MRP-production planning in agile manufacturing

The research studied a production planning problem in a manufacturing firm. Some production planning software was developed that enabled the efficient and rapid reproduction of an optimum production forecast. Not only was the production cost reduced but a significant length of planning time cn be saved using the software.

Decision support tool for production planning of a machining line

A decision support tool for production planning was developed to perform the difficult and time consuming task of allocating resources within the industrial partner's machining line, consisting of identical Computerized Numerically Controlled machines. The production-planning tool identified significant labour savings in a number of the industrial partner's production plans.

An architecture of internet based data processing based on multicast and anycast protocols

Most of the current web-based application systems suffer from poor performance and costly heterogeneous accessing. Distributed or replicated strategies can alleviate the problem in some degree, but there are still some problems of the distributed or replicated model, such as data synchronization, load balance, and so on.  In this paper, we propose a novel architecture for Internet-based data processing system based on multicast and anycast protocols. The proposed architecture breaks the functionalities of existing data processing system, in particular, the database functionality, into several agents. These agents communicate with each other using multicast and anycast mechanisms. We show that the proposed architecture provides better scalability, robustness, automatic load balance, and performance than the current distributed architecture of Internet-based data
processing.

A conceptual matrix model for biological data processing

This paper proposes a conceptual matrix model with algorithms for biological data processing. The required elements for constructing a matrix model are discussed. The representative matrix-based methods and algorithms which have potentials in biological data processing are presented / proposed. Some application cases of the model in biological data processing are studied, which show the applicability of this model in various kinds of biological data processing. This conceptual model established a framework within which biological data processing and mining could be conducted. The model is also heuristic to other applications.

Modeling data processing activity to assess the internal control function

This thesis describes research that was conducted into the potential of modeling the activities of the Data Processing Department as an aid to the computer auditor. A methodology is composed to aid in the evaluation of the Internal Controls, particularly the General Controls relative to computer processing. Consisting of three major components, the methodology enables the auditor to model the presumed activities of the Data Processing Department against the actual activities, as recorded on the Operating System Log. The first component of the methodology is the construction and loading of a model of the presumed activities of the Data Processing Department from its verbal, scheduled, and reported activities. The second component is the generation of a description of the actual activities of the Data Processing Department from the information recorded on the Operating System Log. This is effected by reducing the Operating System Log to the format described by the Standard Audit File concept. Finally, the third component in the methodology is the modeling process itself. This is in fact a new analysis technique proposed for use by the EDP auditor. The modeling process is composed of software that compares the model developed and loaded in the first component, with the description of actual activity as collated by the second component. Results from this comparison are then reviewed by the auditor, who determines if they adequately depict the situation, or whether the models description as specified in the first component requires to be altered, and the modeling process re-initiated. In conducting the research, information and data from a production installation was used. Use of the ‘real-world’ input proved both the feasibility of developing a model of the reported activities of the Data Processing Department, and the adequacy of the operating system log as a source of information to report the departments actual activities. Additionally, it enabled the involvement and comment of practicing auditors. The research involved analysis of the effect of EDP on the audit process, structure of the EDP audit process, data reduction, data structures, model formalization, and model processing software. Additionally, the Standard Audit File concept was verified through its use by practising auditors, and expanded by the development of an indexed data structure, which enabled its analysis to be conducted interactively. Results from the trial implementation of the research software and methodology at a production installation confirmed the research hypothesis that the activities of the Data Processing Department could be modelled, and that there are substantial benefits from the EDP auditor in analysing this process. The research in fact provides a new source of information, and develops a new analysis technique for the EDP auditor. It demonstrates the utilization of computer technology to monitor itself for the audit function, and reasserts auditor independence by providing access to technical detail describing the processing activities of the computer.

Performance evaluation of open source seismic data processing packages

In many businesses, including hydrocarbon industries, reducing cost is of high priority. Although hydrocarbon industries appear able to afford the expensive computing infrastructure and software packages used to process seismic data in the search for hydrocarbon traps, it is always imperative to find ways to minimize cost. Seismic processing costs can be significantly reduced by using inexpensive, open source seismic data processing packages. However, hydrocarbon industries question the processing performance capability of open source packages, claiming that their seismic functions are less integrated and provide almost no technical guarantees for one to use. The objective of this paper is to demonstrate, through a comparative analysis, that open source seismic data processing packages are capable of executing the required seismic functions on an actual industrial workload. To achieve this objective we investigate whether or not open source seismic data processing packages can be executed using the same set of seismic data through data format conversions, and whether or not they can achieve reasonable performance and speedup when executing parallel seismic functions on a HPC cluster. Among the few open source packages available on the Internet, the subjects of our study are two popular packages: Seismic UNIX (SU) and Madagascar.

