Structure and thickness optimization of active layer in nanoscale organic solar cells

 This paper presents the development of a two-dimensional model of multilayer bulk heterojunction organic nanoscale solar cells, consisting of the thickness of active layer and morphology of the device. The proposed model is utilized to optimize the device parameters in order to achieve the best performance using particle swarm optimization algorithm. The organic solar cells under research are from poly (3-hexylthiophene) and [6,6]-phenyl C61-butyric acid methyl ester type which are modelled to be investigated for performance enhancement. A three-dimensional fitness function is proposed involving domain size and active layer thickness as variables. The best results out of 20 runs of optimization show that the optimized value for domain size is 17 nm, while the short-circuit current vs. voltage characteristic shows a very good agreement with the experimental results obtained by previous researchers. © 2014 Springer Science+Business Media New York

Retinal nerve fibre layer thinning associated with diabetic peripheral neuropathy

Aims
To investigate the relationship between retinal nerve fibre layer thickness and peripheral neuropathy in patients with Type 2 diabetes, particularly in those who are at higher risk of foot ulceration.

Methods
Global and sectoral retinal nerve fibre layer thicknesses were measured at 3.45 mm diameter around the optic nerve head using optical coherence tomography (OCT). The level of neuropathy was assessed in 106 participants (82 with Type 2 diabetes and 24 healthy controls) using the 0–10 neuropathy disability score. Participants were stratified into four neuropathy groups: none (0–2), mild (3–5), moderate (6–8), and severe (9–10). A neuropathy disability score ‡ 6 was used to define those at higher risk of foot ulceration. Multivariable regression analysis was performed to assess the effect of neuropathy disability scores, age, disease duration and retinopathy on RNFL thickness.

Results
Inferior (but not global or other sectoral) retinal nerve fibre layer thinning was associated with higher neuropathy disability scores (P = 0.03). The retinal nerve fibre layer was significantly thinner for the group with neuropathy disability scores ‡ 6 in the inferior quadrant (P < 0.005). Age, duration of disease and retinopathy levels did not significantly influence retinal nerve fibre layer thickness. Control participants did not show any significant differences in thickness measurements from the group with diabetes and no neuropathy (P > 0.24 for global and all sectors).

Conclusions
Inferior quadrant retinal nerve fibre layer thinning is associated with peripheral neuropathy in patients with Type 2 diabetes, and is more pronounced in those at higher risk of foot ulceration.

Gel electrolytes based on lithium macro-anion salt

Montmorillonites are composed of aluminosilicate layers stacked one above the other, and the layer thickness is approximately 1 nm. In this work lithium modified montmorillonite (Li-MMT) was prepared and used as a lithium macro-anion salt in gel electrolytes. It was found that Li-MMT exhibited good compatibility with poly(ethylene glycol), DMSO and the ionic liquid, 1-ethyl-3-methylimidazolium dicyanamide (EMIdca), and a few of novel gel electrolytes based on Li-MMT were obtained. These gel electrolytes were investigated by X-ray powder diffraction, solid state NMR, conductivity measurements and cyclic voltammetry. High conductivities up to 10^{− 4} to 10^{− 3} S/cm at room temperature were observed with these macro-anion gel electrolytes. These gel materials were promising to be used as lithium conductive electrolytes in electrochemical devices, such as lithium batteries.

Dielectric screening in atomically thin boron nitride nanosheets

Two-dimensional (2D) hexagonal boron nitride (BN) nanosheets are excellent dielectric substrate for graphene, molybdenum disulfide, and many other 2D nanomaterial-based electronic and photonic devices. To optimize the performance of these 2D devices, it is essential to understand the dielectric screening properties of BN nanosheets as a function of the thickness. Here, electric force microscopy along with theoretical calculations based on both state-of-the-art first-principles calculations with van der Waals interactions under consideration, and nonlinear Thomas-Fermi theory models are used to investigate the dielectric screening in high-quality BN nanosheets of different thicknesses. It is found that atomically thin BN nanosheets are less effective in electric field screening, but the screening capability of BN shows a relatively weak dependence on the layer thickness.

