Arsenic and heavy metal contamination of vegetables grown in Samta village, Bangladesh

Drinking of arsenic (As) contaminated well water has become a serious threat to the health of many millions in Bangladesh. However, the implications of contamination of agricultural soils from long-term irrigation with As-contaminated groundwater for phyto-accumulation in food crops, and thence dietary exposure to As, and other metals, has not been assessed previously in Bangladesh. Various vegetables were sampled in Samta village in the Jessore district of Bangladesh, and screened for As, Cd, Pb, Cu and Zn by inductively coupled plasma emission spectrometry (ICP-AES) and inductively coupled plasma mass spectrometry (ICP-MS). These local food products are the basis of human nutrition in this region and of great relevance to human health. The results revealed that the individual vegetables containing the highest mean As concentrations (μg g⁻¹) are snake gourd (0.489), ghotkol (0.446), taro (0.440), green papaya (0.389), elephant foot (0.338) and Bottle ground leaf (0.306), respectively. The As concentration in fleshy vegetable material is low. In general, the data show the potential for some vegetables to accumulate heavy metals with concentrations of Pb greater than Cd. Some vegetables such as bottle ground leaf, ghotkol, taro, eddoe and elephant foot had much higher concentrations of Pb. Other leafy and root vegetables, contained higher concentrations of Zn and Cu. Bioconcentration factors (BCF) values, based on dry weight, were below 1 for all metals. In most cases, BCF values decreased with increasing metal concentrations in the soil. From the heavily As-contaminated village in Samta, BCF values for As in ladies finger, potato, ash gourd, brinjal, green papaya, ghotkol and snake gourd were 0.001, 0.006, 0.006, 0.014, 0.030, 0.034 and 0.038, respectively. Considering the average daily intake of fresh vegetables per person per day is only 130 g, all the vegetables grown at Samta had Pb concentrations that would be a health hazard for human consumption. Although the total As in the vegetables was less than the recommended maximum intake of As, it still provides a significant additional source of As in the diet.

Microscopic nature and elemental composition of brown coal fly ash particles from a large coal fired power station

In this study, Australian brown coal fly ash particles have been collected from power station and analysed by scanning electron microscopy to obtain morphological information and elemental composition of individual particles. The most common particles found to be the irregular shape particle aggregates. Other shapes include ball shape with smooth surface and with some attachments; and crystal shape fine particles. The X-ray spectra of each fly ash particle revealed five groups of elemental composition, they are Si-rich particles; Ca-rich particles; Fe-rich particles; particles with Mg-Ca Matrix and particles with Si-Ca matrix. A particle sire distribution analysis has been conducted using particle size analyser and found to have a mean particle size of 21fim. The sample then was separated into fine and coarse fractions using aerodynamic classifier, and the elemental composition of both fractions were determined by ICP-AES. Borate fusion and acid dissolution method was used for sample preparation. It is found that some environmental sensitive elements such as Zn, Pb, Ni, K and Cu are enriched in fine fly ash particles. Ca has much higher contents in fine particles as well. Si and Mg have higher concentrations in coarse particles.

Using geopolymer to minimise metals leaching from brown coal fly ash

Fly ash is generated from combustion of brown coal in power stations. The majority of fly ash is removed by electrostatic precipitators (ESP) and finally disposed into the landfill as prescribed wastes. A method was studied to add clay materials to the brown coal fly ash in order to form the so-called geopolymer network, which is effective at stopping the metal contents from leaching, and have minimum impact to the environment. The experiments were conducted parallel on leached fly ash and dry precipitator fly ash. The ratios of fly ash and added clay materials were varied to determine the effects of different compositions on leaching rates. Both X-ray diffraction analysis and scanning electron microscopy images showed that as the percentage of fly ash was increased, the formation of geopolymer is reduced. Eighteen metals and heavy metals were targeted during the leaching tests and the leachate samples were analysed using ICP-AES and ICP-MS. It was found that the reduction of metal leaching was achieved by adding up to 60% of fly ash to form the geopolymer like structure. Significant reductions were observed for calcium, strontium and barium. Leached fly ash achieved better stabilisation than dry precipitator fly ash for major elements. It's hard to quantify its effects on trace metals leaching due to their ultra low concentration in the fly ash. The samples spiked with trace metals of lead, zinc, mercury and barium showed remarkable reduction in leaching.

