The impact of grazing by eastern grey kangaroos (macropus giganteus) on vegetation recovery after fire at Reef Hills regional park, Victoria

In southeastern Australia ecological burning is frequently used to maintain a number of plant and animal populations. However, many of these prescribed fires are small, and may focus intense grazing activity on new regrowth. At Reef Hills Regional Park, Victoria shrub species have senesced, presumably due to the absence of fire. Ecological burning may be necessary to promote regeneration, however, the population density of the Eastern Grey Kangaroo (Macropus giganteus) is high (approx 38 per km2), and grazing pressure presents a significant risk to postfire vegetation recovery. An assessment of grazing patterns and their effects on postfire recovery was carried out at Reef Hills Regional Park through grazing exclusion plots. Preferential grazing by Eastern Grey Kangaroos occurred on small burnt plots compared to adjacent unburnt areas as determined by faecal pellet counts. On burnt areas, there was a significant reduction in shrub diversity on grazed plots compared to ungrazed plots. Most observations of kangaroos were of animals grazing on farmland surrounding the Park, and it is likely that any burning might shift grazing from farmland to burnt areas when new growth occurs. This needs to be considered before any ecological burn plan is applied to manage vegetation communities, particularly if the plan requires small areas to be burnt. We recommended that a large area up to 200 ha area be burnt and monitored to determine whether burning larger areas disperses grazing pressure from macropods to a level where impacts on vegetation are reduced and localized plant extinctions do not occur.

Applying external solutions to organizational development : elearning as a platform for internal growth

Innovations in technology have facilitated eLearning process development, bringing significant impact into education. eLearning is not simply putting study materials online on the Web, nor is it a substitute for traditional classroom teaching (KPMG, 2002). Businesses worldwide have been using eLearning as a facilitator in organisational development through knowledge sharing, especially in the area of web based training and project management. eLearning has also become a large area of potential business for many organisations. In this study, we explore how eLearning has helped an organisation based in India – Tata Interactive Systems (part of TATA conglomerate), which provides eLearning solutions for businesses locally and globally. In this single case study, we explored how the organisation has not only utilised eLearning as an internal development process, but also successfully converted this learning into business opportunities for itself. To study the development process, we have applied the process theories of Van De Ven and Poole (1995).

Flux-assisted self-assembly of monodisperse colloids

We have developed a novel method to grow ordered layers of monodisperse colloids on a flat substrate. The evaporation of the colloidal suspension in the presence of the inclined substrate is strengthened by an external gas flux directed on the meniscus. The meniscus oscillations caused by the gas flux have an evident effect on the ordering of the spheres on the substrate. Thick films (more than 150 layers in a single-step deposition) of large area single crystals (1 cm2) can be obtained in a very short time (~1 cm/h maximum growth rate) and from very diluted suspensions (up to 0.022% volume fraction).

Solar energy use for energy savings in dairy processing plants

New Zealand is one of the world’s largest producers of dairy products and has a climate with high levels of solar radiation; however, the use of solar energy in the dairy processing industry has received limited attention. An examination of historical records found that the annual peak in New Zealand milk production and processing occurs at a time when solar radiation levels are increasing markedly. An F-Chart analysis was used to simulate the performance of large-area arrays of solar collectors and to determine their suitability for heating and cooling in a dairy processing environment. For the study four types of solar collectors were analysed: glazed flat plates, evacuated tubes, evacuated tubes with CPC reflectors and a building-integrated solar collector under development at the University of Waikato (UoW). It was found that of these echnologies, both flat plate and evacuated tubes with CPC reflectors could make useful heating and cooling contributions. Furthermore, the solar fraction was determined mainly by the collector area to storage volume ratio. Finally, it was found that the UoW building-integrated solar collector could make a significant contribution to energy use in dairies and may be an attractive future technology for the industry.

Designing a low cost solar collector system for process industry applications

New Zealand is a large producer and processor of primary products and has a climate with high levels of solar radiation. However, the use of solar energy for heating and cooling in the processing industries has received limited attention.
For this study, the design of a low cost solar collector is analysed and discussed. Furthermore, the methods for integrating the collector into water heating and cooling systems in a hypothetical processing environment are examined. An F-Chart analysis is used to simulate the performance of large-area arrays of the solar collector and to determine its potential contribution to heating and cooling loads.
The study shows that for a storage-based system, the contribution of solar energy is determined mainly by the collector area to storage volume ratio. It is suggested that this low cost collector could make a significant contribution to energy use in processing plants and may be an attractive future technology.

