Self-assembly of gold nanowires along carbon nanotubes for ultrahigh-aspect-ratio hybrids

We report a novel approach for the assembly of one-dimensional hybrid nanostructures that consist of gold nanowires with ultrahigh aspect ratios (L/d > 500) self-assembled along the axes of multiwalled carbon nanotubes. The micrometer-long hybrid nanowires exhibit high electrical conductivity and can be easily microcontact-printed onto various substrates in a patterned form, suggesting that these hybrids have considerable potential as interconnects for nanoelectronic applications.

Understanding wettability changes from practical plasma functionalization of carbon nanotubes

Combining continuous wave and pulsed plasma modes enables strong interfacial bonding of high levels of desired surface functional groups. The method has been applied to a thin film of multiwalled carbon nanotubes, a nanostructured and relatively inert material, using N₂ + H₂ plasma. A high density of primary amine groups (~2.6%) was achieved without damaging the tube surface. Contact angle measurements, using different probe liquids, plus model calculations of surface energy agree well with the spectroscopy and electron microscope results, i.e., the polar part shows significant changes while the non-polar part was unchanged. These results indicate that the wettability changes in the thin film of carbon nanotubes by the plasma treatment are due to the changes in surface chemistry. This confirms the effectiveness and practicality of the improved plasma method that should greatly help the use of nanotubes in applications from biomaterials to nanocomposites.

Individual dispersion of carbon nanotubes in epoxy via a novel dispersion-curing approach using ionic liquids

The effective dispersion of carbon nanotubes (CNTs) in a thermoset was achieved using ionic liquid as the dispersion-curing agent. We preferentially dispersed multiwalled carbon nanotubes (MWCNTs) down to individual tube levels in epoxy resin. Here the dispersion is ruled by the depletion of physical bundles within the MWCNT networks, for which molecular ordering of ionic liquids is considered responsible. The quantitative analyses using ultra small angle X-ray scattering (USAXS) confirmed the dispersion of individual MWCNTs in the matrix. The distance between the dispersed nanotubes was calculated at different nanotube loadings using the power law fitting of the USAXS data. The fine dispersion and subsequent curing, both controlled by ionic liquid, lead to composites with substantially enhanced fracture mechanical and thermomechanical properties with no reduction in thermal properties. Merging processing techniques of nanocomposites with ionic liquid for efficient dispersion of nanotubes and preferential curing of thermosets facilitates the development of new, high performance materials.

Electrical conductivity of single walled and multiwalled carbon nanotube containing wool fibers

The main purpose of this study was producing conductive wool fabric applying carbon nanotubes. Raw and oxidized wool samples were treated with carbon nanotubes in the impregnating bath in the presence of citric acid as a crosslinking agent and sodium hypophosphite as a catalyst while sonicating them in the ultrasonic bath. Electrical resistance, washing durability, and color variation of treated samples were assessed. Through SEM images, the surface morphology of treated samples was studied confirming the surface coating through carbon nanotubes. According to the results, the electrical resistance of treated wool with carbon nanotubes reduced substantially. However, the single-walled carbon nanotubes are more useful to increase the conductivity. In addition, the wool color changed into gray after the treatment.

Chemistry of carbon nanotubes

Judicious application of site-selective reactions to non-aligned and aligned carbon nanotubes has opened a rich field of carbon nanotube chemistry. In order to meet specific requirements demanded by particular applications (e.g. biocompatibility for nanotube biosensors and interfacial strength for blending with polymers), chemical modification of carbon nanotubes is essential. The tips of carbon nanotubes are more reactive than their sidewalls, allowing a variety of chemical reagents to be attached at the nanotube tips. Recently, some interesting reactions have also been devised for chemical modification of both the inner and outer nanotube walls, though the seamless arrangement of hexagon rings renders the sidewalls relatively unreactive. This review provides a brief summary of very recent progress in the research on chemistry of carbon nanotubes.

