Compressive deformation behaviour of a closed-cell aluminum

The mechanical properties of a closed-cell aluminium foam were investigated by compressive tests, and the deformation behaviours of the aluminium foams were studied using Xray microtomography. The results indicate that the deformation of the aluminium foams under compressive loading was localized in narrow continuous deformation bands having widths of order of a cell diameter. The cells in the deformation bands collapsed by a mixed deformation mechanism, which includes mainly bending and minor buckling and yielding. Different fractions of the three deformation modes led to variations in the peak stress and energy absorption for different foam samples with the same density. It was also found that the cell morphology affects the deformation mechanism significantly, whilst the cell size shows little influence.

Effect of cell characteristics on the compressive deformation behavior of a closed-cell aluminium

In this study, the mechanical properties of a closed-cell aluminium foam have been investigated by compressive tests. The deformation behaviors of the aluminium foams were studied using X-ray microtomography (XMT). Aluminium foam samples with various cell size distributions and cell
morphologies were intentionally selected to investigate the effect of the cell characteristics on the deformation behaviors. Results indicated that the deformation of the aluminium foams under compressive loading was localized in narrow continuous deformation bands having widths of order of a cell diameter. The cells in the deformation bands collapsed by a mixed deformation mechanism, which includes mainly bending, and also minor buckling and yielding as well. Different fractions of the three deformation modes led to variations in the peak stress and energy absorption for different foam samples with the same density. It was also found that the cell morphology affected the deformation mechanism significantly, whilst the cell size showed little influence. Those cells with defects such as corrugations, curvatures and non-uniformities in the wall thickness were the initiators of the deformation bands of the aluminium foam.

3-dimensional characterization of membrane with nanoporous structure using TEM tomography and image analysis

The nanoporous structure of membrane varies in 3-dimensional (3-D) space and has remarkable influences on the filtration or desalination achieved, fouling potentials and therefore, the quality of yielded water. Knowledge of the 3-D nanoporous structure is thus vital to understanding and predicting its performance. A novel method by incorporating transmission electronic microtomography, image processing and 3-D reconstruction is introduced to characterize membranes with nano structures. The reconstruction algorithm allows for the visualization of 3-D nanoporous structure in a non-destructive way from any directions. This novel technique Ieads to in-depth understanding and accurate prediction of filtration performance.

3-dimensional characterization of membrane with nanoporous structure using TEM tomography and image analysis

The nanoporous structure of a membrane varies in a 3-dimensional (3-D) space and has remarkable influences on the filtration or desalination achieved, fouling potentials and therefore, the quality of yielded water. Knowledge of the 3-D nanoporous structure is thus vital to understanding and predicting its performance. A novel method by incorporating transmission electronic microtomography, image processing and 3-D reconstruction is introduced to characterize membranes with nano structures. The reconstruction algorithm allows for the visualization of 3-D nanoporous structure in a non-destructive way from any directions. This novel technique leads to in-depth understanding and accurate prediction of filtration performance.

Crack damage in polymers and composites: a review

Polymer-based materials are extensively used in various applications such as aircrafts, civilian structures, oil and gas platforms and electronics. They are, however, inherently damage prone and over time, the formation of cracks and microscopic damages influences the thermo-mechanical and electrical properties, which eventually results in the total failure of the materials. This paper provides an overview of the principal causes of cracking in polymer and composites and summarizes the recent progress in the development of non-destructive techniques in crack detection. Furthermore, recent progress in the development of bio-inspired self-healing methods in autonomic repair is discussed.