Development and application of a microelectrode based scanning voltammetric detector

A large part of the work presented in this thesis describes the development and use of a novel electrochemical detector designed to allow the electrochemical characterisation of compounds in flowing solution by means of cyclic voltammetry. The detector was microprocessor controlled, which provides digital generation of the potential waveform and collection of data for subsequent analysis. Microdisk working electrodes are employed to permit both thermodynamic and kinetically controlled processes to be studied under steady-state conditions in flowing solutions without the distortion or hysteresis normally encountered with larger sized electrodes. The effect of electrode size, potential scan rate, and solution flow rate are studied extensively with the oxidation of ferrocene used as an example of a thermodynamically controlled process and a series of catecholamines as examples of a kinetically controlled process. The performance of the detector was best demonstrated when used as a HPLC post-column detector. The 3-dimensional chromatovoltammograms obtained allow on-line characterisation of each fraction as it elutes from the column. The rest of the work presented in this thesis involves the study of the oxidative degradation pathway of dithranol. The oxidative pathway was shown to involve a complex free radical mechanism, dependent on the presence of both oxygen and, in particular light. The pathway is further complicated by the fact that dithranol may exist in either a keto or enol form, the enol being most susceptible to oxidation. A likely mechanism is proposed from studies performed with cyclic voltammetry and controlled potential electrolysis, then defined by subsequent kinetic studies.

Neurophysiology of insects using microelectrode arrays: Current trends and future prospects

Simple to complex behaviors are directed by the brain, which possess nervous cells, called neurons. Mammals have billions of neurons, organized in networks, making their study difficult. Although methods have well evolved since the last century, studying a simpler model is the key to resolving neuronal communication. In this review, we demonstrate that insects are an excellent model and tool to understand neural mechanisms. Moreover, new technology, such as Microelectrodes Arrays (MEAs), is an innovative method which opens the possibility to study neuron clusters, rather than individual cells. A combined method of an insect model and MEAs technology may lead to great discoveries in neurophysiology, advancing progress in pharmacology, infectious and neurodegenerative diseases, agriculture maintenance and robotics.

Dielectrophoretically patterned carbon nanotubes to sort microparticles

This article compares the operation of a dielectrophoretic (DEP) platform before and after pattering carbon nanotubes (CNTs) between its microelectrodes. The diverse performance of the DEP system is assessed by separating 1 and 5 μm polystyrene particles. In the absence of CNTs, both particles can only be trapped by operating the system at low medium conductivities, (<10^-3 S/m) and frequencies (<75 kHz). Alternatively, applying CNTs to the system, some CNTs coat the surface of particles and increase their overall conductivity and permittivity, whereas the rest of them are patterned between the microelectrodes and induce strong DEP forces at their free ends, which can effectively trap the coated particles. The first development extends the range of medium conductivities and frequencies at which the trapping of both particles is achievable, whereas the second development facilitates the selective deposition of particles along the surface of curved microelectrodes. Setting the medium conductivity to 2×10^-3 S/m and the frequency to 20 MHz, most of 5 μm particles are trapped at the entry region of the first microelectrode pair, whereas most of 1 μm particles are trapped at the tips, and this distinction facilitates their separation. The trapping of 1 μm particles can be improved by decreasing the frequency to 1.5 MHz. This study demonstrates how the integration of CNTs into microfluidic systems enables them to operate beyond their capabilities.