Recommendations for improved data processing from expired gas analysis indirect calorimetry

There is currently no universally recommended and accepted method of data processing within the science of indirect calorimetry for either mixing chamber or breath-by-breath systems of expired gas analysis. Exercise physiologists were first surveyed to determine methods used to process oxygen consumption ([OV0312]O 2) data, and current attitudes to data processing within the science of indirect calorimetry. Breath-by-breath datasets obtained from indirect calorimetry during incremental exercise were then used to demonstrate the consequences of commonly used time, breath and digital filter post-acquisition data processing strategies. Assessment of the variability in breath-by-breath data was determined using multiple regression based on the independent variables ventilation (VE), and the expired gas fractions for oxygen and carbon dioxide, FEO 2 and FECO2, respectively. Based on the results of explanation of variance of the breath-by-breath [OV0312]O2 data, methods of processing to remove variability were proposed for time-averaged, breath-averaged and digital filter applications. Among exercise physiologists, the strategy used to remove the variability in sequential [OV0312]O2 measurements varied widely, and consisted of time averages (30 sec [38%], 60 sec [18%], 20 sec [11%], 15 sec [8%]), a moving average of five to 11 breaths (10%), and the middle five of seven breaths (7%). Most respondents indicated that they used multiple criteria to establish maximum [OV0312]O 2 ([OV0312]O2max) including: the attainment of age-predicted maximum heart rate (HRmax) [53%], respiratory exchange ratio (RER) >1.10 (49%) or RER >1.15 (27%) and a rating of perceived exertion (RPE) of >17, 18 or 19 (20%). The reasons stated for these strategies included their own beliefs (32%), what they were taught (26%), what they read in research articles (22%), tradition (13%) and the influence of their colleagues (7%). The combination of VE, FEO 2 and FECO2 removed 96-98% of [OV0312]O2 breath-by-breath variability in incremental and steady-state exercise [OV0312]O2 data sets, respectively. Correction of residual error in [OV0312]O2 datasets to 10% of the raw variability results from application of a 30-second time average, 15-breath running average, or a 0.04 Hz low cut-off digital filter. Thus, we recommend that once these data processing strategies are used, the peak or maximal value becomes the highest processed datapoint. Exercise physiologists need to agree on, and continually refine through empirical research, a consistent process for analysing data from indirect calorimetry.

Removing the ambiguity of data processing methods: Optimizing the location of peak boundaries for accurate moment calculations

The calculation of the first few moments of elution peaks is necessary to determine: the amount of component in the sample (peak area or zeroth moment), the retention factor (first moment), and the column efficiency (second moment). It is a time consuming and tedious task for the analyst to perform these calculations, thus data analysis is generally completed by data stations associated to modern chromatographs. However, data acquisition software is a black box which provides no information to chromatographers on how their data are treated. These results are too important to be accepted on blind faith. The location of the peak integration boundaries is most important. In this manuscript, we explore the relationships between the size of the integration area, the relative position of the peak maximum within this area, and the accuracy of the calculated moments. We found that relationships between these parameters do exist and that computers can be programmed with relatively simple routines to automatize the extraction of key peak parameters and to select acceptable integration boundaries. It was also found that the most accurate results are obtained when the S/N exceeds 200.

Recommendation techniques based on off-line data processing: a multifaceted survey

Recommendations based on off-line data processing has attracted increasing attention from both research communities and IT industries. The recommendation techniques could be used to explore huge volumes of data, identify the items that users probably like, and translate the research results into real-world applications, etc. This paper surveys the recent progress in the research of recommendations based on off-line data processing, with emphasis on new techniques (such as context-based recommendation, temporal recommendation), and new features (such as serendipitous recommendation). Finally, we outline some existing challenges for future research.

A survey of recommendation techniques based on offline data processing

Recommendations based on offline data processing has attracted increasing attention from both research communities and IT industries. The recommendation techniques could be used to explore huge volumes of data, identify the items that users probably like, translate the research results into real-world applications and so on. This paper surveys the recent progress in the research of recommendations based on offline data processing, with emphasis on new techniques (such as temporal recommendation, graph-based recommendation and trust-based recommendation), new features (such as serendipitous recommendation) and new research issues (such as tag recommendation and group recommendation). We also provide an extensive review of evaluation measurements, benchmark data sets and available open source tools. Finally, we outline some existing challenges for future research.