Room temperature fast-ion conduction in imidazolium halide salts

Fast-ion conduction has been observed in the iodide and bromide salts of 1-methyl-3-ethylimidazolium at ambient temperatures. The melting point of these two compounds is above 350 K and even at 273 K the ionic conductivity in the solid-state is greater than 10⁻³S cm⁻¹. Cation diffusion coefficients have been measured using fringe field gradient and/or pulse field gradient ¹H NMR techniques, which indicated cation diffusion coefficients of the order of 10⁻¹⁰ m² s⁻¹ in the solid-state. Remarkably, these values are up to an order of magnitude higher than the cation diffusion coefficient in the supercooled liquid at 293 K. The activation energy for diffusion in the solid-state is extremely small, as is typical of solid-state fast-ion conductors and indicates a change in transport mechanism from the melt to the crystal. The inability to detect an ¹²⁷I signal together with the modelling of the conductivity using the Nernst–Einstein equation suggests that the solid-state conduction is primarily due to cation diffusion. The solid-state fast-ion conduction is most likely related to vacancy diffusion along the cation layers in the crystal. The temperature dependence of the NMR signal intensity indicates that the number of mobile species is increasing with increasing temperature with an activation energy of approximately 20–30 kJ mol⁻¹.

Weak intermolecular interactions in sulfonamide salts : structure of 1-ethyl-2-methyl-3-benzyl imidazolium bis[(trifluoromethyl)sulfonyl]amide

The crystal structure of a 1,2,3-trisubstituted imidazolium salt of the bis[(trifluoromethyl)sulfonyl)]amide ion is presented; this salt is a prototype for similar, room temperature liquid, imidazolium salts; the structure shows that the anion and cation interact weakly, with little if any hydrogen bonding present.

Water-soluble complexes of hydrophobically modified polymer and surface active imidazolium-based ionic liquids for enhancing oil recovery

The current study introduces the water-soluble complexes containing hydrophobically associating copolymer and a series of surface activity imidazolium-based ionic liquids (CnmimBr, n=6, 8, 10, 12, 14 and 16). The polymer, denoted as PAAD, was prepared with acrylamide (AM), acrylic acid (AA) and N,N-diallyl-2-dodecylbenzenesulfonamide (DBDAP). And the hydrophobic associative behavior of PAAD was studied by a combination of the pyrene fluorescence probe and viscosimetry. Incorporation of CnmimBr (n=10, 12, 14 and 16) in PAAD leaded to the white thick gel, while the pellucid solutions were obtained in complexes of PAAD and CnmimBr (n=6 and 8); addition of C6mimBr around critical micelle concentration resulted in a large decrease in viscosity of solution. Therefore, we particularly investigated the performance of PAAD/C8mimBr complex. The interfacial tension of PAAD/C8mimBr complex solution and crude oil under different conditions was examined. Moreover, PAAD/C8mimBr complex exhibited superior temperature resistance and shear reversible performance for enhancing oil recovery (EOR) by rheological test. The promising EOR of 21.65% can be obtained by PAAD/C8mimBr complex showing high potential to utilize this kind of new complex in EOR processes.

Rechargeable Zn/PEDOT battery with an imidazolium-based ionic liquid as the electrolyte

 A non-aqueous secondary battery has been constructed by using Zn metal as the anode and chemically synthesised PEDOT as the cathode, with a 1-ethyl-3-methylimidazolium dicyanamide ionic liquid as the electrolyte, which avoids dendritic growth processes on the Zn surface upon charge/discharge cycling. The novel Zn/PEDOT rechargeable cell shows high efficiency and cycling ability, performing over 320 cycles with no indication of short circuit. Both the Zn and PEDOT surfaces showed minimal signs of degradation, suggesting that a Zn/PEDOT electrochemical device would be capable of extended cycle life under numerous charge/discharge cycles.

Tunable wettability of polyimide films based on electrostatic self-assembly of ionic liquids

We have demonstrated that the surface wettability of negatively charged polyimide films could be turned by electrostatic self-assembly of ionic liquids. The water contact angles of the polyimide films varied in the range 27-80 degrees for 13 different ionic liquids based on imidazolium and ammonium salts. The surface morphology of the resulting surfaces was characterized using atomic force microscopy. The results revealed that the assembly of longer-substituent cations was characterized by the formation of spherical nanoparticles that were formed due to sequent aggregation of cations on those electrostatically assembled ones via hydrophobic interaction. In this case, the counteranions are present in the assembled layers and the wettability is accordingly affected. Whereas for shorter-substituent cations, no aggregates were formed due to the less hydrophobic interaction than the electrostatic repulsive interaction between the cations, and the counteranions were absent from the assembled layers. This method can also be utilized to quantify the hydrophobicity of various ionic liquids.