Electrochemistry of room temperature protic ionic liquids

Eighteen protic ionic liquids containing different combinations of cations and anions, hydrophobicity, viscosity, and conductivity have been synthesized and their physicochemical properties determined. In one series, the diethanolammonium cations were combined with acetate, formate, hydrogen sulfate, chloride, sulfamate, and mesylate anions. In the second series, acetate and formate anions were combined with amine bases, triethylamine, diethylamine, triethanolamine, di-n-propylamine, and di-n-butylamine. The electrochemical characteristics of the eight protic ionic liquids that are liquid at room temperature (RTPILs) have been determined using cyclic, microelectrode, and rotating disk electrode voltammetries. Potential windows of the RTPILs have been compared at glassy carbon, platinum, gold, and boron-doped diamond electrodes and generally found to be the largest in the case of glassy carbon. The voltammetry of IUPAC recommended potential scale reference systems, ferrocene/ferrocenium and cobaltocenium/cobaltocene, have been evaluated and found to be ideal in the case of the less viscous RTPILs but involve adsorption in the highly viscous ones. Other properties such as diffusion coefficients, ionic conductivity, and double layer capacitance also have been measured. The influence of water on the potential windows, viscosity, and diffusion has been studied systematically by deliberate addition of water to the dried ionic liquids. The survey highlights the problems with voltammetric studies in highly viscous room temperature protic ionic liquids and also suggests the way forward with respect to their possible industrial use.

Trapping and imaging of embryonic organisms using dielectrophoresis

Development of dielectrophoretic (DEP) arrays for real-time imaging of embryonic organisms is described. Microelectrode arrays were used for trapping both embryonated eggs and larval stages of Antarctic nematode Panagrolaimus davidi. Ellipsoid single-shell model was also applied to study the interactions between DEP fields and developing multicellular organisms. This work provides proof-of-concept application of chip-based technologies for the analysis of individual embryos trapped under DEP force.

Dynamic analysis of drug-induced cytotoxicity using chip-based dielectrophoretic cell immobilization technology

Quantification of programmed and accidental cell death provides useful end-points for the anticancer drug efficacy assessment. Cell death is, however, a stochastic process. Therefore, the opportunity to dynamically quantify individual cellular states is advantageous over the commonly employed static, end-point assays. In this work, we describe the development and application of a microfabricated, dielectrophoretic (DEP) cell immobilization platform for the realtime analysis of cancer drug-induced cytotoxicity. Microelectrode arrays were designed to generate weak electro-thermal vortices that support efficient drug mixing and rapid cell immobilization at the delta-shape regions of strong electric field formed between the opposite microelectrodes. We applied this technology to the dynamic analysis of hematopoietic tumor cells that represent a particular challenge for real-time imaging due to their dislodgement during image acquisition. The present study was designed to provide a comprehensive mechanistic rationale for accelerated cell-based assays on DEP chips using real-time labeling with cell permeability markers. In this context, we provide data on the complex behavior of viable vs dying cells in the DEP fields and probe the effects of DEP fields upon cell responses to anticancer drugs and overall bioassay performance. Results indicate that simple DEP cell immobilization technology can be readily applied for the dynamic analysis of investigational drugs in hematopoietic cancer cells. This ability is of particular importance in studying the outcome of patient derived cancer cells, when exposed to therapeutic drugs, as these cells are often rare and difficult to collect, purify and immobilize.

Interfacing cell-based assays in environmental scanning electron microscopy using dielectrophoresis

Development of the dielectrophoretic (DEP) live cell trapping technology and its interfacing with the environmental scanning electron microscopy (ESEM) is described. DEP microelectrode arrays were fabricated on glass substrate using photolithography and lift-off. Chip-based arrays were applied for ESEM analysis of DEP-trapped human leukemic cells. This work provides proof-of-concept interfacing of the DEP cell retention and trapping technology with ESEM to provide a high-resolution analysis of individual nonadherent cells.

Dielectrophoresis-raman spectroscopy system for analysing suspended WO3 nanoparticles

Dielectrophoresis (DEP) utilizing a curved microelectrode pattern was developed and integrated with a Raman spectroscopy system. The electrodes were patterned on a Raman transparent quartz substrate, and integrated with a microfluidic channel in poly-dimethylsiloxane (PDMS). This integrated system can be efficiently used for the determination of suspended particles type and the direct mapping of their spatial concentrations. It will be demonstrated that the integration of Raman mapping with dielectrophoretically controlled WO3 particles can be used for studying suspended particles in situ.