Polymer electrolytes for electrochromic window applications

Polymer electrolytes suitable for use in electrochromic window devices for architectural applications have been developed. The electrolyte properties required for a large area, long lifetime, long cycle life and wide temperature range application such as this place some restrictions on the type of polymer system required. The electrolytes developed in this work are based on LiClO₄ in a polyether copolymer which is cured in place to produce a clear elastomer. The material properties and conductivity of electrolytes with and without the plasticizers are presented. Electrochromic device performance tests show that the electrolyte impedance is a factor in the device performance, but not the limiting factor.

Discovery of early paleozoic strata in south of Qiangtang, Northern Tibet and its significance

Due to the lack of fossil evidence, the age of Amugang Group, previously referring to the large area of metamorphic formations developed along the south of Longmucuo-Shuanghu suture in southern Qiangtang area, northern Tibet, has been under heated debate. Some geologists were convinced that the age of metamorphic formations was of Pre-Devonian according to the emergence of nonmetamorphic fossil-beating Devonian in Chasang area, north of the suture. Most geologists believed that its age was of Pre-Sinian. From 2003 to 2004, we collected a large amount of Nautiloid and Graptolite fossils in upper metamorphic formations of Mayigangri area and determined the age to be middle and Late Ordovician-Silurian. It is the first time to discover the Early Paleozoic strata based on reliable fossils, which not only provides evidence to its age ascription, classification of the strata and its correlation to adjacent areas but also offers data to lithofacies, palaeogeography and tectonic pattern of studied area.

Synthesis and characterization of hexagonal and truncated hexagonal shaped MoO3 nanoplates

Hexagonal and truncated hexagonal shaped MoO₃ nanoplates (MoO₃ HNP) were synthesized through a simple vapor-deposition method in Ar atmosphere under ambient pressure without the assistant of any catalysts. The structure and morphology of MoO₃ HNP were investigated by XRD, EDX, SEM, TEM, and HRTEM. The results reveal that the HNP are α-MoO₃ and have a large area surface. The Raman spectrum shows a significant size effect on the vibrational property of MoO₃ HNP. The photoluminescence (PL) spectrum was carried out, and two peaks at 351 and 410 nm were observed in the spectrum. In addition, a possible growth mechanism proposed as VS is discussed in detail.

General synthesis of two-dimensional patterned conducting polymer-nanobowl sheet via chemical polymerization

A general method for the generation of two-dimensional (2D) ordered, large-area, and liftable conducting polymer-nanobowl sheet has been demonstrated via chemical polymerization for the first time. The sheet is made using the monolayer self-assembled from polystyrene (PS) spheres at the aqueous/air interface as template, followed by depositing conducting polymer on the part of PS monolayer submerging in the aqueous phase via chemical polymerization, and core extraction. During the process of polymerization, no substrate is required, which caused the as-prepared patterned conducting polymer sheet can be easily lifted-off and deposited, in full size, on any flat substrate. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Fourier transform infrared (FTIR) spectrum were used to characterize the products

A highly conductive porous graphene electrode prepared via in situ reduction of graphene oxide using Cu nanoparticles for the fabrication of high performance supercapacitors

Herein, a new graphene/Cu nanoparticle composite was prepared via the in situ reduction of GO in the presence of Cu nanoparticles which was then utilized as a sacrificing template for the formation of flexible and porous graphene capacitor electrodes by the dissolution of the intercalated Cu nanoparticle in a mixed solution of FeCl3 and HCl. The porous RGO electrode was characterized by atomic force microscopy (AFM), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS) and thermogravimetric analysis (TGA). The as-prepared graphene/Cu nanoparticle composite and the pure graphene film after removal of Cu nanoparticles possessed high conductivity of 3.1 × 10³ S m^-1 and 436 S m^-1 respectively. The porous RGO can be used as the electrode for the fabrication of supercapacitors with high gravimetric specific capacitances up to 146 F g^-1, good rate capability and satisfactory electrochemical stability. This environmentally friendly and efficient approach to fabricating porous graphene nanostructures could have enormous potential applications in the field of energy storage and nanotechnology.

