A novel monotonic fixed-point algorithm for l1-regularized least square vector and matrix problem

Least square problem with l₁ regularization has been proposed as a promising method for sparse signal reconstruction (e.g., basis pursuit de-noising and compressed sensing) and feature selection (e.g., the Lasso algorithm) in signal processing, statistics, and related fields. These problems can be cast as l₁-regularized least-square program (LSP). In this paper, we propose a novel monotonic fixed point method to solve large-scale l₁-regularized LSP. And we also prove the stability and convergence of the proposed method. Furthermore we generalize this method to least square matrix problem and apply it in nonnegative matrix factorization (NMF). The method is illustrated on sparse signal reconstruction, partner recognition and blind source separation problems, and the method tends to convergent faster and sparser than other l₁-regularized algorithms.

Rapid determination of protein contents in microencapsulated fish oil supplements by ATR-FTIR spectroscopy and partial least square regression (PLSR) analysis

Following the recent success in quantitative analysis of essential fatty acid compositions in a commercial microencapsulated fish oil (?EFO) supplement, we extended the application of portable attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopic technique and partial least square regression (PLSR) analysis for rapid determination of total protein contents-the other major component in most commercial ?EFO powders. In contrast to the traditional chromatographic methodology used in a routine amino acid analysis (AAA), the ATR-FTIR spectra of the ?EFO powder can be acquired directly from its original powder form with no requirement of any sample preparation, making the technique exceptionally fast, noninvasive, and environmentally friendly as well as being cost effective and hence eminently suitable for routine use by industry. By optimizing the spectral region of interest and number of latent factors through the developed PLSR strategy, a good linear calibration model was produced as indicated by an excellent value of coefficient of determination R2 = 0.9975, using standard ?EFO powders with total protein contents in the range of 140-450 mg/g. The prediction of the protein contents acquired from an independent validation set through the optimized PLSR model was highly accurate as evidenced through (1) a good linear fitting (R2 = 0.9759) in the plot of predicted versus reference values, which were obtained from a standard AAA method, (2) lowest root mean square error of prediction (11.64 mg/g), and (3) high residual predictive deviation (6.83) ranked in very good level of predictive quality indicating high robustness and good predictive performance of the achieved PLSR calibration model. The study therefore demonstrated the potential application of the portable ATR-FTIR technique when used together with PLSR analysis for rapid online monitoring of the two major components (i.e., oil and protein contents) in finished ?EFO powders in the actual manufacturing setting.

The impact of ownership structure on corporate debt policy : two stage least square simultaneous model approach for post crisis period : evidence from Kuala Lumpur Stock Exchange

Ownership concentration as a governance mechanism has received considerable attention among academician, practitioners as well as policy makers because large-block shareholders are increasingly active in their demands that corporations adopt effective governance mechanisms to control managerial decisions, which include corporate debt policy. Earlier study on the agency model of the firm widely recognizes that the managerial ownership and external debt play an important role in mitigating agency conflicts and enhancing firm value. They also found that increase in the external monitors, for example the institutional investors, can actually play a useful role in limiting agency problems in the firm. This paper, using 100 Composite Index companies from Brusa Malaysia between 1998 to 2002 explores the impact of institutional holdings on managerial ownership and debt policy in an integrated framework by using a simultaneous equations estimation procedure (2SLS). The findings show that there is a significant impact of institutional ownership which serves effective control mechanism on managerial ownership and corporate debt policy as hypothesized. Findings of such evidence suggest that institutional holding thus have played an important role in managers' strategic management decision and reduce agency conflict. In addition, corporate debt policy too is governed by managerial ownership and exhibited a negative relation.

An empirical study of business intelligence impact on corporate performance management

Business intelligence technologies have received much attention recently from both academics and practitioners. However, the impact of business intelligence (BI) on corporate performance management (CPM) has not yet been investigated. To address this gap, we conducted a large-scale survey collecting data from 337 senior managers. Partial least square method was employed to analyse the survey data. Findings suggest that the more effective the BI implementation, the more effective the CPM-related planning and analytic practices. Interestingly, size and industry sector do not influence the relationships between BI effectiveness and the CPM. This research offers a number of implications for theory and practice.

Mixing vector construction for single channel semi-blind source separation using empirical mode decomposition

The Empirical Mode Decomposition (EMD) method is a commonly used method for solving the problem of single channel blind source separation (SCBSS) in signal processing. However, the mixing vector of SCBSS, which is the base of the EMD method, has not yet been effectively constructed. The mixing vector reflects the weights of original signal sources that form the single channel blind signal source. In this paper, we propose a novel method to construct a mixing vector for a single channel blind signal source to approximate the actual mixing vector in terms of keeping the same ratios between signal weights. The constructed mixing vector can be used to improve signal separations. Our method incorporates the adaptive filter, least square method, EMD method and signal source samples to construct the mixing vector. Experimental tests using audio signal evaluations were conducted and the results indicated that our method can improve the similar values of sources energy ratio from 0.2644 to 0.8366. This kind of recognition is very important in weak signal detection.