Tuneable optical waveguide based on dielectrophoresis and microfluidics

In this work, an array of dielectrophoretic curved microelectrodes patterned in a microfluidic channel and integrated with a multimode rib polymeric waveguide is demonstrated. The microfluidic channel is infiltrated with suspended silica (SiO2) and tungsten trioxide (WO3) nanoparticles. The optofluidic system is found to be sensitive and responds not only to the infiltration of nanoparticle suspensions in the microfluidic channel, but also to the magnitude and frequencies of dielectrophoretic forces applied on the nanoparticles. The nanoparticles can be uniformly concentrated or repelled from the region between the curved microelectrode tips forming either a dense stream of flowing nanoparticles or a region void of nanoparticles in the evanescent sensitive region of the polymeric waveguide. The concentration and repulsion of nanoparticles from this region creates a refractive index gradient in the upper cladding of the polymeric waveguide. These conditions made it possible for light to either remain guided or be scattered as a function of dielectrophoretic settings applied on the nanoparticles. The results demonstrate that we successfully developed a novel tuneable polymeric waveguide based on dielectrophoretic assembly of nanoparticles suspended in fluids.

Trapping and imaging of micron-sized embryos using dielectrophoresis

Development of dielectrophoretic (DEP) arrays for real-time imaging of embryonic organisms is described. Microelectrode arrays were used for trapping both embryonated eggs and larval stages of Antarctic nematode Panagrolaimus davidi. Ellipsoid single-shell model was also applied to study the interactions between DEP fields and developing multicellular organisms. This work provides proof-of-concept application of chip-based technologies for the analysis of individual embryos trapped under DEP force.

Comonitoring of adenosine and dopamine using the wireless instantaneous neurotransmitter concentration system : proof of principle : laboratory investigation

Object

The authors of previous studies have demonstrated that local adenosine efflux may contribute to the therapeutic mechanism of action of thalamic deep brain stimulation (DBS) for essential tremor. Real-time monitoring of the neurochemical output of DBS-targeted regions may thus advance functional neurosurgical procedures by identifying candidate neurotransmitters and neuromodulators involved in the physiological effects of DBS. This would in turn permit the development of a method of chemically guided placement of DBS electrodes in vivo. Designed in compliance with FDA-recognized standards for medical electrical device safety, the authors report on the utility of the Wireless Instantaneous Neurotransmitter Concentration System (WINCS) for real-time comonitoring of electrical stimulation–evoked adenosine and dopamine efflux in vivo, utilizing fast-scan cyclic voltammetry (FSCV) at a polyacrylonitrile-based (T-650) carbon fiber microelectrode (CFM).
Methods

The WINCS was used for FSCV, which consisted of a triangle wave scanned between −0.4 and +1.5 V at a rate of 400 V/second and applied at 10 Hz. All voltages applied to the CFM were with respect to an Ag/AgCl reference electrode. The CFM was constructed by aspirating a single T-650 carbon fiber (r = 2.5 μm) into a glass capillary and pulling to a microscopic tip using a pipette puller. The exposed carbon fiber (the sensing region) extended beyond the glass insulation by ~ 50 μm. Proof of principle tests included in vitro measurements of adenosine and dopamine, as well as in vivo measurements in urethane-anesthetized rats by monitoring adenosine and dopamine efflux in the dorsomedial caudate putamen evoked by high-frequency electrical stimulation of the ventral tegmental area and substantia nigra.
Results

The WINCS provided reliable, high-fidelity measurements of adenosine efflux. Peak oxidative currents appeared at +1.5 V and at +1.0 V for adenosine, separate from the peak oxidative current at +0.6 V for dopamine. The WINCS detected subsecond adenosine and dopamine efflux in the caudate putamen at an implanted CFM during high-frequency stimulation of the ventral tegmental area and substantia nigra. Both in vitro and in vivo testing demonstrated that WINCS can detect adenosine in the presence of other easily oxidizable neurochemicals such as dopamine comparable to the detection abilities of a conventional hardwired electrochemical system for FSCV.
Conclusions

Altogether, these results demonstrate that WINCS is well suited for wireless monitoring of high-frequency stimulation-evoked changes in brain extracellular concentrations of adenosine. Clinical applications of selective adenosine measurements may prove important to the future development of DBS technology.