A method for comprehensively assessing economic trade-offs of new irrigation developments

To meet the anticipated increase in global demand for food and fibre products, large areas of land around the world are being cleared and infrastructure constructed to enable irrigation, referred to herein as ‘greenfield irrigation’. One of the challenges in assessing the profitability of a greenfield irrigation development is understanding the impact of variability in climate and water availability and the trade-offs with scheme size, cost and the sensitivity of crop yield to water stress. For example, is it more profitable to irrigate a small area of land most years or a large area once every few years? And, is it more profitable to partially or fully water the crop? This paper presents a new method for efficiently linking a river system model and an agricultural production model to explore the financial trade-offs of different management choices, thereby enabling the optimal scheme area and most appropriate level of farmer risk to be identified. The method is demonstrated for a hypothetical but plausible greenfield irrigation development based around a large dam in the Flinders catchment, northern Australia. It was found that a dam and irrigation development paid for and operated by the same entity is not, under the conditions examined in this analysis, economically sustainable. The method could also be used to explore the impact of different management strategies on the agricultural production and profitability of existing irrigation schemes within a whole of river system context.

The role and contribution of private land in Victoria to biodiversity conservation and the protected area system

The distribution and attributes of properties involved in three major programs for biodiversity protection on private land in Victoria, Australia, was investigated to determine their role in relation to the reserve system. Overlaying of dowsets in a geographic information system, with particular emphasis on property distribution in relation to bioregional and population centres, was undertaken. Land for Wildlife agreements had greater numbers of properties and total area protected in all bioregions throughout the State, yet average protected area sizes were lower than those of conservation covenants and Trust for Nature reserves. A combination of large bioregional area and human population size tended to attract more private conservation properties and, to a lesser extent, the total area they protected. The potential contribution that such properties made to biodiversity conservation varied between bioregions. Inclusion of properties within a national reserve framework is proposed to improve the coordination and effectiveness of conservation measures.

Complaint behaviour: a study of the differences between complainants about advertising in Australia and the population at large

Advertising expenditure has risen globally and in Australia there has been a 2.7-fold increase in the last ten years. It is suggested that some advertisements may be “unacceptable”, that is, unfair, misleading, deceptive, offensive, false or socially irresponsible. This research is concerned with consumer behaviour and consumer complaint behaviour specifically in the area of advertising in Australia. The findings indicate that complainants are significantly different from the population at large. This research will afford the regulatory bodies a better understanding of the complaining public as well as educating marketing communications strategists in effectively reaching their target markets.

Proposal of a tiered conceptual framework for sustainable design and planning of large-scale development projects in the metropolitan context

The overwhelming threat posed by climate change means that increasingly, emphasis is being placed on the need to integrate sustainability considerations into all areas of policy making, planning and development. Actors in the built environment are progressively considering environmental and social issues alongside functional and economic aspects of development projects. However, to date in Australia and internationally, there have been few practical examples of integrated applications of sustainability principles in the built environment across design, planning, construction, operation and de-construction phases. Notable initiatives have tended to be narrow in scope, focusing on either mitigation or adaptation strategies. Integrated considerations of impacts from component and building scales to city and regional scales and across physical and socio-economic dimensions are urgently needed, particularly for long-life major infrastructure projects. This paper proposes a conceptual framework based on the principal that early intervention is the most cost-effective and efficient means of implementing effective strategies for mitigation and adaptation. A Strategic Environmental Assessment (SEA) approach is forwarded as an umbrella analytical framework, assembled from analytical methods which are strategically ‘tiered’ to inform different stages of the planning and decision-making process. Techniques such as Ecological footprint, Life cycle costing and Risk analysis may be applied to integrate sustainable design, construction and planning considerations which address both mitigation and adaptation dimensions, results of each analysis ultimately being collated into the overall SEA. This integrated conceptual framework for sustainable, resilient and cost-effective infrastructure development will in practice be applied to assess selected case-studies of major development projects in Australia, focusing on the area of stadium development. Practically applied and timed accordingly, the framework would allow assessments to be targeted towards appropriate decision making levels and enable better decision-making and more efficient resource allocation for major infrastructure development projects.