93 resultados para InxGa1-xAs self-assembly
em Deakin Research Online - Australia
Resumo:
Three conformationally preorganised host molecules based on the [3]polynorbornyl framework and incorporating di-urea receptors were synthesised and their interaction with a series of anions investigated by 1H NMR spectroscopy. A high affinity of each host molecule for dihydrogenphosphate (H2PO4–) and dihydrogenpyrophosphate (H2P2O72–) was identified. In addition to binding to the urea receptors of the host molecules, evidence for an interaction involving the non-polar C–H groups within the binding cavity of the framework and guest anions was also discovered. Furthermore, an unusual 2 : 1 host-to-anion stoichiometry was indicated when binding H2P2O72–, and a model for the anion-mediated self-assembly of this complex species is proposed.
Resumo:
We have developed a novel method to grow ordered layers of monodisperse colloids on a flat substrate. The evaporation of the colloidal suspension in the presence of the inclined substrate is strengthened by an external gas flux directed on the meniscus. The meniscus oscillations caused by the gas flux have an evident effect on the ordering of the spheres on the substrate. Thick films (more than 150 layers in a single-step deposition) of large area single crystals (1 cm2) can be obtained in a very short time (~1 cm/h maximum growth rate) and from very diluted suspensions (up to 0.022% volume fraction).
Resumo:
We have demonstrated that the surface wettability of negatively charged polyimide films could be turned by electrostatic self-assembly of ionic liquids. The water contact angles of the polyimide films varied in the range 27-80 degrees for 13 different ionic liquids based on imidazolium and ammonium salts. The surface morphology of the resulting surfaces was characterized using atomic force microscopy. The results revealed that the assembly of longer-substituent cations was characterized by the formation of spherical nanoparticles that were formed due to sequent aggregation of cations on those electrostatically assembled ones via hydrophobic interaction. In this case, the counteranions are present in the assembled layers and the wettability is accordingly affected. Whereas for shorter-substituent cations, no aggregates were formed due to the less hydrophobic interaction than the electrostatic repulsive interaction between the cations, and the counteranions were absent from the assembled layers. This method can also be utilized to quantify the hydrophobicity of various ionic liquids.
Resumo:
Self-Assembly Monolayer (SAM) technique, as a novel and developing technique for fabricating layer-by-layer nanofilm on substrates of various sizes, shapes and materials, has received more and more attention in the areas of light-emitting devices, nonlinear optical materials, conductive films, permselective gas membranes, sensors, modification of electrodes, resistance and printing technique. In comparison with other traditional methods, SAM technique has many significant advantages, including simple process, universality, formation with densely packed, well defined, highly ordered surfaces. This paper will give a review on the recent development in SAM technique.
Resumo:
The self-assembling behavior of a single-chain quaternary ammonium amphiphile bearing azobenzene (C12AzoC6N+) on freshly cleaved mica sheet has been investigated by atomic force microscopy (AFM) method. Confocal microscopic Raman spectra confirm the adsorption of the self-assembled monolayer structure. Ex-situ AFM reveals that C12AzoC6N+ forms branch-like stripes indicating the fusion and reorganization of the micelles during drying in air as the in-situ AFM has revealed that surfactant forms spherical micelles on the mica surface. The nano-sized surface structure is strongly dependent on the change of molecular structure, which resulted from photo-induced isomerization. The nano-sized stripe is quite stable even being annealed at 90 °C for 4 h.
Resumo:
Blends of poly(2-vinyl pyridine)-block-poly(methyl methacrylate) (P2VP-b-PMMA) and poly(hydroxyether of bisphenol A) (phenoxy) were prepared by solvent casting from chloroform solution. The specific interactions, phase behavior and nanostructure morphologies of these blends were investigated by Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), dynamic light scattering (DLS), atomic force microscopy (AFM), and transmission electron microscopy (TEM). In this block copolymer/homopolymer blend system, it is established that competitive hydrogen bonding exists as both blocks of the P2VP-b-PMMA are capable of forming intermolecular hydrogen bonds with phenoxy. It was observed that the interaction between phenoxy and P2VP is stronger than that between phenoxy and PMMA. This imbalance in the intermolecular interactions and the repulsions between the two blocks of the diblock copolymer lead to a variety of phase morphologies. At low phenoxy concentration, spherical micelles are observed. As the concentration increases, PMMA begins to interact with phenoxy, leading to the changes of morphology from spherical to wormlike micelles and finally forms a homogenous system. A model is proposed to describe the self-assembled nanostructures of the P2VP-b-PMMA/phenoxy blends, and the competitive hydrogen bonding is responsible for the morphological changes.
Resumo:
We report a novel approach for the assembly of one-dimensional hybrid nanostructures that consist of gold nanowires with ultrahigh aspect ratios (L/d > 500) self-assembled along the axes of multiwalled carbon nanotubes. The micrometer-long hybrid nanowires exhibit high electrical conductivity and can be easily microcontact-printed onto various substrates in a patterned form, suggesting that these hybrids have considerable potential as interconnects for nanoelectronic applications.