Wireless instantaneous neurotransmitter concentration system-based amperometric detection of dopamine, adenosine, and glutamate for intraoperative neurochemical monitoring - laboratory investigation

Object  In a companion study, the authors describe the development of a new instrument named the Wireless Instantaneous Neurotransmitter Concentration System (WINCS), which couples digital telemetry with fast-scan cyclic voltammetry (FSCV) to measure extracellular concentrations of dopamine. In the present study, the authors describe the extended capability of the WINCS to use fixed potential amperometry (FPA) to measure extracellular concentrations of dopamine, as well as glutamate and adenosine. Compared with other electrochemical techniques such as FSCV or high-speed chronoamperometry, FPA offers superior temporal resolution and, in combination with enzyme-linked biosensors, the potential to monitor nonelectroactive analytes in real time.

Methods  The WINCS design incorporated a transimpedance amplifier with associated analog circuitry for FPA; a microprocessor; a Bluetooth transceiver; and a single, battery-powered, multilayer, printed circuit board. The WINCS was tested with 3 distinct recording electrodes: 1) a carbon-fiber microelectrode (CFM) to measure dopamine; 2) a glutamate oxidase enzyme–linked electrode to measure glutamate; and 3) a multiple enzyme–linked electrode (adenosine deaminase, nucleoside phosphorylase, and xanthine oxidase) to measure adenosine. Proof-of-principle analyses included noise assessments and in vitro and in vivo measurements that were compared with similar analyses by using a commercial hardwired electrochemical system (EA161 Picostat, eDAQ; Pty Ltd). In urethane-anesthetized rats, dopamine release was monitored in the striatum following deep brain stimulation (DBS) of ascending dopaminergic fibers in the medial forebrain bundle (MFB). In separate rat experiments, DBS-evoked adenosine release was monitored in the ventrolateral thalamus. To test the WINCS in an operating room setting resembling human neurosurgery, cortical glutamate release in response to motor cortex stimulation (MCS) was monitored using a large-mammal animal model, the pig.

Results   The WINCS, which is designed in compliance with FDA-recognized consensus standards for medical electrical device safety, successfully measured dopamine, glutamate, and adenosine, both in vitro and in vivo. The WINCS detected striatal dopamine release at the implanted CFM during DBS of the MFB. The DBS-evoked adenosine release in the rat thalamus and MCS-evoked glutamate release in the pig cortex were also successfully measured. Overall, in vitro and in vivo testing demonstrated signals comparable to a commercial hardwired electrochemical system for FPA.

Conclusions  By incorporating FPA, the chemical repertoire of WINCS-measurable neurotransmitters is expanded to include glutamate and other nonelectroactive species for which the evolving field of enzyme-linked biosensors exists. Because many neurotransmitters are not electrochemically active, FPA in combination with enzyme-linked microelectrodes represents a powerful intraoperative tool for rapid and selective neurochemical sampling in important anatomical targets during functional neurosurgery.

Classification of neural action potentials using mean shift clustering

 Understanding neural functions requires the observation of the activities of single neurons that are represented via electrophysiological data. Processing and understanding these data are challenging problems in biomedical engineering. A microelectrode commonly records the activity of multiple neurons. Spike sorting is a process of classifying every single action potential (spike) to a particular neuron. This paper proposes a combination between diffusion maps (DM) and mean shift clustering method for spike sorting. DM is utilized to extract spike features, which are highly capable of discriminating different spike shapes. Mean shift clustering provides an automatic unsupervised clustering, which takes extracted features from DM as inputs. Experimental results show a noticeable dominance of the features extracted by DM compared to those selected by wavelet transformation (WT). Accordingly, the proposed integrated method is significantly superior to the popular existing combination of WT and superparamagnetic clustering regarding spike sorting accuracy.

