Anaerobic treatment of juice and fruit-processing effluents

Effluents from the juice and fruit processing industries have high organic matter content. Discharge of these effluents without appropriate treatment would therefore have a negative impact on the environment. High organic contents and low contamination levels make such effluents suitable for biological treatment, especially anaerobic digestion. In the latter process, significant amounts of digester gas can be produced, turning a waste stream into a source of renewable energy that can be used for electricity and heat production, leading to financial benefits.This paper investigates the feasibility of anaerobic digestion and the gas generation potential of five different effluents from the carrot-juice, orange-juice and sultana processing industries. Benefits are assessed in terms of digester gas production and organic matter reduction. The results show that the specific gas production ranges between 665 and 860 m3 per tonne of effluent treated (as organic dry matter). Furthermore, nearly 100% of the organic matter is converted into gas in the case of the carrot- and orange-juice processing residues, while a 84.5% reduction of the organic matter was found to be achievable in the case of the sultana wastes. While these results are promising, further testing will be required to validate them in a larger scale.

Wastewater reuse and treatment options for the dairy industry

Milk-processing plants generate significant quantities of wastewater with relatively high organic matter concentrations on a daily basis. In addition to environmental damage that can result from the discharge of these wastewaters into the natural waterways, the presence of products such as milk solids into wastewater streams represents a loss of valuable product for the plants. This paper presents a review of wastewater management practices employed by six milk-processing plants in Victoria, Australia. In all six plants investigated, milk powder represents a major product. During the milk powder production, water is evaporated, condensed and can be reused for various purposes with a significant impact on water usage. Other major products are anhydrous milk fat, cheese, butter, and UHT milk. The effectiveness of the practices was assessed through two main criteria: first through the water to milk intake ratio, and the waste volume coefficient. Both parameters characterise the plant efficiency in regard of water consumption and water reuse, Information on cleaning chemical usage and recovery was also assessed as part of the review. Significant discrepancies emerge between the plants first due to the products manufacturad and water reuse possibilities available in each plant. Second the type of treatment technologies used for condensate and cleaning solution influences the figures. One of the investigated plants is almost self-sufficient for water, emphasising the benefits gained from the use of technologies like membrane separations for condensate and cleaning solution treatment. In some cases, less cost-intensive technologies such as a clarifier are successful to improve cleaning agent recovery.

Evaluating the performance of horizontal subsurface flow constructed wetlands using natural zeolite (escott)

The objective of the present study was to assess the simultaneous removal of physiochemical parameters in moderate strength wastewater using a lab scale horizontal subsurface flow constructed wetland (HFCW) with natural zeolite as a substrate. In this study, high-density polyethylene tanks (0.36 m²) were planted with phragmites australis and scirpus maritimus and received 0.012 m³/d to 0.08 m³/d of synthetic wastewater corresponding to a HLR of 0.035 to 0.243 m/d and a COD loading rate of 0.0148 kg COD (m².d)^-1 to 0.026 kg COD (m².d)^-1. The HFCW was subjected to three hydraulic retention times (HRT) for 4, 3 and 2 days respectively. Averaged data reported coincided with the plant age (4 to 55 weeks) and covered the entire cold season and early part of the hot season. Based on the 55 weeks of operation, the HFCW unit with zeolite achieved significantly higher removal for COD (85 to 88%), TN (54 to 96%), NH₄-N (50 to 99%) and TSS (91 to 96%) respectively at all HRT. This system was proved to be tolerant to high organic loadings and nutrients, suggesting these substrates as viable options for biological treatment of wastewater.

Evaluating the performance of different media in a horizontal subsurface flow constructed wetland

The treatment efficiency of a wetland system requires a balance between pollutant loading rate and hydraulic retention time (HRT), hydraulic loading rate (HLR) and the suitable substrate to be used. The aim of this study was to investigate the treatment efficiency of horizontal subsurface flow constructed wetland planted with phragmites australis and scirpus maritimus containing three different substrates to treat agricultural wastewater under short term operation. Alum sludge and zeolite were used as substrates and gravel was used as a control for a laboratory-scale horizontal flow constructed wetland (CW) units that were made of high-density Polyethylene. The units were operated under 2, 3 and 4 days of HRTs and at different HLR for each substrate. Each beds received 0.012 m3/d to 0.08 m3/d of synthetic wastewater corresponding to a HLR of 0.035 to 0.243 m/d and a COD loading rate of 0.0148 kg COD (m2.d)-1 to 0.026 kg COD (m2.d)-1. The relationships between the substrate, retention time and removal efficiency, especially of organic matter and nutrient removal were investigated. All units showed relatively stable removal for COD during the entire operational period. The COD removal for all units and HRT were in ranged from 67% to 93%. The zeolite unit achieved significantly higher removal of TN, NH4-N and TSS compared to alum sludge and gravel unit at all HRT. The unit with zeolite was highly effective in removing TN (54 to 96%), NH4-N (50 to 99%) and TSS (91 to 96%) respectively, at 2, 3 and 4 days of HRT. Meanwhile, alum sludge was highly effective in removing phosphate. The removal of phosphate from alum sludge unit was ranged from 94 to 97% for all HRT. Compared to gravel CW unit, zeolite and alum sludge CW were proved to be tolerant to high organic loadings and nutrients, suggesting these substrates as viable options for biological treatment of agricultural wastewater.

