Comparative greenhouse emissions anayalsis of domestic solar hot water systems

It is commonly assumed that solar hot water systems save energy and reduce greenhouse emissions relative to conventional fossil fuel-powered systems. Very rarely has the life-cycle greenhouse emissions (including the embodied greenhouse emissions of manufacture) of solar hot water systems been analysed. The extent to which solar hot water systems can reduce emissions compared with conventional systems can be shown through a comparative life-cycle greenhouse emissions analysis. This method determined the time it takes for these net greenhouse emissions savings to occur, or the 'emissions payback period'. This paper presents the results of a life-cycle greenhouse emissions analysis of solar hot water systems in comparison with conventional hot water systems for a southern (Melbourne) and a northern (Brisbane) Australian city.

Net energy analysis of solar and conventional domestic hot water systems in Melbourne, Australia

It is commonly assumed that solar hot water systems save energy and reduce greenhouse gas emissions. The net energy requirement of solar hot water systems has rarely been analysed, including their embodied energy. The extent to which solar hot water systems save energy compared to conventional systems in Melbourne, Australia, is shown through a comparative net energy analysis. It was shown that the embodied energy component of the net energy requirement of solar and conventional hot water systems was insignificant. The solar hot water systems provided a net energy saving compared to the conventional systems after 0.5–2 years, for electric- and gas-boosted systems respectively.

Net energy analysis of solar and conventional domestic hot water systems in Melbourne, Australia

It is commonly assumed that solar hot water systems save energy and reduce greenhouse gas emissions. Very rarely has the life-cycle energy requirements of solar hot water systems been analysed, including their embodied energy. The extent to which solar hot water systems save energy compared to conventional systems in Melbourne, Australia, is shown through a comparative net energy analysis. The solar systems provided a net energy saving compared to the conventional systems after 0.5 to 2 years, for electricity and gas systems respectively.

Solar versus fossil fuels : A net energy analysis of domestic solar hot water systems in Australia

It is commonly assumed that solar hot water systems save energy and reduce greenhouse gas emissions compared to conventional electric and gas hot water systems. Very rarely has the life-cycle energy requirements (including the embodied energy of manufacture) of solar hot water systems been analysed. The extent to which solar hot water systems can save energy compared to conventional electric or gas hot water systems can be shown through a comparative net energy analysis. This method determines the ‘energy payback period’, including consideration of the difference in operational energy savings and energy embodied in the devices relative to a base case. Dr Robert Crawford, Deakin University, Australia presents the results of a net energy analysis that compared solar and conventional hot water systems for a southern (Melbourne) and a northern (Brisbane) Australian climate.

Water quality modelling of the Barwon Water Supply System

An existing computer model (QUAL2E) was adapted to simulate the flow and water quality of the Barwon Water Supply System, the major water supply system for Geelong. Various water quality parameters were modelled and options reviewed for improving the water quality in this System.

Performance of building integrated solar hot water systems

The integration of solar energy systems into buildings has been the subject of considerable commercial and academic research, particularly building integrated photovoltaics. However, the integration of solar hot water systems into roofing systems has had far less attention. This paper presents the theoretical and experimental results of a novel building integrated solar hot water system developed using existing long run roofing materials.

This work shows that it is possible to achieve effective integration that maintains the aesthetics of the building and also provides useful thermal energy. The results of an unglazed 108m2 swimming pool heater and 8m2 glazed domestic hot water systems are presented.

The experimental results show that the glazed system performs close to the theoretical model and is an effective provider of hot water in certain climates. However it was also found that for larger scale building integrated solar water heating systems, special attention must be paid to the configuration and arrangement of the collectors in order to minimise problems with respect to flow distribution and its effect on collector and system efficiency.

Paradigm shift to enhanced water supply planning through augmented grids, scarcity pricing and adaptive factory water : a system dynamics approach

This paper details a system dynamics model developed to simulate proposed changes to water governance through the integration of supply, demand and asset management processes. To effectively accomplish this, interconnected feedback loops in tariff structures, demand levels and financing capacity are included in the model design, representing the first comprehensive life-cycle modelling of potable water systems. A number of scenarios were applied to Australia's populated South-east Queensland region, demonstrating that introducing temporary drought pricing (i.e. progressive water prices set inverse with availability), in conjunction with supply augmentation through rain-independent sources, is capable of efficiently providing water security in the future. Modelling demonstrated that this alternative tariff structure reduced demand in scarcity periods thereby preserving supply, whilst revenues are maintained to build new water supply infrastructure. In addition to exploring alternative tariffs, the potential benefits of using adaptive pressure-retarded osmosis desalination plants for both potable water and power generation was explored. This operation of these plants for power production, when they would otherwise be idle, shows promise in reducing their net energy and carbon footprints. Stakeholders in industry, government and academia were engaged in model development and validation. The constructed model displays how water resource systems can be reorganised to cope with systemic change and uncertainty.