International comparisons of construction industry performance: further investigations

While there have been many attempts at comparisons of construction performance over the past 50 years, the results have generally been inconclusive and/or contradictory.

Such comparisons are of great interest to industry, governments and theorists alike but there is little agreement as to how they are best done. A variety of methodologies have been used, however, the lack of satisfactory outcomes has been due largely to one factor, the lack of a truly reliable method for comparing construction costs in different currencies

Exchange rates are recognised as being unsuitable, and while purchasing power parity (PPP) has a long history, the method still has many critics. In addition, the nature of the building industry and its products makes the establishment of reliable construction PPPs very difficult. Both the UN’s International Comparison Program (ICP) and the European Union gather data for the production of construction-specific PPP indices, but neither body publishes them, as there is too much doubt about their reliability.

New approaches are being developed and some are soon to be trialled. This paper looks at the problems, describes and discusses some new approaches, and assesses their potential.

Quality of internal control procedures : antecedents and moderating effect on organisational justice and employee fraud

Purpose – This study aims to bring together theoretical concepts from the organizational justice, internal control and fraud literature to develop two distinct models relating to employee fraud and the quality of internal control procedures (ICP), respectively.

Design/methodology/approach – Survey data from 64 Australian firms were used to develop the two models. The first model was tested using a logistic regression analysis, and the second model was tested using a multiple regression analysis.

Findings – The first model reveals that the quality of ICP has a moderating effect on the relationship between perceptions of organizational justice and employee fraud. The second model indicates that ICP quality is significantly and positively related to three key organizational factors: the corporate ethical environment, the extent of risk management training of staff, and the internal audit (IA) activity level.

Practical implications – Risk management strategies relating to employee fraud will need to pay greater attention to organizational factors that affect both perceptions of justice at the workplace and ICP quality, including fostering a more ethical and equitable work environment, increasing IA activities and staff training in risk management.

Originality/value – Using the fraud triangle framework, this study extends previous literature by providing empirical evidence on the role of organizational justice and ICP regarding employee fraud.

Microstructures and bond strengths of the calcium phosphate coatings formed on titanium from different simulated body fluids

Calcium phosphate (Ca-P) coatings were deposited on Ti substrates by a biomimetic method from m-SBF and 10× SBF, respectively. Comparative study of microstructures and bond strengths of the Ca-P coatings deposited from those different SBFs was carried out. Effect of the surface roughness of the substrates on the bond strength of the Ca-P coatings was also studied. Scanning electron microscopy (SEM), X-ray diffractometry (XRD), Fourier transformed infrared spectroscopy (FTIR), inductive coupled plasma spectrometry (ICP) and thermogravimetry (TG) were used to characterize the Ca-P coatings. The bond strengths between the coatings and Ti substrates were measured using an adhesive strength test. Results indicated that the ionic concentrations of the SBFs and the surface roughness of the substrate had a significant influence on the formation, morphology and bond strength of the Ca-P precipitates. The induction period of time to deposit a complete Ca-P layer from the m-SBF is much longer, but the Ca-P coating is denser and has higher bond strength than that formed from the 10× SBF. The Ti with a surface roughness of R_a 0.64 µm and R_z 2.81 µm favoures the formation of a compact Ca-P coating from the m-SBF with the highest bond strength of approximately 15.5 MPa.

A non-radioactive method for measuring Cu uptake in HepG2 cells

At present, all data on Cu uptake and metabolism have been derived from radioactive uptake experiments. These experiments are limited by the availability of the radioactive isotopes ⁶⁴Cu or ⁶⁷Cu, and their short half-life (12.5 and 62 h, respectively). In this paper, we investigate an alternative method to study the uptake of Cu with natural isotopes in HepG2 cells, a liver cell line used extensively to study Cu metabolism. In nature, Cu occurs as two stable isotopes, ⁶³Cu and ⁶⁵Cu (⁶³Cu/⁶⁵Cu = 2.23). This ratio can be measured accurately using inductively coupled plasma mass spectrometry (ICP-MS). In initial experiments, we attempted to measure the time course of Cu uptake using ⁶⁵Cu. The change in the ⁶³Cu/⁶⁵Cu ratio, however, was too small to allow measurement of Cu uptake by the cells. To overcome this difficulty, the natural ⁶³Cu/⁶⁵Cu ratio in HepG2 cells was altered using long-term incubation with ⁶³Cu. This had a significant effect on Cu concentration in HepG2 cells, changing it from 81.9 ± 9.46 pmol μg DNA⁻¹ (week 1) to 155 ± 8.63 pmol μg DNA⁻¹ (week 2) and stabilising at 171 ± 4.82 pmol μg DNA⁻¹ (week 3). After three weeks of culture with 2 μM ⁶³Cu the ⁶³Cu/⁶⁵Cu changed from 2.18 ± 0.05 to 15.3 ± 1.01. Cu uptake was then investigated as before using ⁶⁵Cu. Uptake was linear over 60 min, temperature dependent and consistent with previous kinetics data. These observations suggest that stable isotope ICP-MS provides an alternative technique for the study of Cu uptake by HepG2 cells.