Modelling for injection moulding process based on principal component regression method

Determination of the optimal operating condition for moulding process has been of special interest for many researchers. To determine the optimal setting, one has to derive the model of injection moulding process first which is able to map the relationship between the input process control factors and output responses. One of most popular modeling techniques is the linear least square regression due to its effectiveness and completeness. However, the least square regression was found to be very sensitive to the outliers and failed to provide a reliable model if the control variables are highly related with each other. To address this problem, a new modeling method based on principal component regression was proposed in this paper. The distinguished feature of our proposed method is it does not only consider the variance of covariance matrix of control variables but also consider the correlation coefficient between control variables and target variables to be optimised. Such a modelling method has been implemented into a commercial optimisation software and field test results demonstrated the performance of the proposed modelling method.

Conversion of the hot torsion test results into flow curve with multiple regimes of hardening

The method of Fields and Backofen has been commonly used to reduce the data obtained by hot torsion test into flow curves. The method, however, is most suitable for materials with monotonic strain hardening behaviour. Other methods such as Stüwe’s method, tubular specimens, differential testing and the inverse method, each suffer from similar drawbacks. It is shown in the current work that for materials with multiple regimes of hardening any method based on an assumption of constant hardening indices introduces some errors into the flow curve obtained from the hot torsion test. Therefore such methods do not enable accurate prediction of onset of recrystallisation where slow softening occurs. A new method to convert results from the hot torsion test into flow curves by taking into account the variation of constitutive parameters during deformation is presented. The method represents the torque twist data by a parametric linear least square model in which Euler and hyperbolic coefficients are used as the parameters. A closed form relationship obtained from the mathematical representation of the data is employed next for flow stress determination. Two different solution strategies, the method of normal equations and singular value decomposition, were used for parametric modelling of the data with hyperbolic basis functions. The performance of both methods is compared. Experimental data obtained by FHTTM, a flexible hot torsion test machine developed at IROST, for a C–Mn austenitic steel was used to demonstrate the method. The results were compared with those obtained using constant strain and strain rate hardening characteristics.

Quantitative determination of fatty acid compositions in micro-encapsulated fish-oil supplements using Fourier transform infrared (FTIR) spectroscopy

The research describes a rapid method for the determination of fatty acid (FA) contents in a micro-encapsulated fish-oil (μEFO) supplement by using attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopic technique and partial least square regression (PLSR) analysis. Using the ATR-FTIR technique, the μEFO powder samples can be directly analysed without any pre-treatment required, and our developed PLSR strategic approach based on the acquired spectral data led to production of a good linear calibration with R^₂ = 0.99. In addition, the subsequent predictions acquired from an independent validation set for the target FA compositions (i.e., total oil, total omega-3 fatty acids, EPA and DHA) were highly accurate when compared to the actual values obtained from standard GC-based technique, with plots between predicted versus actual values resulting in excellent linear fitting (R² ⩾ 0.96) in all cases. The study therefore demonstrated not only the substantial advantage of the ATR-FTIR technique in terms of rapidness and cost effectiveness, but also its potential application as a rapid, potentially automated, online monitoring technique for the routine analysis of FA composition in industrial processes when used together with the multivariate.

ICT Interventions for Schoolgirls Do Matter! Understanding the Factors Influencing ICT Career Intentions through Partial Least Squares Analysis.

Intervention programs aimed at promoting study and work opportunities in the Information and Communications Technology (ICT) field to schoolgirls (Interventions) have been encouraged to combat a decline in the interest among girls to study ICT at school. The goal of our study is to investigate the influence of Interventions on schoolgirls’ intentions to choose a career in the ICT field by analysing the  comprehensive survey data (n = 3577), collected during four interventions in Australia, using the Partial Least Squares method. Our study is also aimed at identifying other factors influencing ICT career intentions. We found that the attitude towards interventions has an indirect influence on ICT career intentions by affecting interest in ICT. Our results also challenge several existing theoretical studies by showing that factors that had previously been suggested as influencers were found to have little or no impact in this study, these being same-sex education and computer usage.

