Vitamin D in Australia : issues and recommendations

BACKGROUND A significant number of Australians and people from specific groups within the community are suffering from vitamin D deficiency. It is no longer acceptable to assume that all people in Australia receive adequate vitamin D from casual exposure to sunlight.

OBJECTIVE This article provides information on causes, consequences, treatment and prevention of vitamin D deficiency in Australia.

DISCUSSION People at high risk of vitamin D deficiency include the elderly, those with skin conditions where avoidance of sunlight is required, dark skinned people (particularly women during pregnancy or if veiled) and patients with malabsorption, eg. coeliac disease. For most people, deficiency can be prevented by 5–15 minutes exposure of face and upper limbs to sunlight 4–6 times per week. If this is not possible then a vitamin D supplement of at least 400 IU* per day is recommended. In cases of established vitamin D deficiency, supplementation with 3000-5000 IU per day for at least 1 month is required to replete body stores. Increased availability of larger dose preparations of cholecalciferol would be a useful therapy in the case of severe deficiencies. * 40 IU (international units) = 1 µg

Sizing the association between lifestyle behaviours and fatness in a large, heterogeneous sample of youth of multiple ethnicities from 4 countries

Background: <div>The magnitude of the relationship between lifestyle risk factors for obesity and adiposity is not clear. The aim of this study was to clarify this in order to determine the level of importance of lifestyle factors in obesity aetiology.

Methods:
A cross-sectional analysis was carried out on data on youth who were not trying to change weight (n = 5714), aged 12 to 22 years and from 8 ethnic groups living in New Zealand, Australia, Fiji and Tonga. Demographic and lifestyle data were measured by questionnaires. Fatness was measured by body mass index (BMI), BMI z-score and bioimpedance analysis, which was used to estimate percent body fat and total fat mass (TFM). Associations between lifestyle and body composition variables were examined using linear regression and forest plots.

Results:
TV watching was positively related to fatness in a dose-dependent manner. Strong, dose-dependent associations were observed between fatness and soft drink consumption (positive relationship), breakfast consumption (inverse relationship) and after-school physical activity (inverse relationship). Breakfast consumption-fatness associations varied in size across ethnic groups. Lifestyle risk factors for obesity were associated with percentage differences in body composition variables that were greatest for TFM and smallest for BMI.

Conclusions:
Lifestyle factors were most strongly related to TFM, which suggests that studies that use BMI alone to quantify fatness underestimate the full effect of lifestyle on adiposity. This study clarifies the size of lifestyle-fatness relationships observed in previous studies.div>

Interviewer experience, vocal skills and the recruitment of telephone survey respondents

Although telephone interviewing is the main market research method used in Australia, response rates are often low and possibly declining overall. Interviewers are the means by which respondents are recruited and it was hypothesised that their verbal skills and experience would affect response rates. Using data from four market research companies, interviewer experience was shown to be positively related to strike rate (interviews per hour). Apart from having a discernible accent which dampened strike rates and increased refusals, other verbal characteristics had only a weak effect on response rates.

Simultaneous control of spectroscopic and electrochemical properties in functionalised electrochemiluminescent tris(2,2'-bipyridine)ruthenium(II) complexes

Using a combination of electrochemical, spectroscopic and computational techniques, we have explored the fundamental properties of a series of ruthenium diimine complexes designed for coupling with other molecules or surfaces for electrochemiluminescence (ECL) sensing applications. With appropriate choice of ligand functionality, it is possible to manipulate emission wavelengths while keeping the redox ability of the complex relatively constant. DFT calculations show that in the case of electron withdrawing substituents such as ester or amide, the excited state is located on the substituted bipyridine ligand whereas in the case of alkyl functionality it is localised on a bipyridine. The factors that dictate annihilation ECL efficiency are interrelated. For example, the same factors that determine &Delta;G for the annihilation reaction (i.e. the relative energies of the HOMO and LUMO) have a corresponding effect on the energy of the excited state product. As a result, most of the complexes populate the excited state with an efficiency (Φex) of close to 80% despite the relatively wide range of emission maxima. The quantum yield of emission (Φp) and the possibility of competing side reactions are found to be the main determinants of ECL intensity.

Chemiluminescence detection with water-soluble iridium(III) complexes containing a sulfonate-functionalised ancillary ligand

The chemiluminescence from four cyclometalated iridium(III) complexes containing an ancillary bathophenanthroline-disulfonate ligand exhibited a wide range of emission colours (green to red), and in some cases intensities that are far greater than the commonly employed benchmark reagent, [Ru(bpy)3](2+). A similar complex incorporating a sulfonated triazolylpyridine-based ligand enabled the emission to be shifted into the blue region of the spectrum, but the responses with this complex were relatively poor. DFT calculations of electronic structure and emission spectra support the experimental findings.