Internet child pornography : an examination of attachment and intimacy deficits

This study found that Internet child pornographers (ICP) reported significantly less optimal attachment than non-offenders, matched child and matched adult sexual offenders. ICP also reported a more negative view of self than non-offenders and the matched sexual offender groups. Finally, the ICP group reported more social avoidance and distress than non-offenders. The portfolio explores the influence of treatment readiness on the best practice principles when working with violent offenders in relation to their assessment, and subsequent treatment recommendations. The importance of treatment readiness and its utility in relation to these principles is highlighted in four case studies.

Deployment of DGT units in marine waters to assess the environmental risk from a deep sea tailings outfall

Measurements of total, filterable and DGT-labile concentrations of nine metals (Al, Cd, Cr, Cu, Fe, Pb, Mn, Ni and Zn) have been made at five sites up to 4.2km from a deep sea tailings outfall operated by Lihir Gold Ltd. at Lihir Island, Papua New Guinea. At each site, pairs of DGT units (one containing a 0.4mm and the other a 0.8mm diffusive gel layer) were deployed at three depths (50–70; 105–130; 135–155m) for 4–7 days. Comparison of predicted water column DGT-labile metal concentrations in field deployments showed the 0.8mm DGT units were relatively enriched in metals, with the effect being greatest closer to the outfall for Pb and Mn and least for Fe, Cr, Ni and Zn. The most likely explanation for this is that in addition to simple ion diffusion, kinetic factors associated with ageing or desorption processes govern release of metals from iron and aluminium oxyhydroxide colloids which diffuse through the gels. The thicker gels have a longer residence time over which metals can be released for adsorption. This model explains why enrichment is most pronounced near the outfall; more distant sites have lower colloid concentrations because of the longer time for coagulation to increase particle sizes to the extent they cannot enter the gels. Total and filterable metal (FM) concentrations were frequently below the limits of detection (LOD) achievable by conventional ICP-AES (1–52gL⁻¹) and this limited their usefulness for assessing environmental risk and for metal speciation determination. Because of its pre-concentration step DGT gave metal concentrations above their LODs and these decreased exponentially with distance from the outfall. Concentrations of DGT–labile metal fell below Australian water quality guidelines for protection of 99% of marine organisms within 0.13km of the outfall for Cd, Cr and Ni and below that for protection of 95% of marine organisms within 0.4, 0.7 and 3.6km for lead, zinc and copper, respectively.

Arsenic speciation in the freshwater crayfish, Cherax destructor Clark

Arsenic is a proven carcinogen that is found in the soil in gold mining regions at concentrations that can be thousands of times greater than gold. During mining arsenic is released into the environment, easily entering surrounding water bodies.
The yabby (Cherax destructor) is a common freshwater crustacean native to Australia's central and eastern regions. Increasing aquaculture and export of these animals has led us to question the effects of mine contamination on the yabbies themselves and to assess any potential risks to consumers. This study determined the species of arsenic present in a number of organs from the yabby. Several arsenic contaminated dam sites in the goldfields of western Victoria were sampled for yabby populations. Yabbies from these sites were collected and analysed for arsenic speciation using high performance liquid chromatography–inductively coupled plasma-mass spectrometry (HPLC–ICP-MS). Results showed that type of exposure influenced which arsenic species was present in each organ, and that as arsenic exposure increased the prevalence of inorganic arsenic species, mostly As(V), within the tissues increased. The bioaccessibility of the arsenic present in the abdominal muscle (the edible portion for humans) of the yabbies was assessed. It was found that the majority of the bioaccessible arsenic was present as inorganic As (III) and As(V).

