Using national input-output data for embodied energy analysis of individual residential buildings

Embodied energy (EE) analysis has become an important area of energy research, in attempting to trace the direct and indirect energy requirements of products and services throughout their supply chain. Typically, input-output (I-O) models have been used to calculate EE because they are considered to be comprehensive in their analysis. However, a major deficiency of using I-O models is that they have inherent errors and therefore cannot be reliably applied to individual cases. Thus, there is a need for the ability to disaggregate an I-O model into its most important 'energy paths', for the purpose of integrating case-specific data. This paper presents a new hybrid method for conducting EE analyses for individual buildings, which retains the completeness of the I-O model. This new method is demonstrated by application to an Australian residential building. Only 52% of the energy paths derived from the I-O model were substituted using case-specific data. This indicates that previous system boundaries for EE studies of individual residential buildings are less than optimal. It is envisaged that the proposed method will provide construction professionals with more accurate and reliable data for conducting life cycle energy analysis of buildings. Furthermore, by analysing the unmodified energy paths, further data collection can be prioritized effectively.

Comparison of multifactor productivity indicators for real estate sectors using the OECD input-output database

"Research on the international comparison of productivity has gained significant interest throughout several previous decades. Relatively little work has however been done in the real estate sector. This paper aims to develop a new productivity measurement framework for the international comparison of the real estate sector based on the newly-published OECD input-output database. Three multifactor productivity indicators are formulated using the ratio of the sectoral final demand to value added, the intermediate output to intermediate input and the total output to total input effect respectively in the input-output table. Historical analyses and comparisons are also carried out to indicate the differences of productivities of the real estate sectors in seven selected countries. Findings can improve the understanding of how technological, organisational and policy influences combine to affect productivity growth and aid the policy makers, real estate agencies and researchers in evaluating the competitive ability of the real estate sector."

Validation of the use of input-output data for embodied energy analysis of the Australian construction industry

This paper evaluates a recently developed hybrid method for the embodied energy analysis of the Australian construction industry. It was found that the truncation associated with process analysis can be up to 80%, whilst the use of input-output analysis alone does not always provide a perfect model for replacing process data. There is also a considerable lack in the quantity and possibly quality of process data currently available. These findings suggest that current best-practice methods are sufficiently accurate for most typical applications, but this is heavily dependant upon data quality and availability. The hybrid method evaluated can be used for the optimisation of embodied energy and for identifying opportunities for improvements in energy efficiency.

Economic indicator comparisons of international real estate sectors using the OECD input-output database

With its growing share in national economies, the real estate sector has been considered a vital contributor of economic development. Research efforts are needed in order to gain a better comprehension of the national specificities of the real estate sector and to identify its role in economic development. Due to limited comparable data, the economic indicators of real estate sectors are hard to compare between different countries. This paper aims to explore the quantitative interdependence amongst the real estate sector and other industries in developed economies using input-output analysis, and to investigate their significant linkages. Based on the recently published Organisation for Economic Co-operation and Development (OECD) input-output database at constant prices, the analysis focuses on the real estate's escalating role in terms ofshares in gross output, value added and gross national product. With emphasis on the relative role of manufacturing, construction and services inputs, this paper also highlights the strengths of the push and pull of the real estate sector.

Economic performance analysis of the Australian property sector using input-output tables

The property sector has played an important role with its growing contribution in the national income and employment in the Australian economy. There is an increasing research need in measuring and analysing the economic performance of the Australian property sector at a country level and input-output tables are considered as an appropriate tool. This paper aims to analyse and measure the performance and sectoral linkages of the Australian property sector using the five latest input-output tables compiled by the Australian Bureau of Statistics. Findings suggested that the Australian residential property sector had played a more important role than the commercial sector in the economy. The backward linkage of the residential property sector showed a decreasing economic pull, while that of commercial property presented an upward pattern. Moreover. the Australian property sector showed a medium economic push to the national economy over the examined period. Findings can aid policy makers, the property sector and researchers in evaluating the competitive ability of the property sector in Australia.

Multifactor productivity measures of construction sectors using OECD input-output database

This research develops a new productivity measurement framework for the construction sector in the light of an input-output table. Three group multifactor productivity indicators are formulated based on the multiplier concepts in the input-output analysis. This measurement framework focuses on the intro-industry flows of products and considers the direct and indirect effects of input and output. Moreover, this framework enables us to measure the multifactor productivity of a specific sector systematically. Historical analyses and international comparisons are carried out to indicate the differences of the productivity of the construction sectors in seven selected countries, using the newly published OECD input-output database. Research findings are expected to clarify how technological, organizational and political factors affect the productivity growth, enabling the policy makers, construction businesses and researchers to quantify the competitive ability of the construction sector.