Photoredox catalysis of intramolecular cyclizations with a reusable silica-bound ruthenium complex

Photoredox catalysis with the use of a stable, reusable silica-bound chromophore was applied to the intramolecular cyclization of a series of 2-benzylidenehydrazinecarbothioamides to give 5-phenyl-1,3,4-thiadiazol-2-amines. The catalyst was readily prepared by carbodiimide-mediated coupling of commercially available amine-functionalized silica beads to a carboxylic acid functionalized ruthenium complex. The immobilized catalyst was readily removed from the reaction product by filtration and was used eight times without loss of catalytic activity. This simple, safe, and practical method is an attractive alternative to conventional procedures.

Blue electrogenerated chemiluminescence from water-soluble iridium complexes containing sulfonated phenylpyridine or tetraethylene glycol derivatized triazolylpyridine ligands

Incorporating phenylpyridine- and triazolylpyridine-based ligands decorated with methylsulfonate or tetraethylene glycol (TEG) groups, a series of iridium(III) complexes has been created for green and blue electrogenerated chemiluminescence under analytically useful aqueous conditions, with tri-n-propylamine as a coreactant. The relative electrochemiluminescence (ECL) intensities of the complexes were dependent on the sensitivity of the photodetector over the wavelength range and the pulse time of the applied electrochemical potential. In terms of the integrated area of corrected ECL spectra, with a pulse time of 0.5 s, the intensities of the Ir(III) complexes were between 18 and 102 % that of [Ru(bpy)3 ](2+) (bpy=2,2'-bipyridine). However, when the intensities were measured with a typical bialkali photomultiplier tube, the signal of the most effective blue emitter, [Ir(df-ppy)2 (pt-TEG)](+) (df-ppy=2-(2,4-difluorophenyl)pyridine anion, pt-TEG=1-(2-(2-(2-(2-hydroxyethoxy)ethoxy)ethoxy)ethyl)-4-(2-pyridyl)-1,2,3-triazole), was over 1200 % that of the orange-red emitter [Ru(bpy)3 ](2+) . A combined experimental and theoretical investigation of the electrochemical and spectroscopic properties of the Ir(III) complexes indicated that the greater intensity from [Ir(df-ppy)2 (pt-TEG)](+) relative to those of the other Ir(III) complexes resulted from a combination of many factors, rather than being significantly favored in one area.

Considering the chemical energy requirements of the tri-n-propylamine co-reactant pathways for the judicious design of new electrogenerated chemiluminescence detection systems

The introduction of a 'co-reactant' was a critical step in the evolution of electrogenerated chemiluminescence (ECL) from a laboratory curiosity to a widely utilised detection system. In conjunction with a suitable electrochemiluminophore, the co-reactant enables generation of both the oxidised and reduced precursors to the emitting species at a single electrode potential, under the aqueous conditions required for most analytical applications. The most commonly used co-reactant is tri-n-propylamine (TPrA), which was developed for the classic tris(2,2'-bipyridine)ruthenium(ii) ECL reagent. New electrochemiluminophores such as cyclometalated iridium(iii) complexes are also evaluated with this co-reactant. However, attaining the excited states in these systems can require much greater energy than that of tris(2,2'-bipyridine)ruthenium(ii), which has implications for the co-reactant reaction pathways. In this tutorial review, we describe a simple graphical approach to characterise the energetically feasible ECL pathways with TPrA, as a useful tool for the development of new ECL detection systems.

Iridium(III) N-heterocyclic carbene complexes: an experimental and theoretical study of structural, spectroscopic, electrochemical and electrogenerated chemiluminescence properties

Four cationic heteroleptic iridium(III) complexes have been prepared from methyl- or benzyl-substituted chelating imidazolylidene or benzimidazolylidene ligands using a Ag(I) transmetallation protocol. The synthesised iridium(III) complexes were characterised by elemental analysis, (1)H and (13)C NMR spectroscopy and the molecular structures for three complexes were determined by single crystal X-ray diffraction. A combined theoretical and experimental investigation into the spectroscopic and electrochemical properties of the series was performed in order to gain understanding into the factors influencing photoluminescence and electrochemiluminescence efficiency for these complexes, with the results compared with those of similar NHC complexes of iridium and ruthenium. The N^C coordination mode in these complexes is thought to stabilise thermally accessible non-emissive states relative to the case with analogous complexes with C^C coordinated NHC ligands, resulting in low quantum yields. As a result of this and the instability of the oxidised and reduced forms of the complexes, the electrogenerated chemiluminescence intensities for the compounds are also low, despite favourable energetics. These studies provide valuable insights into the factors that must be considered when designing new NHC-based luminescent complexes.