An attack-resistant hybrid data-privatization method with low information loss

We examine a recent proposal for data-privatization by testing it against well-known attacks, we show that all of these attacks successfully retrieve a relatively large (and unacceptable) portion of the original data. We then indicate how the data-privatization method examined can be modified to assist it to withstand these attacks and compare the performance of the two approaches. We also show that the new method has better privacy and lower information loss than the former method.

An incremental meta-cognitive-based scaffolding fuzzy neural network

The idea of meta-cognitive learning has enriched the landscape of evolving systems, because it emulates three fundamental aspects of human learning: what-to-learn; how-to-learn; and when-to-learn. However, existing meta-cognitive algorithms still exclude Scaffolding theory, which can realize a plug-and-play classifier. Consequently, these algorithms require laborious pre- and/or post-training processes to be carried out in addition to the main training process. This paper introduces a novel meta-cognitive algorithm termed GENERIC-Classifier (gClass), where the how-to-learn part constitutes a synergy of Scaffolding Theory - a tutoring theory that fosters the ability to sort out complex learning tasks, and Schema Theory - a learning theory of knowledge acquisition by humans. The what-to-learn aspect adopts an online active learning concept by virtue of an extended conflict and ignorance method, making gClass an incremental semi-supervised classifier, whereas the when-to-learn component makes use of the standard sample reserved strategy. A generalized version of the Takagi-Sugeno Kang (TSK) fuzzy system is devised to serve as the cognitive constituent. That is, the rule premise is underpinned by multivariate Gaussian functions, while the rule consequent employs a subset of the non-linear Chebyshev polynomial. Thorough empirical studies, confirmed by their corresponding statistical tests, have numerically validated the efficacy of gClass, which delivers better classification rates than state-of-the-art classifiers while having less complexity.

Polynomial based key predistribution scheme in wireless mesh networks

Wireless mesh networks (WMNs) have the ability to integrate with other networks while providing a fast and cost-saving deployment. The network security is one of important challenge problems in this kind of networks. This paper is focused on key management between mesh and sensor networks. We propose an efficient key pre-distribution scheme based on two polynomials in wireless mesh networks by employing the nature of heterogeneity. Our scheme realizes the property of bloom filters, i.e., neighbor nodes can discover their shared keys but have no knowledge on the different keys possessed by the other node, without the probability of false positive. The analysis presented in this paper shows that our scheme has the ability to establish three different security level keys and achieves the property of self adaptive security for sensor networks with acceptable computation and communication consumption.

Moral rights and substantiality: some questions of integration

Now that Australia has its long awaited legislation protecting the moral rights of authors, a new phase in the development of the rights begins. It must be asked how the incorporation of the rights into the existing copyright legislation, and their subjection to existing doctrines, will affect their operation. And how will existing doctrines be challenged and extended by the existence of the rights? Ultimately these questions will be worked out in the courts. The present article offers a consideration of one area where the legislature has purported to integrate moral rights into the existing scheme but where the practicalities oftheir integration are still unclear. It examines the interplay of moral rights with the doctrine of substantiality, suggesting that any clarification of what substantiality means in the moral rights context will be contingent upon the emergence of more precise definitions of what moral rights are and what interests they are intended to protect.

Late Paleozoic depositional history of the Tarim basin, northwest China: an integration of biostratigraphic and lithostratigraphic constraints

This study provides the first detailed lithostratigraphic and biostratigraphic constraints for improving stratigraphic resolution for hydrocarbon prospecting and exploration in the Tarim basin. A total of 49 stratigraphic units (38 formations and 11 members), ranging in age from the latest Devonian to Permian, are reviewed or redefined in terms of nomenclatures, lithology, age constraints, and lateral distributions based on the detailed field works or newly published data. Of these, the Piqiang Formation (new formation) is proposed to include the reefal carbonates of Asselian-Sakmarian age from the northern Tarim. The subsurface upper Paleozoic stratigraphic framework of the desert areas of the basin is also established for the first time. The high-resolution, basinwide stratigraphic correlations reveal that the sedimentation of the basin in the late Paleozoic was extremely uneven. Of these, the Famennian to Changhsingian successions are completely recorded in the south-western margin areas of the basin. Here, five eustatic sedimentary cycles are well recognizable, suggesting the sedimentation was more eustatically controlled and little affected by local tectonism. The late Paleozoic successions of both Kalpin and Taklimakan regions are commonly interrupted by major hiatuses at various horizons, suggesting that the sedimentation was apparently modified by local tectonism. Of these, the northward movement of the Tarim block and its subsequent collision with the Yili microcontinent (part of the Kazakhstan plate) may be principally accountable for the discrepancy in the sedimentation of the various regions in the basin in the late Paleozoic.