Redox voltammetry of sub-parts per billion levels of Cu2+ at polyaspartate-modified gold electrodes

An electrochemical sensor for the detection of Cu2+ is reported which incorporates poly-l-aspartic acid (PLAsp) with 32–96 aspartate units as a selective ligand for the metal ion. PLAsp is covalently attached to a gold electrode modified with a monolayer of 3-mercaptopropionic acid using carbodiimide coupling via an N-hydroxysuccinimide (NHS) ester intermediate. The acid side groups and deprotonated peptide nitrogens on two aspartate moieties are thought to be primarily responsible for chelation of Cu2+, which remains bound when reduced to Cu+. A consequence of the multiple binding points that are available with a polypeptide is the low detection limit. The lowest concentration detected was 3 nM (0.2 ppb) achieved with Osteryoung square wave voltammetry. This detection limit compares favourably with that of ICP-OES and previously reported cysteine-modified electrodes. Analysis of tap and lake water samples using the PLAsp-modified electrode agreed well with ICP-OES analysis of the same samples.

Using otolith microchemistry and shape to assess the habitat value of oil structures for reef fish

Over 7500 oil and gas structures (e.g. oil platforms) are installed in offshore waters worldwide and many will require decommissioning within the next two decades. The decision to remove such structures or turn them into reefs (i.e. 'rigs-to-reefs') hinges on the habitat value they provide, yet this can rarely be determined because the residency of mobile species is difficult to establish. Here, we test a novel solution to this problem for reef fishes; the use of otolith (earstone) properties to identify oil structures of residence. We compare the otolith microchemistry and otolith shape of a site-attached coral reef fish (Pseudanthias rubrizonatus) among four oil structures (depth 82-135 m, separated by 9.7-84.2 km) on Australia's North West Shelf to determine if populations developed distinct otolith properties during their residency. Microchemical signatures obtained from the otolith edge using laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) differed among oil structures, driven by elements Sr, Ba and Mn, and to a lesser extent Mg and Fe. A combination of microchemical data from the otolith edge and elliptical Fourier (shape) descriptors allowed allocation of individuals to their 'home' structure with moderate accuracy (overall allocation accuracy: 63.3%, range: 45.5-78.1%), despite lower allocation accuracies for each otolith property in isolation (microchemistry: 47.5%, otolith shape: 45%). Site-specific microchemical signatures were also stable enough through time to distinguish populations during 3 separate time periods, suggesting that residence histories could be recreated by targeting previous growth zones in the otolith. Our results indicate that reef fish can develop unique otolith properties during their residency on oil structures which may be useful for assessing the habitat value of individual structures. The approach outlined here may also be useful for determining the residency of reef fish on artificial reefs, which would assist productivity assessments of these habitats.

Elemental and metabolite profiling of nickel hyperaccumulators from New Caledonia

Leaf material from nine Ni hyperaccumulating species was collected in New Caledonia: Homalium kanaliense (Vieill.) Briq., Casearia silvana Schltr, Geissois hirsuta Brongn. & Gris, Hybanthus austrocaledonicusSeem, Psychotria douarrei (G. Beauvis.) Däniker, Pycnandra acuminata (Pierre ex Baill.) Swenson & Munzinger (syn Sebertia acuminata Pierre ex Baill.), Geissois pruinosa Brongn. & Gris, Homalium deplanchei (Viell) Warb. and Geissois bradfordii (H.C. Hopkins). The elemental concentration was determined by inductively-coupled plasma optical emission spectrometry (ICP-OES) and from these results it was foundthat the species contained Ni concentrations from to 250–28,000 mg/kg dry mass. Gas chromatography mass spectrometry (GC–MS)-based metabolite profiling was then used to analyse leaves of each species.The aim of this study was to target Ni-binding ligands through correlation analysis of the metabolite levels and leaf Ni concentration. Approximately 258 compounds were detected in each sample. As has been observed before, a correlation was found between the citric acid and Ni concentrations in the leaves for all species collected. However, the strongest Ni accumulator, P. douarrei, has been found to contain particularly high concentrations of malonic acid, suggesting an additional storage mechanism for Ni. A size exclusion chromatography separation protocol for the separation of Ni-complexes in P. acuminata sap was also applied to aqueous leaf extracts of each species. A number of metabolites were identified in complexes with Ni including Ni-malonate from P. douarrei. Furthermore, the levels for some metabolites were found to correlate with the leaf Ni concentration. These data show that Ni ions can be bound by a range of small molecules in Ni hyperaccumulation in plants.