Validation of the use of Australian input-output data for building embodied energy simulation

Traditional!y, the simulation of buildings has focused 011 operational energy consumption in an attempt to determine the potential for energy savings. Whilst operational energy of Australian buildings accounts for around 20% of total energy consumption nationally, embodied energy represents 20 to 50 times the annual operational energy of 1110st Australian buildings. Lower values have been shown through a number of studies that have analysed the embodied energy of buildings and their products, however these have now shown to be incomplete in system boundary. Many of these studies have used traditional embodied energy analysis methods, such as process analysis and input-output analysis, Hybrid embodied energy analysis methods have been developed, but these need to be compared and validated. This paper reports on preliminary work on this topic. The findings so far suggest that current best-practice methods are sufficiently accurate for most typical applications, but this is heavily dependant upon data quality and availability.

An input-output table perspective on measuring construction productivity

In the field of construction economics, input-output analysis based studies' have attracted a lot of interest from the academics and researchers. The wide efforts are to carry out analyses and comparisons of economic indicators in construction sectors across countries and years. There has been little research modelling the construction productivity using input-output tables. This research takes advantage of the input-output analysis to develop a perspective for determining the productivity of an industrial sector. The developed quantitative formulas are fully based on the economic indicators generated from an input-output table. Using the newly published OECD input-output database, historical analyses and comparisons are carried out to indicate the differences of prod uctivi ties of the construction sectors in Australia and Japan.

E-government: a possible solution to the problems of the agricultural input market in Bangladesh?

Although e-government offers unique opportunities for streamlining good governance, there remains considerable skepticism about its applicability in developing countries due to their lack of required level of infrastructural, technological, legal and human development. This paper argues that developing countries can introduce e-government practices by re-engineering their existing infrastructure rather than waiting for massive investments and perfect technological advancements. Using Bangladesh- a developing country- as an exemplar, this paper assesses the applicability and prospects of e-government practices in dealing with the problems in the agricultural input sector which is predominantly associated with poor, marginalised and semi-illiterate farmers. The utilization of the Bangladesh case study has important implications for examining and highlighting the probable introduction of e-government practices in developing countries.

State and input simultaneous estimation for a class of nonlinear systems

This paper addresses the problem of estimating simultaneously the state and input of a class of nonlinear systems. Here, the systems nonlinear part comprises a Lipschitz nonlinear function with respect to the state and input, and a state-dependent unknown function including additive disturbance as well as uncertain/nonlinear/time-varying terms. Upon satisfying some conditions, the observer design problem can be solved via a Riccati inequality or a LMI-based technique with asymptotic estimation guaranteed. A numerical example is included for illustration.

Input usage, output mix and industry deregulation: an analysis of the Australian dairy manufacturing industry

In this paper we estimate a Translog output distance function for a balanced panel of state level data for the Australian dairy processing sector. We estimate a fixed effects specification employing Bayesian methods, with and without the imposition of monotonicity and curvature restrictions. Our results indicate that Tasmania and Victoria are the most technically efficient states with New South Wales being the least efficient. The imposition of theoretical restrictions marginally affects the results especially with respect to estimates of technical change and industry deregulation. Importantly, our bias estimates show changes in both input use and output mix that result from deregulation. Specifically, we find that deregulation has positively biased the production of butter, cheese and powders.

An input-output approach for measuring real estate sector linkages

This research aims to measure and compare the total, backward, forward, internal and sectoral linkages of the real estate sector using the hypothetical extraction method over 30 years and explore the role of this sector in national economies and the quantitative interdependence between the real estate sector and the remaining sectors from a new angle. Empirical results show an increasing trend of these linkages, which confirms the increasing role of the real estate sector with economic maturity over the examined period. On the other hand, the significant rank correlations in the linkages imply that the importance of real estate remained fairly stable among highly developed economies over the examined period. This may supply a tool to signal the maturity of an entire economy. Furthermore, the findings can aid both governments making relative policies and businesses choosing strategic partners and location strategies.

State and input simultaneous estimation for a class of time-delay systems with uncertainties

This brief addresses the problem of estimation of both the states and the unknown inputs of a class of systems that are subject to a time-varying delay in their state variables, to an unknown input, and also to an additive uncertain, nonlinear disturbance. Conditions are derived for the solvability of the design matrices of a reduced-order observer for state and input estimation, and for the stability of its dynamics. To improve computational efficiency, a delay-dependent asymptotic stability condition is then developed using the linear matrix inequality formulation. A design procedure is proposed and illustrated by a numerical example.

Improved support vector machine generalization using normalized input space

Data pre-processing always plays a key role in learning algorithm performance. In this research we consider data pre-processing by normalization for Support Vector Machines (SVMs). We examine the normalization affect across 112 classification problems with SVM using the rbf kernel. We observe a significant classification improvement due to normalization. Finally we suggest a rule based method to find when normalization is necessary for a specific classification problem. The best normalization method is also automatically selected by SVM itself.