Integration of information literacy training into engineering and technology education

Information literacy has become an important skill for undergraduate students due to societal changes that have seen information become a valuable commodity, the need for graduates to become lifelong learners, and the recognition that information literacy is an underpinning generic skill for effective learning in higher education. This paper describes a sequence of purposefully designed activities to help students learn and practice information literacy skills that were integrated into a first-year engineering and technology study unit as a core element of the unit syllabus. A formal evaluation of these activities was planned and undertaken in semester 1 2003.

Quantitative assessment of through-thickness crack size based on Lamb wave scattering in aluminium plates

The interaction of Lamb wave modes at varying frequencies with a through-thickness crack of different lengths in aluminium plates was analysed in terms of finite element method and experimental study. For oblique-wave incidence, both numerical and experimental results showed that the wave scattering from a crack leads to complicated transmission, reflection and diffraction accompanied by possible wave-mode conversion. A dual-PZT actuation scheme was therefore applied to generate the fundamental symmetrical mode (S0) with enhanced energy to facilitate the identification of crack-scattered wave components. The relationship between crack length and the reflection/transmission coefficient obtained with the aid of the Hilbert transform was established, through which the crack length was quantitatively evaluated. The effects of wavelength of Lamb waves and wave diffraction on the properties of the reflection and transmission coefficients were analysed.

Laminated plate elements based on higher-order shear deformation theories

Efficient and accurate finite elements are crucial for finite element analysis to provide adequate prediction of the structural behavior. A large amount of laminated plate elements have been developed for finite element analysis of laminated composite plates based on the various lamination theories. A recent and complete review of the laminated finite elements based on the higher-order shear deformation theories, including the global higher-order theories, zig-zag theories and the global-local higher-order theories is presented in this paper. Finally some points on the development of the laminated plate elements are summarized.

1948 and 1968 Czech refugee settlers in Australia : a comparison of the settlement and integration processes among two waves of settlers

Nearly eighteen years ago when I first became interested in the history and sociology of Australian immigration, I was particularly attracted by the fact and opportunity to incorporate immigration settlement, experience and accomplishments in my history teaching in secondary school. In particular it was the area of the settlement of Australia that needed a fuller understanding in the teaching of Australian history. By that I mean it was needed to show that there were many other ethnic groups besides the Anglo-Saxon group which had participated in the development of Australia since 1788. Since the end of World War II, the Australian population has doubled, the population structure and characteristics have changed and knowledge about the diverse groups forming the Australian nation is now sought. Sane ethnic groups, mainly the numerically large, have been studied and numerous reports are available. But many of the smaller groups have attracted little interest among Australian scholars. This was one of the reasons that I decided to research the behaviour of one of the smaller groups - the Czechs - to find out about their immigration history to Australia; their immigration processes such as re-settlement and re-establishment; and their community life since World War II. Because of the scarcity of written materials on Czechs in Australia, I had to rely on interviews, personal reminiscenses, letters and documents translated from the Czech language. I should like to express my gratitude to all people and officials of Czech ethnic organisations and clubs in Australia, who agreed to be interviewed and who provided me with documentary material so important for my work. Respecting the wishes of my interviewees their anonymity had to be preserved. In the course of my research, I have received substantial help and the encouragement from the Editor of the now extinct Czech language paper Newspaper Hlas domova, Mr. F.V., whose co-operation is gratefully recognised. I am also grateful to Associate Professor William D. Rubinstein for his help and encouragement in all stages of my work. The introductory part of the study is covered in Chapter One. She reasons for the need to increase Australia's population after World War II and an analysis of the development of settlement in Australia between 1947 and 1984 are discussed. The emigration of Czechs into Australia and their place in the post-war immigration scheme is introduced. To obtain an overview of how Czechs have emigrated around the world, the literature describing their settlement is compared. Also discussed in the literature on Czech settlement in Australia from an historical point of view. The studies on the concept of ethnicity and settlement in Australia are used to document the theoretical issues for an understanding of Australian society. This chapter also contains aspects of sources and research, shewing the processes of documentary research, interviews and related matters. In Chapter Two the history of Czech emigration is discussed, covering the period from the seventeenth to the twentieth century. The first contacts with Australia are highlighted, continuing into the inter-war period and finally the re-settlement of Czechs after World War II. To understand why Czechs left their ancestral country after World War II, the political situation in Czechoslovakia is analysed. The third chapter concentrates mainly in the 1948 wave of settlers, who left Czechoslovakia after the communist take-over in 1948. Their means of departure from their homeland, selection of Australia as a new homeland and their re-settlement and re-establishment are discussed. Their attitudes after their arrival and their later stages of their settlement are analysed. The formation of numerous Czech ethnic organisations which mushroomed between 1950 and 1954 led to an active community life which began to change about five years after their arrival. These charges led to disorganisation of Czech community's life. The causes of these changes which were influential for the failure of the 1948 group to establish a viable community in Australia are analysed. In Chapter Four the wave of 1968 is viewed, their arrival and settling is covered. The study of their group attitudes and formation of group institutions is the main part of this section. A comparison of my data of the two waves, 1948 and 1968, reveals the information that these two groups did not develop the harmonious relationship expected of them as members of the one ethnic group. Chapter Five discusses immigration typologies and concentrates on the differences between legal and illegal emigrants from the Czechoslovak point of view. The integration processes of Czechs and their incorporation into Australian society are discussed. The sixth chapter sums up the findings of this disertation and states the influences which were responsible for the divisions in Czech ethnic life in Australia in the 1980s.

