Chemically induced phosphorescence from manganese(II) during the oxidation of various compounds by manganese(III), (IV) break and (VII) in acidic aqueous solutions

Chemiluminescence was observed during the manganese(III), (IV) and (VII) oxidations of sodium tetrahydroborate, sodium dithionite, sodium sulfite and hydrazine sulfate in acidic aqueous solution. From the corrected chemiluminescence spectra, the wavelengths of maximum emission were 689±5 and 734±5 nm when the reactions were performed in sodium hexametaphosphate and sodium dihydrogenorthophosphate/ orthophosphoric acid environments, respectively. The corrected phosphorescence spectrum of manganese(II) sulfate in a solution of sodium hexametaphosphate at 77 K exhibited two peaks with maxima at 688 and 730 nm. The chemical and spectroscopic evidence presented strongly supported the postulation that the emission was an example of solution-phase chemically induced phosphorescence of manganese(II) thereby, confirming earlier predictions that the chemiluminescence from acidic potassium permanganate reactions originated from an excited manganese(II) species.

Beryllium (II) complexes of the klaui tripodal ligand cyclopentadienyltris (diethylphosphito-P) cobaltate(-)

The interactions of the beryllium(II) ion with the cyclopentadienyltris(diethylphosphito-P)cobaltate monoanion, L^-, have been investigated, in aqueous solution, by synthetic methods, potentiometry, ESMS, and ¹H, ³¹P, and ⁹Be NMR spectroscopy. L^- has been found able to displace either two or three water molecules in the beryllium(II) coordination sphere, to form mononuclear, dinuclear, and trinuclear derivatives, in which the metal ion is pseudotetrahedrally coordinated. The species [BeL(H₂O)]⁺ and [Be₂L₂(μ-OH)]⁺ have been identified in solution while complexes of formula BeL₂ and [Be₃L₄](ClO₄)₂ have been isolated as solid materials. The species [BeL(OPPh₂)]⁺, closely related to [BeL(H₂O)]⁺, has been characterized in acetone solution and isolated as tetraphenylborate salt. The structure of the unusual trimeric complex [Be₃L₄]²⁺ has been elucidated by an unprecedented 2D ⁹Be-³¹P NMR correlation spectrum showing the presence of a single central beryllium nucleus and two equivalent terminal beryllium nuclei. The three beryllium centers are held together by four cobaltate ligands, which display two different bonding modes: two ligands are terminally linked with all the three oxygen donors to one terminal beryllium, and the other two bridge two metal centers, sharing the oxygen donors between central and terminal beryllium atoms.

The characteristic red chemiluminescence from reactions with acidic potassium permanganate : further spectroscopic evidence for a manganese(II) emitter

A direct comparison of the laser-induced photoluminescence of manganese(II) with the chemiluminescence from the reaction between acidic potassium permanganate and sodium borohydride was used to confirm that the characteristic red emission from this widely used chemiluminescence reagent emanates from an electronically excited manganese(II) species.

Simultaneous control of spectroscopic and electrochemical properties in functionalised electrochemiluminescent tris(2,2'-bipyridine)ruthenium(II) complexes

Using a combination of electrochemical, spectroscopic and computational techniques, we have explored the fundamental properties of a series of ruthenium diimine complexes designed for coupling with other molecules or surfaces for electrochemiluminescence (ECL) sensing applications. With appropriate choice of ligand functionality, it is possible to manipulate emission wavelengths while keeping the redox ability of the complex relatively constant. DFT calculations show that in the case of electron withdrawing substituents such as ester or amide, the excited state is located on the substituted bipyridine ligand whereas in the case of alkyl functionality it is localised on a bipyridine. The factors that dictate annihilation ECL efficiency are interrelated. For example, the same factors that determine ΔG for the annihilation reaction (i.e. the relative energies of the HOMO and LUMO) have a corresponding effect on the energy of the excited state product. As a result, most of the complexes populate the excited state with an efficiency (Φex) of close to 80% despite the relatively wide range of emission maxima. The quantum yield of emission (Φp) and the possibility of competing side reactions are found to be the main determinants of ECL intensity.