Drought and desalination: Melbourne water supply and development choices in the twenty-first century

Sharply reduced catchment inflows across Australia around the end of the twentieth century led to a sequence of water restrictions followed, as the drought persisted, by approximately $10 billion of investments in desalination plants near Perth, Adelaide, Melbourne, Sydney and Brisbane. This Deakin University project jointly with Griffith University, for the National Centre of Excellence in Desalination (NCEDA), follows these new investments. We ask how best to manage bulk water supply and retail supply given the facts and fears of uncertain rainfall, modelled over a 100 year simulation period. We use Monte Carlo style studies aiming to capture the new tensions and trade-offs regarding uncertain climate, rainfall and water supply. There are presently no comprehensive life-cycle approaches to model city water balances that incorporate economic feedbacks, such as tariff adjustment, which can in turn create a financing capacity for such investment responses to low catchment levels, models that could provide significant policy implications for water planners. This project addresses the gap, and presents excerpts from a system dynamics model that augments the usual water utility representation of the physical linkages and water grids. We add inter-connected feedback loops in tariff structures, demand levels and financing capacity. Tariffs are reset in association with drought and the modelling of responses both in terms of reduced consumption and increased revenue to the utility, depending on the elasticities of demand responses to higher tariffs, both short and long term, while also allowing effects from any transitional restrictions. Before reporting on parts of the simulations applied to Melbourne, this paper will first review the general issues surrounding whether desalination is or can be a “game changer” for economic development that hinges on secure water supply. We then explore options in bulk water supply management when desalination augments the choices, including catchments, dams, recycling, pipelines from rivers and savings in irrigation. Finally, the paper addresses the intriguing and important question of the value and cost of providing water for environmental uses.

Long-term water supply planning in an Australian coastal city : Dams or desalination?

Water resource managers and planners are continually involved in defining and evaluating alternative policies to better meet changing water supply conditions and the expectations of society. To undertake such long-term water supply planning, this study developed a novel integrated system dynamics model to combine economic, social and scientific variables and considerations within the planning horizon. Extensive sensitivity analysis for these variables was considered in this long term water resource planning process. The analysis suggests that over a longer time horizon, desalination provides a more viable, cost effective and secure bulk water supply alternative when compared to building large rain-dependent dams.

Developing a systems understanding of rural water supply in Timor-Leste

 Systems thinking techniques help to explain the lack of robustness of rural water systems in Timor-Leste. Development drivers currently promote increasing coverage of water programs with little concern for ongoing functionality. Investing in increased community participation, and promoting community and individual decision making, would improve the robustness of these systems.

Streptomyces caldifontis sp. nov., isolated from a hot water spring of Tatta Pani, Kotli, Pakistan

A Gram-staining positive, non-motile, rod-shaped, catalase positive and oxidase negative bacterium, designated NCCP-1331(T), was isolated from a hot water spring soil collected from Tatta Pani, Kotli, Azad Jammu and Kashmir, Pakistan. The isolate grew at a temperature range of 18-40 °C (optimum 30 °C), pH 6.0-9.0 (optimum 7.0) and with 0-6 % NaCl (optimum 2 % NaCl (w/v)). The phylogenetic analysis based on 16S rRNA gene sequence revealed that strain NCCP-1331(T) belonged to the genus Streptomyces and is closely related to Streptomyces brevispora BK160(T) with 97.9 % nucleotide similarity, followed by Streptomyces drosdowiczii NRRL B-24297(T) with 97.8 % nucleotide similarity. The DNA-DNA relatedness values of strain NCCP-1331(T) with S. brevispora KACC 21093(T) and S. drosdowiczii CBMAI 0498(T) were 42.7 and 34.7 %, respectively. LL-DAP was detected as diagnostic amino acid along with alanine, glycine, leucine and glutamic acid. The isolate contained MK-9(H8) as the predominant menaquinone. Major polar lipids detected in NCCP-1331(T) were phosphatidylethanolamine, phosphatidylinositol and unidentified phospholipids. Major fatty acids were iso-C16: 0, summed feature 8 (18:1 ω7c/18:1 ω6c), anteiso-C15:0 and C16:0. The genomic DNA G + C content was 69.8 mol %. On the basis of phylogenetic, phenotypic and chemotaxonomic analysis, it is concluded that strain NCCP-1331(T) represents a novel species of the genus Streptomyces, for which the name Streptomyces caldifontis sp. nov. is proposed. The type strain is NCCP-1331(T) (=KCTC 39537(T) = CPCC 204147(T)).