Continuity and change at C.B.C. : an ethnography of a Catholic Brothers School in Australian society

This thesis is an ethnographic investigation of a Catholic Brothers school, Christian Brothers College (C.B.C.), in the provincial city of Newburyport, Australia* The study explores the traditions and historical purposes of education at the independent, religious school, and examines the manner in which these have changed or are changing. All names, including the name of the school and the city, have been altered to preserve anonymity. The opening section discusses the emergence of the theoretical problem of the dialectic of change and continuity in the ongoing activity of C.B.C. actors. This is followed by an argument that an understanding of such activity requires an ethnographic perspective. Such a perspective, however, must not overlook the organisational and structural constraints within which participants operate. Hence, a critical ethnography, which takes account of both the agency of human actors and the structures which influence their activity, is advocated as the most suitable approach for understanding continuity and change within a complex organisation in its social context. This argument is followed by an ethnographic account of Christian Brothers College, which focuses on the perceptions and activities of teachers and administrators, Individual chapters deal with the Christian Brothers Order and its educational mission at C.B.C.; the nature of religious education at the school; the administration of the school; approaches to control and discipline; the curriculum and evaluation of pupils; and the relationship between C.B.C. and the wider Newburyport community. The concluding section integrates an analysis of continuity and change at C.B.C. with a discussion of theoretical perspectives on reproduction and transformation. The thesis concludes that, although change has occurred in many ways, an institutionalised image of C.B.C. as 'Brothers’ school'persists and impedes the formation of more democratic authority relations, curriculum, and evaluation. The potential for such change, however, is seen most strongly in the ongoing reform of religious education.

Low-temperature compaction of Ti-6Al-4V powder using equal channel angular extrusion with back pressure

Equal channel angular extrusion (ECAE), with simultaneous application of back pressure, has been applied to the consolidation of 10 mm diameter billets of pre-alloyed, hydride-dehydride Ti-6Al-4V powder at temperatures ≤400 °C. The upper limit to processing temperature was chosen to minimise the potential for contamination with gaseous constituents potentially harmful to properties of consolidated product. It has been demonstrated that the application of ECAE with imposed hydrostatic pressure permits consolidation to in excess of 96% relative density at temperatures in the range 100-400 °C, and in excess of 98% at 400 °C with applied back pressure ≥175 MPa. ECAE compaction at 20 °C (back pressure = 262 MPa) produced billet with 95.6% relative density, but minimal green strength. At an extrusion temperature of 400 °C, the relative density increased to 98.3%, for similar processing conditions, and the green strength increased to a maximum 750 MPa. The relative density of compacts produced at 400 °C increased from 96.8 to 98.6% with increase in applied back pressure from 20 to 480 MPa, while Vickers hardness increased from 360 to 412 HV. The key to the effective low-temperature compaction achieved is the severe shear deformation experienced during ECAE, combined with the superimposed hydrostatic pressure.

Efficient formal synthesis of (±)-hyphodermin B

An efficient formal synthesis of hyphodermin B 1, a metabolite of Hyphoderma radula, has been completed in 15% overall yield. The tricyclic carbon skeleton 3 was rapidly assembled from a novel vinyl enone via a Diels−Alder reaction, followed by dehydrogenation and anhydride formation. Selective reduction of anhydride 3 with LiAlH(t-BuO)3 gave hyphodermin B 1 in 99% yield. The structure of hyphodermin B 1 was confirmed by X-ray crystallographic analysis. The anhydride 3, bearing a γ-carbonyl group, displayed unexpected reactivity with the anhydride carbonyl closest to the γ-ketone being the most electrophilic site. This was confirmed by HF/6-31G* calculations. In the presence of base, 3 underwent a rearrangement to the novel lactone 16.

Proceedings of the rank forum on vitamin D

The Rank Forum on Vitamin D was held on 2nd and 3rd July 2009 at the University of Surrey, Guildford, UK. The workshop consisted of a series of scene-setting presentations to address the current issues and challenges concerning vitamin D and health, and included an open discussion focusing on the identification of the concentrations of serum 25-hydroxyvitamin D (25(OH)D) (a marker of vitamin D status) that may be regarded as optimal, and the implications this process may have in the setting of future dietary reference values for vitamin D in the UK. The Forum was in agreement with the fact that it is desirable for all of the population to have a serum 25(OH)D concentration above 25 nmol/l, but it discussed some uncertainty about the strength of evidence for the need to aim for substantially higher concentrations (25(OH)D concentrations>75 nmol/l). Any discussion of ‘optimal’ concentration of serum 25(OH)D needs to define ‘optimal’ with care since it is important to consider the normal distribution of requirements and the vitamin D needs for a wide range of outcomes. Current UK reference values concentrate on the requirements of particular subgroups of the population; this differs from the approaches used in other European countries where a wider range of age groups tend to be covered. With the re-emergence of rickets and the public health burden of low vitamin D status being already apparent, there is a need for urgent action from policy makers and risk managers. The Forum highlighted concerns regarding the failure of implementation of existing strategies in the UK for achieving current vitamin D recommendations.

Seasonal periodicity of serum vitamin D and parathyroid hormone, bone resorption, and fractures : the Geelong Osteoporosis Study

In this population-based study, seasonal periodicity was seen with reduced serum vitamin D, increased serum PTH, and increased bone resorption in winter. This was associated with an increased proportion of falls resulting in fracture and an increased risk of wrist and hip fractures.

Introduction: In a population of women who reside in a temperate climate and do not generally receive dietary vitamin D supplementation, we investigated whether seasonal vitamin D insufficiency is associated with increased risk of fracture.