Focused ion beam milling as a universal template technique for patterned growth of carbon nanotubes

Focused ion beam (FIB) milling system has been used to create nanosized patterns as the template for patterned growth of carbon nanotubes on Si substrate surface without predeposition of metal catalysts. Carbon nanotubes only nucleate and grow on the template under controlled pyrolysis of iron phthalocyanine at 1000 °C. The size, growth direction, and density of the patterned nanotubes can be controlled under different growth conditions and template sizes. Atomic force microscopy and electron microscopy analyses reveal that the selective growth on the FIB template is due to its special surface morphology and crystalline structure.

Patterned growth of carbon nanotubes on Si substrates without predeposition of metal catalysts

Aligned carbon nanotubes (CNTs) can be readily synthesized on quartz or silicon-oxide-coated Si substrates using a chemical vapor deposition method, but it is difficult to grow them on pure Si substrates without predeposition of metal catalysts. We report that aligned CNTs were grown by pyrolysis of iron phthalocyanine at 1000 °C on the templates created on Si substrates with simple mechanical scratching. Scanning electron microscopy and x-ray energy spectroscopy analysis revealed that the trenches and patterns created on the surface of Si substrates were preferred nucleation sites for nanotube growth due to a high surface energy, metastable surface structure, and possible capillarity effect. A two-step pyrolysis process maintained Fe as an active catalyst.

Nucleation and growth of carbon nanotubes in a mechano-thermal process

Separate nucleation and growth processes of carbon nanotubes were found in a mechano-thermal method in which carbon nanotubes are produced by first mechanical milling of graphite powder at room temperature and subsequent thermal annealing up to 1400 °C. The ball-milled graphite contains nucleation structures (nanosized metal particles and deformed (0 0 2) layers containing pentagons), and disordered carbon as a free carbon atom source. The subsequent annealing activates the growth of two types of multi-walled nanotubes in the absence of carbon vapor. Thin nanotubes (diameter <20 nm) are formed via crystallization of the disordered carbon with the preferred formation of the (0 0 2) basal planes. Thick nanotubes (diameter >20 nm) are formed through a metal catalytic solution–precipitation process (solid–liquid–solid). In both cases, carbon nanotubes grew out from disordered carbon particles with closed tips.

Carbon nanotubes formed in graphite after mechanical grinding and thermal annealing

Multi-walled carbon nanotubes with cylindrical and bamboo-type structures are produced in a graphite sample after mechanical milling at ambient temperature and subsequent thermal annealing up to 1400 °C. The ball milling produces a precursor structure and the thermal annealing activates the nanotube growth. Different nanotubular structures indicate different formation mechanisms: multi-wall cylindrical carbon nanotubes are probably formed upon micropores and the bamboo tubes are produced because of the metal catalysts. A two-dimensional growth governed by surface diffusion is believed to be one important factor for the nanotube growth. A potential industrial production method is demonstrated with advantages of large production quantity and low cost.

Demonstration of the advantages of using bamboo-like nanotubes for electrochemical biosensor applications compared with single walled carbon nanotubes

The modification of glassy carbon electrodes with random dispersions of nanotubes is currently the most popular approach to the preparation of carbon nanotube modified electrodes. The performance of glassy carbon electrodes modified with a random dispersion of bamboo type carbon nanotubes was compared with single walled carbon nanotubes modified glassy carbon electrodes and bare glassy carbon electrodes. The electrochemical performance of all three types for electrode were compared by investigating the electrochemistry with solution species and the oxidation of guanine and adenine bases of surface adsorbed DNA. The presence of edge planes of graphene at regular intervals along the walls of the bamboo nanotubes resulted in superior electrochemical performance relative to SWNT modified electrodes from two aspects. Firstly, with solution species the peak separation of the oxidation and reduction waves were smaller indicating more rapid rates of electron transfer. Secondly, a greater number of electroactive sites along the walls of the bamboo-carbon nanotubes (BCNTs) resulted in larger current signals and a broader dynamic range for the oxidation of DNA bases.

Transmission electron microscopy investigation of substitution reactions from carbon nanotube template to silicon carbide nanowires

Substitution reactions between multiwalled carbon nanotubes and silicon monoxide vapour have been investigated using transmission electron microscopy. Different reactions occurred inside the multiwalled nanotubes and on the nanotube external surfaces, resulting in the formation of silicon carbide nanowires with a core–shell structure. The substitution reaction process and end products are strongly affected by nanotube structures and a ball milling treatment of the starting materials.