Chemiluminescence from osmium(ii) complexes with phenanthroline, diphosphine and diarsine ligands

The reaction of various [Os(L)2(L′)]2+ complexes (where L and L′ are phenanthroline, diphosphine or diarsine ligands) and organic reducing agents after chemical or electrochemical oxidation of the reactants produces an emission of light corresponding to MLCT transitions. In certain instances, the emission was greater than that of [Ru(bipy)3]2+, but the relative signals were dependent on many factors, including reagent concentration, mode of oxidation, reducing agent and the sensitivity of the photodetector over the wavelength range.

Spin-crossover, mesomorphic and thermoelectrical properties of cobalt(II) complexes with alkylated N3-Schiff bases

Three new cobalt(ii) complexes, [Co(L12)2](BF4)2 (1), [Co(L14)2](BF4)2·H2O (2) and [Co(L16)2](BF4)2·H2O (3), where L12-16 are N3-Schiff bases appended with linear C12-16 carbon chains at the nitrogen atoms, were obtained in good yields by facile one-pot reactions. The single crystal X-ray structure of complex 1 shows a tetragonally compressed CoN6 coordination geometry. The melting temperatures of 1-3 were lower than 373 K, while their decomposition temperatures were above 473 K. All complexes have high-spin Co(ii) centres at 300 K and exhibit a columnar mesophase above 383 K. Complexes 1 and 3 showed normal thermal spin-crossover behaviour with weak hysteresis loops at about 320 K. Hence, these complexes showed uncoupled phase transitions (class iiia). The values for the Seebeck coefficient (Se) of the cobalt redox couples formed from 1 and 2 were 1.89 ± 0.02 mV K-1 and 1.92 ± 0.08 mV K-1, respectively, identifying them as potential thermoelectrochemical materials.

LC–MS and GC–MS metabolite profiling of nickel(II) complexes in the latex of the nickel-hyperaccumulating tree Sebertia acuminata and identification of methylated aldaric acid as a new nickel(II) ligand

Targeted liquid chromatography–mass spectrometry (LC–MS) technology using size exclusion chromatography and metabolite profiling based on gas chromatography–mass spectrometry (GC–MS) were used to study the nickel-rich latex of the hyperaccumulating tree Sebertia acuminata. More than 120 compounds were detected, 57 of these were subsequently identified. A methylated aldaric acid (2,4,5-trihydroxy-3-methoxy-1,6-hexan-dioic acid) was identified for the first time in biological extracts and its structure was confirmed by 1D and 2D nuclear magnetic resonance (NMR) spectroscopy. After citric acid, it appears to be one of the most abundant small organic molecules present in the latex studied. Nickel(II) complexes of stoichiometry NiII:acid = 1:2 were detected for these two acids as well as for malic, itaconic, erythronic, galacturonic, tartaric, aconitic and saccharic acids. These results provide further evidence that organic acids may play an important role in the transport and possibly in the storage of metal ions in hyperaccumulating plants.

Synthesis, structure and spectral properties of dithiocarbamato bridged dirhenium(III,II) complexes: a combined experimental and theoretical study