Materials and Methods: An observational, cross-sectional, population-based study set in southeastern Australia (latitude 38–39° S). Participants were drawn from a well-defined community of 27,203 women ≥55 years old: 287 randomly selected from electoral rolls, 1635 with incident fractures, and 1358 presenting to a university hospital with falls. The main outcome measures were annual periodicities of ultraviolet radiation, serum 25-hydroxyvitamin D [25(OH)D], serum parathyroid hormone (PTH), serum C-telopeptide (CTx), BMD, falls, and fractures.

Results: Cyclic variations in serum 25(OH)D lagged 1 month behind ultraviolet radiation, peaking in summer and dipping in winter (p < 0.001). Periodicity of serum PTH was the inverse of serum 25(OH)D, with a phase shift delay of 1 month (p = 0.004). Peak serum CTx lagged peak serum PTH by 1&ndash;2 months. In late winter, a greater proportion of falls resulted in fracture (p < 0.001). Seasonal periodicity in 439 hip and 307 wrist fractures also followed a simple harmonic model (p = 0.078 and 0.002, respectively), peaking 1.5&ndash;3 months after the trough in 25(OH)D.

Conclusions: A fall in 25(OH)D in winter is accompanied by increases in (1) PTH levels, (2) bone resorption, (3) the proportion of falls resulting in fracture, and (4) the frequency of hip and wrist fracture. Whether vitamin D supplementation in winter can reduce the population burden of fractures requires further investigation.

Grain boundary segregation in Fe-Mn-C twinning-induced plasticity steels studied by correlative electron backscatter diffraction and atom probe tomography

We report on the characterization of grain boundary (GB) segregation in an Fe-28Mn-0.3C (wt.%) twinning-induced plasticity (TWIP) steel. After recrystallization of this steel for 24 h at 700 &deg;C, ∼50% general grain boundaries (GBs) and ∼35% Σ3 annealing twin boundaries were observed (others were high-order Σ and low-angle GBs). The segregation of B, C and P and traces of Si and Cu were detected at the general GB by atom probe tomography (APT) and quantified using ladder diagrams. In the case of the Σ3 coherent annealing twin, it was necessary to first locate the position of the boundary by density analysis of the atom probe data, then small amounts of B, Si and P segregation and, surprisingly, depletion of C were detected. The concentration of Mn was constant across the interface for both boundary types. The depletion of C at the annealing twin is explained by a local change in the stacking sequence at the boundary, creating a local hexagonal close-packed structure with low C solubility. This finding raises the question of whether segregation/depletion also occurs at Σ3 deformation twin boundaries in high-Mn TWIP steels. Consequently, a previously published APT dataset of the Fe-22Mn-0.6C alloy system, containing a high density of deformation twins due to 30% tensile deformation at room temperature, was reinvestigated using the same analysis routine as for the annealing twin. Although crystallographically identical to the annealing twin, no evidence of segregation or depletion was found at the deformation twins, owing to the lack of mobility of solutes during twin formation at room temperature.

Fetuin B is a secreted hepatocyte factor linking steatosis to impaired glucose metabolism

 Liver steatosis is associated with the development of insulin resistance and the pathogenesis of type 2 diabetes. We tested the hypothesis that protein signals originating from steatotic hepatocytes communicate with other cells to modulate metabolic phenotypes. We show that the secreted factors from steatotic hepatocytes induce pro-inflammatory signaling and insulin resistance in cultured cells. Next, we identified 168 hepatokines, of which 32 were differentially secreted in steatotic versus non-steatotic hepatocytes. Targeted analysis showed that fetuin B was increased in humans with liver steatosis and patients with type 2 diabetes. Fetuin B impaired insulin action in myotubes and hepatocytes and caused glucose intolerance in mice. Silencing of fetuin B in obese mice improved glucose tolerance. We conclude that the protein secretory profile of hepatocytes is altered with steatosis and is linked to inflammation and insulin resistance. Therefore, preventing steatosis may limit the development of dysregulated glucose metabolism in settings of overnutrition. Meex et al. use proteomic approaches to identify steatosis as a factor that changes protein secretion in hepatocytes. Secreted factors from steatotic hepatocytes caused insulin resistance and inflammation. One secreted protein, fetuin B, was identified as a hepatokine that is increased in type 2 diabetes and causes impaired glucose metabolism.

Microstructure and hardness characterisation of laser coatings produced with a mixture of AISI 420 stainless steel and Fe-C-Cr-Nb-B-Mo steel alloy powders

Fe-C-Cr-Nb-B-Mo alloy powder and AISI 420 SS powder are deposited using laser cladding to increase the hardness for wear resistant applications. Mixtures from 0 to 100 wt.% were evaluated to understand the effect on the elemental composition, microstructure, phases, and microhardness. The mixture of carbon, boron and niobium in the Fe-C-Cr-Nb-B-Mo alloy powder introduces complex carbides into a Fe-based matrix of AISI 420 SS which increases its hardness. Hardness increased linearly with increasing Fe-C-Cr-Nb-B-Mo alloy, but substantial micro-cracking was observed in the clad layer at additions of 60 wt.% and above; related to a transition from a hypoeutectic alloy containing α-Fe/α' dendrites with an (Fe,Cr)2B and γ-Fe eutectic to primary and continuous carbo-borides M2B (where M represents Fe and Cr) and M23(B,C)6 carbides (where M represents Fe, Cr, Mo) with MC particles (where M represents Nb and Mo). The highest average hardness, for an alloy without micro-cracking, of 952 HV was observed in a 40 wt.% alloy. High stress abrasive scratch testing was conducted on all alloys at various loads (500, 1500, 2500 N). Alloy content was found to have a strong effect on the wear mode and the abrasive wear rate, and the presence of micro-cracks was detrimental to abrasive wear resistance.