Microstructural and magnetic properties of Nd-Fe-B alloys processed by equal-channel angular pressing

Equal-channel angular pressing (ECAP) is a well-established thermo-mechanical processing technique. This technique allows virtually unlimited strain and manipulation of texture by processing route, while the cross-section of the sample remains unchanged during processing. In order to clarify the effectiveness of ECAP on preparing anisotropic permanent magnets, the microstructure and magnetic properties of a melt-spun Nd13.5Fe73.8Co6.7B5.6Ga0.4 alloy processed at 773-K for 300-s by ECAP were investigated. Macrotexture analysis carried out for the exit channel of ECAP shows that the basal plane of the tetragonal Nd2Fe14B crystal aligns parallel to the shear band, i.e., the c-axis texture formation normal to the shear band induced by the ECAP process. Due to this texture formation, the technical magnetization behaviour becomes anisotropic, and the remanent magnetization is clearly enhanced along the direction perpendicular to the shear band. This anisotropic microstructure is realized at a relatively low processing temperature of 773-K, well below the melting point of the Nd-rich intergranular phase. As a consequence of this lower processing temperature, the nanostructure of the melt-spun alloy remains approximately 20 to 30-nm, considerably smaller than the typical grain size obtained after conventional die-upsetting. Our study demonstrates that equal-channel angular pressing has a potential for realising anisotropic nanostructured magnets.

Effect of processing parameters on the magnetic properties and macrotexture of a Nd13.5Fe73.8Co6.7B5.6Ga0.4 alloy processed by equal channel angular pressing with back pressure

Equal channel angular pressing (ECAP) is a well-established thermo-mechanical processing technique, which could induce the c-axis texture of Nd2Fe14B in a melt-spun Nd13.5Fe73.8Co6.7B5.6Ga0.4 alloy. However, the effects of ECAP processing parameters, such as temperature, back pressure (BP), and multiple-pass ECAP routes, remain unknown for this alloy. In this paper, we have investigated the effects of these processing parameters on the c-axis texture formation. It is found by X-ray diffraction macrotexture analysis that the maximum intensity of (001) pole figures for the tetragonal-Nd2Fe14B phase (Imax) shows an increase from 2.7 to 4.1 m.r.d. (multiples of random distribution) by increasing the ECAP temperature from 723 to 823 K, while the difference in remanent magnetization between easy and hard directions (Δ Mr) rises from 24.0 to 41.5 Am2/kg. When the BP was increased from 0.25 to 0.5 GPa at 823 K, Imax showed an increase from 2.8 to 4.1 m.r.d. However, Imax saturated for BPs above 0.5 GPa, suggesting that BP has limited effect on the texture formation, although it is necessary for the compaction of the alloy powders. Two multiple-pass ECAP routes conventionally known as routes A and C were employed for two-pass ECAP at 823 K. It is found that route A processing is effective in enhancing the texture formation, while the texture is lost by a subsequent pressing when adopting route C. Therefore, the compaction of Nd13.5Fe73.8Co6.7B5.6Ga0.4 alloy powder using route A ECAP passes with 0.5 GPa BP at 823 K results in pronounced texture, which is beneficial for anisotropic hard magnetic properties.

Boron nitride nanotubes : a novel vector for targeted magnetic drug delivery

Whereas several biomedical applications of carbon nanotubes have been proposed, the use of boron nitride nanotubes (BNNTs) in this field has been largely unexplored despite their unique and potentially useful properties. Our group has recently initiated an experimental program aimed at the exploration of the interactions between BNNTs and living cells. In the present paper, we report on the magnetic properties of BNNTs containing Fe catalysts which confirm the feasibility for their use as nanovectors for targeted drug delivery. The magnetisation curves of BNNTs characterised by the present study are typical of superparamagnetic materials with important parameters, including magnetic permeability and magnetic momentum, derived by employing Langevin theory. In-vitro tests have demonstrated the feasibility for influencing the uptake of BNNTs by living cells by exposure to an external magnetic source. A finite element method analysis devised to predict this effect produced predictive data with close agreement with the experimental observations.

Electrochemical properties and applications of ionic liquids

This book presents the latest research in electrochemical properties and applications of ionic liquids. While there is no universally agreed upon definition, an ionic liquid may be conveniently described as a compound composed entirely of ions that is a liquid at temperatures less than 100 °C. However, this is an arbitrary definition employed to distinguish ionic liquids from classically well-known molten salts. This book addresses a comprehensive overview of the area, because it is obvious that ionic liquids have the ability to offer many advantages, but also some disadvantages, over traditional molecular solvent (electrolyte) media in the field of electrochemistry.