Sodium salts of dimethyldithiocarbamate, diethyldithiocarbamate and pyrrolidinedithiocarbamate react with the multiply bonded paramagnetic dirhenium(III,II) complex Re₂(μ-O₂CCH₃)Cl₄(μ-dppm)₂, 1 (dppm = Ph₂PCH₂PPh₂) in refluxing ethanol to afford the paramagnetic substitution products of the type Re₂(η²-S,S)₂(μ-S,S)(μ-Cl)₂(μ-dppm), where S,S represents the dithiocarbamato ligands [S,S = S₂CNMe₂, 4(L_Me); S₂CNEt₂, 4(L_Et) and S₂CN(CH₂)₄, 4(L_Pyr)]. These are the first examples of dirhenium complexes that contain bridging dithiocarbamato ligand along with the dppm ligand. These complexes have very similar spectral (UV-Vis, IR, EPR) and electrochemical properties which are also reported. The identity of 4(L_Et) has been established by single-crystal X-ray structure determination (Re-Re distance 2.6385 (9) Å) and is shown to have edge-shared bioctahedral structure. The electronic structure and the absorption spectra of the complexes are scrutinized by the density functional theory (DFT) and time-dependent density functional theory (TD-DFT) analyses.

Complexes of the tripodal nitrilotrimethylenetrisphosphonic (H6L) and P,P',P''-triphenylnitrilotrimethylenetrisphosphinic (H3L) acids with the copper(II) ion. Synthesis and charaterization of [Hpy][Cu(H3L)(H2O)] and [Cu(HL)(py)]2.2Me2CO

The complexes [Hpy][Cu(H₃L)(H2O)] 1 (L⁶ = nitrilotrimethylenetrisphosphonate) and [Cu(HL°)(py)]₂·2Me₂CO 2 [(L°)³ = P,P,P" -triphenylnitrilotrismethylenetrisphosphinate)] have been isolated and characterized by X-ray crystallography, near IR-visible spectroscopy and magnetic measurements. The structure determination has shown the complexes to be constituted by monomeric and dimeric units respectively. In the monomer the metal atom is surrounded by the phosphonate ligand and a water molecule, with a geometry between a trigonal bipyramid and a square pyramid. The two copper atoms in the dimer are held together by an arm of the tripod ligand, with a pyridine molecule as additional ligand, and display octahedral geometry. The presence of monomeric and dimeric species in aqueous solutions of 1 and 2 has been shown by ESMS studies. The formation in water solution of the dimer [{Cu(H₃L)}₂]^2-, as a minor species, has been supported by potentiometric measurements, whereas only the monomeric anion [CuL°] has been ascertained to be present. In general the ligand H₃L° forms less stable copper(II) complexes than H₆L.

Soluble manganese(IV) as a chemiluminescence reagent for the determination of opiate alkaloids, indoles and analytes of forensic Interest

We present the results of our investigations into the use of soluble manganese(IV) as a chemiluminescence reagent, which include a significantly faster method of preparation and a study on the effect of formaldehyde and orthophosphoric acid concentration on signal intensity. Chemiluminescence detection was applied to the determination of 16 analytes, including opiate alkaloids, indoles and analytes of forensic interest, using flow injection analysis methodology. The soluble manganese(IV) reagent was less selective than either acidic potassium permanganate or tris(2,2′-bipyridyl)ruthenium(III) and therefore provided a more universal chemiluminescence detection system for HPLC. A broad spectral distribution with a maximum at 730 ± 5 nm was observed for the reaction between the soluble manganese(IV) and a range of analytes, as well as the background emission from the reaction with the formaldehyde enhancer. This spectral distribution matches that reported for chemiluminescence reactions with acidic potassium permanganate, where a manganese(II) emitting species was elucidated. This provides further evidence that the emission evoked in reactions with soluble manganese(IV) also emanates from a manganese(II) species, and not bimolecular singlet oxygen as suggested by previous authors.

Manganese (III) and manganese (IV) as chemiluminescence reagents : a review

Although potassium permanganate [Mn(VII)] has been used extensively as a chemiluminescence reagent for many decades, other manganese-based oxidants have only recently been explored for this purpose. There is strong evidence to suggest that, like permanganate, manganese(III) and manganese(IV) oxidants react with many molecules to produce an excited manganese(II) species that emits light. However, these reagents differ markedly in terms of selectivity, and possess characteristics that provide new avenues for detection, such as the immobilisation of solid manganese dioxide, the production of ‘soluble’ manganese(IV) nanoparticles, and the electrochemical generation of manganese(III). In this review we examine the emergence of these alternative manganese oxidants as chemiluminescence reagents.