Directional water transport fabrics with durable ultra-high one-way transport capacity

Fabrics with automatic one-way water transport ability are highly desirable for applications in daily life, industry, health, and defense. However, most of the studies on one-way water transport fabrics only report the qualitative water transport results. The lack of quantitative measure makes it hard to assess the directional transport quality. Here, it is proved that a hydrophilic fabric after being electrosprayed with a thin layer of hydrophobic coating on one side shows one-way water transport ability. By using moisture management tester, the water transport property is qualitatively characterized and the effect of hydrophobic fabric layer thickness on one-way water transport feature is examined. The hydrophobic fabric layer thickness is found to play a key role in deciding the one-way transport ability. When a plain woven fabric with an overall thickness of 420 μm and average pore size of 33 μm is used as fabric substrate, a hydrophobic fabric layer thickness between 22 and 62 μm allows the treated fabric to show a one-way droplet transport feature. A one-way transport index as high as 861 can be attained. The one-way water transport is durable enough to withstand repeated washing. This novel fabric may be useful for development of “smart” textiles for various applications.

Possible electrical double-layer contribution to the equilibrium thickness of intergranular Glass films in polycrystalline ceramics

The plausibility of the entropic repulsion of electrical double layers acting to stabilize an equilibrium thickness of intergranular glass films in polycrystalline ceramics is explored. Estimates of the screening length, surface potential, and surface charge required to provide a repulsive force sufficiently large to balance the attractive van der Waals and capillary forces for observable thicknesses of intergranular film are calculated and do not appear to be beyond possibility. However, it has yet to be established whether crystalline particles in a liquid-phase sintering medium possess an electrical double layer at high temperatures. If they do, such a surface charge layer may well have important consequences not only for liquid-phase sintering but also for high-frequency electrical properties and microwave sintering of ceramics containing a liquid phase.

Diffusion layer parameters influencing optimal fuel cell performance

The performance of polymer electrolyte fuel cells (PEFCs) is substantially influenced by the morphology of the gas diffusion layer. Cells utilising sintered gas diffusion layers made with a low pore volume Acetylene Black carbon, at an optimised thickness, showed better performance compared with cells containing Vulcan XC-72R carbon. The cells were optimised using both oxygen and air as oxidants showing that different conditions were required in each case to achieve optimum cell performance. A model, in which the hydrophobicity and porosity of the diffusion layer affect water impregnation and gas diffusion through the gas diffusion layer, is presented to explain the influence of the diffusion layer morphology on cell performance.

Measurement of aqueous film thickness between charged mercury and mica surfaces : a direct experimental probe of the Poisson-Boltzmann distribution

A stable aqueous electrolyte film is formed between a mercury drop and a flat mica surface due to electrical double-layer repulsion when a negative potential is applied to the mercury. Film thickness has been measured as a function of applied potential while keeping the film pressure constant. By making measurements in this way, it is possible to map the data directly according to the Poisson-Boltzmann equation. An excellent fit to the data is obtained, providing direct evidence for this classical equation and its use as the basis of the Gouy-Chapman model of the diffuse double layer in electrolyte solutions.

Analytic solution for the three-layer multiple beam interferometer

We present a simple analytic solution for the condition of constructive interference for light transmitted through an interferometer incorporating three ideally transparent layers of arbitrary thickness and refractive index. We also consider the effect of adding two metallic coatings to the outer surfaces of the interferometer and give empirical expressions for the associated phase changes for silver coatings on silica, sapphire, and mica substrates. A particular application to fringes of equal chromatic order can be utilized to obtain precise measurements of the thickness of extremely thin films sandwiched between two substrates.

Dynamics of interactions involving deformable drops : hydrodynamic dimpling under attractive and repulsive electrical double layer interactions

A model developed previously to analyze force measurements between two deformable droplets in the atomic force microscope [Langmuir 2005, 21, 2912-2922] is used to model the drainage of an aqueous film between a mica plate and a deformable mercury drop for both repulsive and attractive electrical double-layer interactions between the mica and the mercury. The predictions of the model are compared with previously published data [Faraday Discuss. 2003, 123, 193-206] on the evolution of the aqueous film whose thickness has been measured with subnanometer precision. Excellent agreement is found between theoretical results and experimental data. This supports the assumptions made in the model which include no-slip boundary conditions at both interfaces. Furthermore, the successful fit attests to the utility of the model as a tool to explore details of the drainage mechanisms of nanometer-thick films in which fluid flow, surface deformations, and colloidal forces are all involved. One interesting result is that the model can predict the time at which the aqueous film collapses when attractive mica-mercury forces are present without the need to invoke capillary waves or other local instabilities of the mercury/electrolyte interface.

Wear behaviour of pure Ti with a nanocrystalline surface layer

A nanocrystalline (NC) layer with the thickness of 30 µm was produced on pure titanium surface by surface mechanical attrition treatment (SMAT). Microstructure observation indicated that the grain size increases with depth from the treated surface. The friction coefficient decreases and the wear resistance increases with the SMAT sample as compared to its coarse-grained counterpart. The improvement of the wear properties could be attributed to the higher hardness of SMAT sample.