Identifying the determinants of renewable energy consumption in leading renewable energy investor emerging countries

This article analyses the determinants of renewable energy consumption in six major emerging economies who are proactively accelerating the adoption of renewable energy. The long-run elasticities from both panel methods (fully modified ordinary least square and dynamic least square) and the time series method (autoregressive distributed lag) seem to be pretty consistent. For Brazil, China, India and Indonesia, in the long-run, renewable energy consumption is significantly determined by income and pollutant emission. However, for Philippines and Turkey, income seems to be the main driver for renewable energy consumption. In the short-run, for Brazil and China bi-directional causalities between renewable energy and income; and between renewable energy and pollutant emission are found. This research justifies the efforts undertaken by emerging countries to reduce the carbon intensity by increasing the energy efficiency and substantially increasing the share of renewable in the overall energy mix

Stochastic optimization models for energy management in carbonization process of carbon fiber production

Industrial producers face the task of optimizing production process in an attempt to achieve the desired quality such as mechanical properties with the lowest energy consumption. In industrial carbon fiber production, the fibers are processed in bundles containing (batches) several thousand filaments and consequently the energy optimization will be a stochastic process as it involves uncertainty, imprecision or randomness. This paper presents a stochastic optimization model to reduce energy consumption a given range of desired mechanical properties. Several processing condition sets are developed and for each set of conditions, 50 samples of fiber are analyzed for their tensile strength and modulus. The energy consumption during production of the samples is carefully monitored on the processing equipment. Then, five standard distribution functions are examined to determine those which can best describe the distribution of mechanical properties of filaments. To verify the distribution goodness of fit and correlation statistics, the Kolmogorov-Smirnov test is used. In order to estimate the selected distribution (Weibull) parameters, the maximum likelihood, least square and genetic algorithm methods are compared. An array of factors including the sample size, the confidence level, and relative error of estimated parameters are used for evaluating the tensile strength and modulus properties. The energy consumption and N2 gas cost are modeled by Convex Hull method. Finally, in order to optimize the carbon fiber production quality and its energy consumption and total cost, mixed integer linear programming is utilized. The results show that using the stochastic optimization models, we are able to predict the production quality in a given range and minimize the energy consumption of its industrial process.

Unified selective sorting approach to analyse multi-electrode extracellular data

Extracellular data analysis has become a quintessential method for understanding the neurophysiological responses to stimuli. This demands stringent techniques owing to the complicated nature of the recording environment. In this paper, we highlight the challenges in extracellular multi-electrode recording and data analysis as well as the limitations pertaining to some of the currently employed methodologies. To address some of the challenges, we present a unified algorithm in the form of selective sorting. Selective sorting is modelled around hypothesized generative model, which addresses the natural phenomena of spikes triggered by an intricate neuronal population. The algorithm incorporates Cepstrum of Bispectrum, ad hoc clustering algorithms, wavelet transforms, least square and correlation concepts which strategically tailors a sequence to characterize and form distinctive clusters. Additionally, we demonstrate the influence of noise modelled wavelets to sort overlapping spikes. The algorithm is evaluated using both raw and synthesized data sets with different levels of complexity and the performances are tabulated for comparison using widely accepted qualitative and quantitative indicators.

A framework for mixed-type multi-outcome prediction with applications in healthcare

Health analysis often involves prediction of multiple outcomes of mixed-type. Existing work is restrictive to either a limited number or specific outcome types. We propose a framework for mixed-type multi-outcome prediction. Our proposed framework proposes a cumulative loss function composed of a specific loss function for each outcome type - as an example, least square (continuous outcome), hinge (binary outcome), poisson (count outcome) and exponential (non-negative outcome). Tomodel these outcomes jointly, we impose a commonality across the prediction parameters through a common matrix-Normal prior. The framework is formulated as iterative optimization problems and solved using an efficient Block coordinate descent method (BCD). We empirically demonstrate both scalability and convergence. We apply the proposed model to a synthetic dataset and then on two real-world cohorts: a Cancer cohort and an Acute Myocardial Infarction cohort collected over a two year period. We predict multiple emergency related outcomes - as example, future emergency presentations (binary), emergency admissions (count), emergency length-of-stay-days (non-negative) and emergency time-to-next-admission-day (non-negative). Weshow that the predictive performance of the proposed model is better than several state-of-the-art baselines.

Improving the performance of the LMS and RLS algorithms for adaptive equalizer

In this paper, we present the experiment results of three adaptive equalization algorithms: least-mean-square (LMS) algorithm, discrete cosine transform-least mean square (DCT-LMS) algorithm, and recursive least square (RLS) algorithm. Based on the experiments, we obtained that the convergence rate of LMS is slow; the convergence rate of RLS is great faster while the computational price is expensive; the performance of that two parameters of DCT-LMS are between the previous two algorithms, but still not good enough. Therefore we will propose an algorithm based on H2 in a coming paper to solve the problems.