Electrochemiluminescent monomers for solid support syntheses of Ru(II)-PNA bioconjugates : multimodal biosensing tools with enhanced duplex stability

The feasibility of devising a solid support mediated approach to multimodal Ru(II)-peptide nucleic acid (PNA) oligomers is explored. Three Ru(II)-PNA-like monomers, [Ru(bpy)2(Cpp-L-PNA-OH)]2+ (M1), [Ru(phen)2(Cpp-L-PNA-OH)]2+ (M2), and [Ru(dppz)2(Cpp-L-PNA-OH)]2+ (M3) (bpy = 2,2′-bipyridine, phen = 1,10-phenanthroline, dppz = dipyrido[3,2-a:2′,3′-c]phenazine, Cpp-L-PNA-OH = [2-(N-9-fluorenylmethoxycarbonyl)aminoethyl]-N-[6-(2-(pyridin-2yl)pyrimidine-4-carboxamido)hexanoyl]-glycine), have been synthesized as building blocks for Ru(II)-PNA oligomers and characterized by IR and 1H NMR spectroscopy, mass spectrometry, electrochemistry and elemental analysis. As a proof of principle, M1 was incorporated on the solid phase within the PNA sequences H-g-c-a-a-t-a-a-a-a-Lys-NH2 (PNA1) and H-P-K-K-K-R-K-V-g-c-a-a-t-a-a-a-a-lys-NH2 (PNA4) to give PNA2 (H-g-c-a-a-t-a-a-a-a-M1-lys-NH2) and PNA3 (H-P-K-K-K-R-K-V-g-c-a-a-t-a-a-a-a-M1-lys-NH2), respectively. The two Ru(II)-PNA oligomers, PNA2 and PNA3, displayed a metal to ligand charge transfer (MLCT) transition band centered around 445 nm and an emission maximum at about 680 nm following 450 nm excitation in aqueous solutions (10 mM PBS, pH 7.4). The absorption and emission response of the duplexes formed with the cDNA strand (DNA: 5′-T-T-T-T-T-T-T-A-T-T-G-C-T-T-T-3′) showed no major variations, suggesting that the electronic properties of the Ru(II) complexes are largely unaffected by hybridization. The thermal stability of the PNA·DNA duplexes, as evaluated from UV melting experiments, is enhanced compared to the corresponding nonmetalated duplexes. The melting temperature (Tm) was almost 8 °C higher for PNA2·DNA duplex, and 4 °C for PNA3·DNA duplex, with the stabilization attributed to the electrostatic interaction between the cationic residues (Ru(II) unit and positively charged lysine/arginine) and the polyanionic DNA backbone. In presence of tripropylamine (TPA) as co-reactant, PNA2, PNA3, PNA2·DNA and PNA3·DNA displayed strong electrochemiluminescence (ECL) signals even at submicromolar concentrations. Importantly, the combination of spectrochemical, thermal and ECL properties possessed by the Ru(II)-PNA sequences offer an elegant approach for the design of highly sensitive multimodal biosensing tools.

New light from an old reagent: chemiluminescence from the reaction of potassium permanganate with sodium borohydride

When aqueous sodium borohydride (50 mM) is added to a solution of potassium permanganate (1mM, in sodium hexametaphosphate) at acidic pH, bright red-orange emission is easily visible in a darkened room. This chemiluminescence emission is due to an excited state of manganese (II) that undergoes solution phase phosphorescence and provides an excellent opportunity for students to explore the relationship between the initial oxidation state of the manganese and the likelihood of luminescence. Not surprisingly Mn(VII), Mn(IV) and Mn(III) all give rise to chemiluminescence where as Mn(II) fails to react.