Cycling performance of lithium metal polymer cells assembled with ionic liquid and poly(3-methyl thiophene)/carbon nanotube composite cathode

A poly(3-methylthiophene) (PMT)/multi-walled carbon nanotube (CNT) composite is synthesized by in situ chemical polymerization. The PMT/CNT composite is used as an active cathode material in lithium metal polymer cells assembled with ionic liquid (IL) electrolytes. The IL electrolyte consists of 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIBF4) and LiBF4. A small amount of vinylene carbonate is added to the IL electrolyte to prevent the reductive decomposition of the imidazolium cation in EMIBF4. A porous poly(vinylidene fluoride-co-hexafluoropropylene) (P(VdF-co-HFP)) film is used as a polymer membrane for assembling the cells. Electrochemical properties of the PMT/CNT composite electrode in the IL electrolyte are evaluated and the effect of vinylene carbonate on the cycling performance of the lithium metal polymer cells is investigated. The cells assembled with a non-flammable IL electrolyte and a PMT/CNT composite cathode are promising candidates for high-voltage–power sources with enhanced safety.

Use of ionic liquids for π-conjugated polymer electrochemical devices

π-Conjugated polymers that are electrochemically cycled in ionic liquids have enhanced lifetimes without failure (up to 1 million cycles) and fast cycle switching speeds (100 ms). We report results for electrochemical mechanical actuators, electrochromic windows, and numeric displays made from three types of π-conjugated polymers: polyaniline, polypyrrole, and polythiophene. Experiments were performed under ambient conditions, yet the polymers showed negligible loss in electroactivity. These performance advantages were obtained by using environmentally stable, room-temperature ionic liquids composed of 1-butyl-3-methyl imidazolium cations together with anions such as tetrafluoroborate or hexafluorophosphate.

Structural studies of ambient temperature plastic crystal ion conductors

A number of novel organic ionic compounds based on the pyrrolidinium cation are described which have been found to be ion conductors in their solid states around room temperature. The properties of the compounds are consistent with their exhibiting plastic crystal phases. In order to understand some of the molecular origins of the plastic crystal behaviour and the ion conductivity that it promotes, a number of related compounds based on the imidazolium and ammonium cations are also described which have structural elements in common with the pyrrolidinium cation, but which do not show the plastic behaviour. It is found therefore that the nature of the cation is quite critical to the development of this behaviour. The alkyl methyl pyrrolidinium cation is found to produce plastic crystal phases when the alkyl chains are short, thereby preserving the ability of the cation to rotate with minimal steric hindrance. The ammonium and imidazolium cations of comparable size and structure are less able to produce these plastic phases, in many cases because the low temperature phase proceeds to melt rather than forming a stable rotator phase.

Conducting polymer electrochemistry in ionic liquids

Applications of polymers like polypyrrole and polythiophene often require interaction with an electrolyte consisting of solvent and dissolved salt. Ionic Liquids (ILs) are pure saits, fluid at room temperature, that form charged electrolytes. Pure l-Bu-3-Me-Imidazolium PF₆ (BMI PF₆) a hydrophobic IL that has a wide potential window, was used to investigate the electrochemistry ofpolypyrrole. Enhanced electrochemic~l stability of polypyrrole was obtained on repetitive redox cycling with respect to the equivalent propylene carbonate electrolyte with tetrabutylammonium hexaflurophosphate (TBA PF₆) electrolyte.

Ionic conductivity of polymer gels deriving from alkali metal ionic liquids and negatively charged polyelectrolytes

We have prepared polymer gel electrolytes with alkali metal ionic liquids (AMILs) that inherently contain alkali metal ions. The AMIL consisted of sulfate anion, imidazolium cation, and alkali metal cation. AMILs were mixed directly with poly(3-sulfopropyl acrylate) lithium salt or poly(2-acrylamido-2-methylpropanesulfonic acid) lithium salt to form polymer gels. The ionic conductivity of these gels decreased with increasing polymer fraction, as in general ionic liquid/polymer mixed systems. At low polymer concentrations, these gels displayed excellent ionic conductivity of 10⁻⁴ to 10⁻³ S cm⁻¹ at room temperature. Gelation was found to cause little change in the ⁷Li diffusion coefficient of the ionic liquid, as measured by pulse-field-gradient NMR. These data strongly suggest that the lithium cation migrates in successive pathways provided by the ionic liquids.

The zwitterion 1-butylimidazolium-3- (n-butanesulfonate)

The mol­ecule of the title compound, C₁₁H₂₀N₂O₃S, contains a positively charged imidazolium head group and a negatively charged sulfonate tethered together by a four-carbon chain. There is weak intermolecular hydrogen bonding within the structure between the sulfonate O atoms and the H atoms of the imidazolium ring. The sulfonate group causes a twisting of the butyl chain and a decrease in the dihedral angle between the second and third carbon chain compared to the unsubstituted butyl group.