Cyclopalladated complexes containing 2-C 6 R 4 PPh 2 ligands (R = H, F): one-electron electrochemical reduction leading to metal–carbon σ-bond cleavage via palladium( i )

Three new ortho -metallated palladium complexes, [Pd(O,O’-hfacac)(κ2-2-C6F4PPh2)] (11), [Pd2(O,O’hfacac)2(μ-2-C6F4PPh2)2](12) and [Pd(O,O’-hfacac)(κC-2-C6F4PPh2)(PPh3)] (13) (hfacac = hexafluoroace-tylacetonate), have been prepared and fully characterised. The electrochemical reductions of complexes 11–13, together with those of other cyclopalladated complexes containing 2C6R4PPh2 ligands (R = H, F) were studied by cyclic, rotating disk and microelectrode voltammetry. Evidence for the one-electron reduction of [PdI(κ2-2-C6F4PPh2)(PPh2Fc)] (6) was obtained from coulometric analysis, although the product is unstable and undergoes further chemical processes. Preparative electro-reduction of [Pd2(μ-Br)2(κ2-2-C6F4PPh2)2] (7) in CH2Cl2 causes reductive cleavage of its Pd–C σ-bonds and formation of the complex [PdBr2{PPh2(2-C6F4H)}2](14); possible mechanisms are discussed.

Conditions favoring the formation of monomeric Pt(III) derivatives in the electrochemical oxidation of trans-[Pt(II){(p-BrC6F4)NCH2CH2NEt2}Cl(py)]

Characterization of the anticancer active compound trans-[Pt^II{(p-BrC6F4)NCH2CH2NEt2}Cl(py)] is described along with identification of electrochemical conditions that favor formation of a monomeric one-electron-oxidized Pt^III derivative. The square-planar organoamidoplatinum(II) compound was synthesized through a carbon dioxide elimination reaction. Structural characterization by using single-crystal X-Ray diffraction reveals a trans configuration with respect to donor atoms of like charges. As Pt^III intermediates have been implicated in the reactions of platinum anticancer agents, electrochemical conditions favoring the formation of one-electron-oxidized species were sought. Transient cyclic voltammetry at fast scan rates or steady-state rotating disc and microelectrode techniques in a range of molecular solvents and an ionic liquid confirm the existence of a well-defined, chemically and electrochemically reversible one-electron oxidation process that, under suitable conditions, generates a Pt^III complex, which is proposed to be monomeric [Pt^III{(p-BrC6F4)NCH2CH2NEt2}Cl(py)]⁺. Electron paramagnetic resonance spectra obtained from highly non-coordinating dichloromethane/([Bu4N][B(C6F5)4]) solutions, frozen to liquid nitrogen temperature immediately after bulk electrolysis in a glove box, support the Pt^III assignment rather than formation of a Pt^II cation radical. However, the voltammetric behavior is highly dependent on the timescale of the experiments, temperature, concentration of trans-[Pt^II{(p-BrC6F4)NCH2CH2NEt2}- Cl(py)], and the solvent/electrolyte. In the low-polarity solvent CH2Cl2 containing the very weakly coordinating electrolyte [Bu4N][B(C6F5)4], a well-defined reversible one-electron oxidation process is observed on relatively long timescales, which is consistent with the stabilization of the cationic platinum(III) complex in non-coordinating media. Bulk electrolysis of low concentrations of [Pt{(p-BrC6F4)NCH2CH2NEt2}Cl(py)] favors the formation of monomeric [Pt^III{(p-BrC6F4)NCH2CH2NEt2}Cl(py)]⁺. Simulations allow the reversible potential of the Pt^II/Pt^III process and the diffusion coefficient of [Pt^III{(p-BrC6F4)- NCH2CH2NEt2}Cl(py)]⁺ to be calculated. Reversible electrochemical behavior, giving rise to monomeric platinum(III) derivatives, is rare in the field of platinum chemistry.