Syzygies of the polynomial invariants of the Riemann tensor

This thesis introduces a novel way of writing polynomial invariants as network graphs, and applies this diagrammatic notation scheme, in conjunction with graph theory, to derive algorithms for constructing relationships (syzygies) between different invariants. These algorithms give rise to a constructive solution of a longstanding classical problem in invariant theory.

Knowledge transfer : a model framework for construction knowledge integration

Managing information and knowledge in the construction industry is an important focus for research. The goal is to expedite better integration of construction knowledge amongst the stakeholders. Better use of this knowledge could allow the building industry to achieve quality outputs making best use of resources – the linked goals of time, cost and quality. Information networks and knowledge transfer are central to this and are recognized as integral to an industry strategy to improve productivity. However, poor delivery of information to those at the construction site and lack of effective methods of transferring knowledge between parties involved in construction become major challenges. Based on a critical review of literature and an interview survey, this paper identifies the information networks adopted in the Malaysian construction industry and models these using four knowledge transfer components classified as ‘control’, ‘innovation’, ‘best practice’ and ‘audit’ element. Knowledge integration practices - attitude, communication, skills, commitment and monitoring; and factors related to information barriers including accessibility, service delivery, information updates and publication, were identified as critical features for the success of knowledge integration in the Malaysian construction industry. A framework for knowledge transfer is proposed to promote better practices in the Malaysian construction industry.

Using the solid-shell element to model the roll forming of large radii profiles

Roll forming is an incremental bending process for forming metal sheet, strip or coiled stock. Although Finite Element Analysis (FEA) is a standard tool for metal forming simulation, it is only now being increasingly used for the analysis of the roll forming process. This is because of the excessive computational time due to the long strip length and the multiple numbers of stands that have to be modelled. Typically a single solid element is used through the thickness of the sheet for roll forming simulations. Recent investigations have shown that residual stresses introduced during steel processing may affect the roll forming process and therefore need to be included in roll forming simulations. These residual stresses vary in intensity through the thickness and this cannot be accounted for by using only one solid element through the material thickness, in this work a solid-shell element with an arbitrary number of integration points has been used to simulate the roll forming process. The system modelled is that of roll forming a V-channel with dual phase DP780 sheet steel. In addition, the influence of other modelling parameters, such as friction, on CPU time is further investigated. The numerical results are compared to experimental data and a good correlation has been observed. Additionally the numerical results show that the CPU time is reduced in the model without friction and that considering friction does not have a significant effect on springback prediction in the numerical analysis of the roll forming process.