Many-sample location and scale tests with quantile-function error distributions /by Azmeri Khan

This thesis, using a computer simulation, studies the effect of the normal distribution assumption on the power of several many-sample location and scale test procedures. It also suggests an almost robust parametric test, namely numerical likelihood ratio test (NLRT) for non-normal situations. The NLRT is found better than all of the tests considered. Some real life data sets were used as examples.

Static and dynamic tests for damage identification of a slab-girder structure

Slab-girder bridges are widely used in Australia. The shear connection between reinforced concrete slab and steel girder plays an important role in composite action. In order to test the suitability and efficiency of various vibration-based damage identification methods to assess the integrity of the structure, a scaled composite bridge model was constructed in the laboratory. Some removable shear connectors were specially designed and fabricated to link the beam and slab that were cast separately. In this test, two static loads were acted in the 1/3 points of the structure. In the first stage, dynamic test was conducted under different damage scenarios, where a number of shear connectors were removed step by step. In the second stage, the static load is increased gradually until concrete slab cracked. Static tests were conducted continuously to monitor the deflection and loading on the beam. Dynamic test was carried out before and after concrete cracking. Both static and dynamic results can be used to identify damage in the structure.

Surface wrinkling of the twinning induced plasticity steel during the tensile and torsion tests

'Heterogeneous twinning' is defined as plastic deformation due to the formation and progress of twins resulting in surface wrinkles on the deforming part when the initial grain size is relatively large compared to the typical size of the part. In the case of a Twinning Induced Plasticity (TWIP) steel with an initial grain size of ~160. m, the heterogeneous twinning generated visible wrinkles, an orange peel effect, under medium uni-axial strains. The heterogeneous twinning did not occur in the material subjected to high shear strains. The complications resulting from this phenomenon on strain hardening characterization of the TWIP steels using two commonly used mechanical tests, tensile and torsion are discussed along with some experimental aspects of heterogeneous twinning. © 2014.

Size and power properties of structural break unit root tests

In this article, we compare the small sample size and power properties of a newly developed endogenous structural break unit root test of Narayan and Popp (NP, 2010) with the existing two break unit root tests, namely the Lumsdaine and Papell (LP, 1997) and the Lee and Strazicich (LS, 2003) tests. In contrast to the widely used LP and LS tests, the NP test chooses the break date by maximizing the significance of the break dummy coefficient. Using Monte Carlo simulations, we show that the NP test has better size and high power, and identifies the structural breaks accurately. Power and size comparisons of the NP test with the LP and LS tests reveal that the NP test is significantly superior.

The local power of the CADF and CIPS panel unit root tests

Very little is known about the local power of second generation panel unit root tests that are robust to cross-section dependence. This article derives the local asymptotic power functions of the cross-section argumented Dickey–Fuller Cross-section Augmented Dickey-Fuller (CADF) and CIPS tests of Pesaran (2007), which are among the most popular tests around.

Texture, twinning and uniform elongation of wrought magnesium

A small number of crystal plasticity simulations and tensile tests are carried out with the aim of demonstrating that control of twinning can improve the uniform elongation of magnesium based alloys, It is suggested that this can be accomplished through texture manipulation because texture influences both the fraction of grains that undergo twinning and the strain required for the twinning reaction to go to completion.

Population genetic studies on Australian freshwater crayfish, Cherax destructor (Crustacea: Parastacidae) using allozyme and RAPD markers

Allozyme and Random Amplified Polymorphic DNA (RAPD) variation was surveyed in the freshwater crayfish Cherax destructor Clark, an ecologically and commercially important species that is widespread throughout the freshwater systems of central Australia. At the intra-population level, allozymes revealed a similar level of variation to that found in other freshwater crayfish; RAPDs showed less diversity than allozymes, which was unexpected. At the inter-population level, both techniques revealed significant population structure, both within and between drainages. RAPD results were consistent with phylogeographic patterns previously identified using mtDNA. Although allozyme data showed little geographic pattern in relation to genetic variation based on multidimensional-scaling (MDS) plots on matrices of genetic distance, results of AMOVA and Mantel tests indicated significant population structuring. Each of the mtDNA lineages proposed in a previous study also showed significant genetic structure at similar levels as revealed by RAPDs but different levels by allozymes. These results reject hypotheses previously put forward on genetic homogenisation within the species due to wide-scale translocation. The implications of the findings for conservation and aquaculture of C. destructor are also discussed.