Resumo:
Colistin is an amphiphilic antibiotic that has re-emerged into clinical use due to the increasing prevalence of difficult-to-treat Gram-negative infections. The existence of self-assembling colloids in solutions of colistin and its derivative prodrug, colistin methanesulfonate (CMS), was investigated. Colistin and CMS reduced the air−water interfacial tension, and dynamic light scattering (DLS) studies showed the existence of 2.07 ± 0.3 nm aggregates above 1.5 mM for colistin and of 1.98 ± 0.36 nm aggregates for CMS above 3.5 mM (mean ± SD). Above the respective critical micelle concentrations (CMC) the solubility of azithromycin, a hydrophobic antibiotic, increased approximately linearly with increasing surfactant concentration (5:1 mol ratio colistin:azithromycin), suggestive of hydrophobic domains within the micellar cores. Rapid conversion of CMS to colistin occurred below the CMC (60% over 48 h), while conversion above the CMC was less than 1%. The formation of colistin and CMS micelles demonstrated in this study is the proposed mechanism for solubilization of azithromycin and the concentration-dependent stability of CMS.
Resumo:
Substrate-induced coagulation (SIC) is a coating process based on self-assembly for coating different surfaces with fine particulate materials. The particles are dispersed in a suitable solvent and the stability of the dispersion is adjusted by additives. When a surface, pre-treated with a flocculant e.g. a polyelectrolyte, is dipped into the dispersion, it induces coagulation resulting in the deposition of the particles on the surface. A non-aqueous SIC process for carbon coating is presented, which can be performed in polar, aprotic solvents such as N-Methyl-2- pyrrolidinone (NMP). Polyvinylalcohol (PVA) is used to condition the surface of substrates such as mica, copperfoil, silicon-wafers and lithiumcobalt oxide powder, a cathode material used for Li-ion batteries. The subsequent SIC carbon coating produces uniform layers on the substrates and causes the conductivity of lithiumcobalt oxide to increase drastically, while retaining a high percentage of active battery material.
Resumo:
Block copolymer systems with hydrogen bonding interactions have received relatively little attention. Recently, we have investigated the self-assembly and phase separation in such block copolymer systems with an attempt to elucidate the role of hydrogen bonding interactions both theoretically and experimentally [1-4]. In A-b-B/C diblock copolymer/homopolymer systems, the phase behavior was theoretically analyzed according to the random phase approximation and correlated with hydrogen bonding interactions in terms of the difference in inter-association constants (K). To examine how the hydrogen bonding determines the self-assembly and morphological transitions in these systems, we have introduced the K values as a new variable into the phase diagram which we established for the first time (Fig. 1). Multiple vesicular morphologies were formed in aqueous solution of A-b-B/A-b-C diblock copolymer complexes of PS-b-PAA and PS-b-PEO. Interconnected compound vesicles (ICCVs) were observed for the first time as a new morphology (Fig. 2), along with other aggregated nanostructures including vesicles, multilamellar vesicles, thick-walled vesicles and irregular aggregates. Complexation of two amphiphilic diblock copolymers provides a viable approach to vesicles in aqueous media.
Resumo:
In the present work, nanostructured blends were prepared from double crystalline diblock copolymer poly(ɛ-caprolactone)-block-poly(ethylene oxide) and homopolymer poly(4-vinyl phenol) (PVPh). The diblock copolymer PEO-b-PCL consists of two immiscible crystallizable blocks wherein both PEO and PCL blocks can form hydrogen bonds with PVPh. In these A-b-B/C diblock copolymer/homopolymer blends, microphase separation takes place due to the disparity in intermolecular interactions; specifically, PVPh and PEO block interact strongly whereas PVPh and PCL block interact weakly. The TEM and SAXS results show that the cubic PEO-b-PCL diblock copolymer changes into ordered hexagonal cylindrical morphology upon addition of 20 wt % PVPh followed by disordered bicontinuous phase in the blend with 40 wt % PVPh and then to homogeneous phase at 60 wt % PVPh and above blends. Up to 40 wt % PVPh there is only weak interaction between PVPh and PCL due to the selective hydrogen bonding between PVPh and PEO. However, with higher PVPh concentration, the blends become homogeneous since a sufficient amount of PVPh is available to form hydrogen bonds with both PEO and PCL. A structural model was proposed to explain the self-assembly and microphase morphology of these blends based on the experimental results obtained. The formation of nanostructures and changes in morphologies depend on the relative strength of hydrogen bonding interaction between each block of the block copolymer and the homopolymer.
Resumo:
Block copolymers are of particular interest due to their ability to form a rich variety of nanostructures via self-assembly [1]. The self-assembly via competitive hydrogen bonding is a novel concept which is based on the competition between different blocks of the block copolymer to form more than one kind of intermolecular interaction with the complimentary polymer in the system. Recently, Guo and co-workers have proven that careful selection of the polymers specifically the block copolymer, and the experimental conditions can lead to self-assembled structures in blends and complexes exhibiting competitive hydrogen bonding [2-5].