TiNi shape memory alloy foams synthesized by spacer sintering and their properties

Titanium (Ti) and nickel (Ni) elemental powders were blened by ball milling and the ball milled powders were employed to fabricate NiNi shape memory alloy (SMA) foams by space sintering. Effect of ball milling time on phase constitutes of the sintered TiNi alloy foams was studied by X-ray diffraction (XRD) analysis.Scanning election microscopy (SEM) was used to characterize the porous structure, and compressive tests were carried out to evaluate the mechanical properties of the foams. Results indicate the porosities of the TiNi alloy foams can be controlled by using the spacer sincering method, and the porosities show a significant effect on the mechanical prperties and shape memory effect (SME).

Twinning and the ductility of magnesium alloys Part II. “Contraction” twins

Magnesium and its alloys do not in general undergo the same extended range of plasticity as their competitor structural metals. The present work presents part II of a study that examines some of the roles deformation twinning might play in the phenomenon. A series of tensile and compression tests results are reported for common wrought alloys: AZ31, ZK60 and ZM20. These data are combined with EBSD analysis and simple flow stress models to argue the following: (i) that “contraction” double twinning (which enables contraction along the c axis) can decrease the uniform elongation, and (ii) that compression double twinning can also account for shear failure at low strains. The last of these is described as a combined consequence of strain softening of the continuum and the local generation of twin sized voids.

Privatization and economic growth in Australia: the shorthand of a long process

The impact of privatization on economic growth has been little investigated relative to disaggregated approaches. A growth accounting framework is used here to investigate the impact of privatization on growth for the  Australian economy. The contribution of public capital to the private sector and whether the growth process is endogenous or Solow is evaluated. Separate measures of public and private capital are computed in order to estimate their impacts with labour on Australian gross domestic product (GDP) growth for the period 1960 to 2003. A simple growth rates version is found preferred by stationarity and other tests. Labour growth appears to strongly positively influence the growth of GDP. In contrast, public capital growth has no statistically significant effect on GDP growth, or on private capital productivity. The data are consistent with the hypothesis that the coefficients of the growth equation are the same before and during privatization.

Overweight, obesity and metabolic syndrome in rural southeastern Australia

OBJECTIVE: To measure the prevalence of overweight, obesity and the metabolic syndrome (MetS) in rural Australia.

DESIGN, SETTING AND PARTICIPANTS: Cross-sectional surveys were conducted in two rural areas in Victoria and South Australia in 2004-2005. A stratified random sample of men and women aged 25-74 years was selected from the electoral roll. Data were collected by a self-administered questionnaire, physical measurements and laboratory tests.

MAIN OUTCOME MEASURES: Prevalence of overweight and obesity, as defined by body mass index (BMI) and waist circumference; prevalence of MetS and its components.

RESULTS: Data on 806 participants (383 men and 423 women) were analysed. Based on BMI, the prevalence of overweight and obesity combined was 74.1% (95% CI, 69.7%-78.5%) in men and 64.1% (95% CI, 59.5%-68.7%) in women. Based on waist circumference, the prevalence of overweight and obesity was higher in women (72.4%; 95% CI, 68.1%-76.7%) than men (61.9%; 95% CI, 57.0%-66.8%). The overall prevalence of obesity was 30.0% (95% CI, 26.8%-33.2%) based on BMI (> or = 30.0 kg/m(2)) and 44.7% (95% CI, 41.2%-48.1%) based on waist circumference (> or = 102 cm [men] and > or= 88 cm [women]). The prevalence of MetS as defined by the US National Cholesterol Education Program Adult Treatment Panel III 2005 criteria was 27.1% (95% CI, 22.7%-31.6%) in men and 28.3% (95% CI, 24.0%-32.6%) in women; based on International Diabetes Federation criteria, prevalences for men and women were 33.7% (95% CI, 29.0%-38.5%) and 30.1% (95% CI, 25.7%-34.5%), respectively. Prevalences of MetS, central (abdominal) obesity, hyperglycaemia, hypertension and hypertriglyceridaemia increased with age.

CONCLUSIONS: In rural Australia, prevalences of MetS, overweight and obesity are very high. Urgent population-wide action is required to tackle the problem.