Seagrass viviparous propagules as a potential long-distance dispersal mechanism

Resilience of seagrass meadows relies on the ability of seagrass to successfully recolonise denuded areas or disperse to new areas. While seed germination and rhizome extension have been explored as modes of recovery and expansion, the contribution of seagrass viviparous propagules to meadow population dynamics has received little attention. Here, we investigated the potential of seagrass viviparous propagules to act as dispersal vectors. We performed a series of density surveys, and in situ and mesocosm-based experiments in Port Phillip Bay, VIC, Australia, using Zostera nigricaulis, a species known to produce viviparous propagules. Production of viviparous propagules was higher at sites with high wind and current exposure, compared to more sheltered environments. A number of propagules remained buoyant and healthy for more than 85 days, suggesting the capacity for relatively long-distance dispersal. Transplanted propagules were found to have improved survivorship within seagrass habitats compared to bare sediment over the short term (4 weeks); however, all propagules suffered longer-term (<100 days) mortality in field experiments. Conditions outside of meadows, including sediment scouring, reduced the likelihood of successful colonisation in bare sediment. Furthermore, sediment characteristics within meadows, such as a smaller grain size and high organic content, positively influenced propagule establishment. This research provides preliminary evidence that propagules have the potential to act as an important long-distance dispersal vector, a process that has previously gone unrecognised. Even though successful establishment of propagules may be rare, viviparous propagules show great potential for seagrass populations given they are facing global decline. © 2014 Coastal and Estuarine Research Federation.

Abnormally high optical transmittance of refractive-index modified ZnO / organic hybrid films

Hybrid films consisting of ZnO nanoparticles and organic matrices were fabricated at particle concentration levels of up to 60 wt%. The correlation between the refractive index and optical transmittance in the visible light region was investigated. The refractive index of the hybrid films was modified in a continuous manner in the range from 1.44 to 1.55. The refractive index increased linearly as a function of particle concentration. On the other hand, optical transmittance showed little change above the particle volume fraction of 0.08.

An organic ionic plastic crystal electrolyte based on the triflate anion exhibiting high proton transport

A novel organic ionic plastic crystal (OIPC) electrolyte based on a quaternary ammonium cation and the triflate anion has been synthesized, which shows fast proton transport and high thermal stability in the solid state when doped with triflic acid.

Organic ionic plastic crystal electrolytes; a new class of electrolyte for high efficiency solid state dye-sensitized solar cells

Dye-sensitized solar cells are an increasingly promising alternative to conventional silicon solar cells as a method of converting solar energy to electricity and thus providing an effectively inexhaustible energy source. However, the most efficient of these devices currently utilize liquid electrolytes, which suffer from the associated problems of leakage and evaporation. Hence, significant research is currently focused on the development of solid state alternatives. Here we report a new class of solid state electrolyte for these devices, organic ionic plastic crystal electrolytes, that allow relatively rapid diffusion of the redox couple through the matrix, which is critical to the cell performance. A range of different organic ionic plastic crystal materials, utilizing different cation and anion structures, have been investigated and the conductivities, diffusion rates and photovoltaic performance of the electrolytes are reported. The best material, utilizing the dicyanamide anion, achieves efficiencies of more than 5%.

Novel Na+ Ion diffusion mechanism in mixed organic-inorganic ionic liquid electrolyte leading to high Na+ transference number and stable, high rate electrochemical cycling of sodium cells

Ambient temperature sodium batteries hold the promise of a new generation of high energy density, low-cost energy storage technologies. Particularly challenging in sodium electrochemistry is achieving high stability at high charge/discharge rates. We report here mixtures of inorganic/organic cation fluorosulfonamide (FSI) ionic liquids that exhibit unexpectedly high Na+ transference numbers due to a structural diffusion mechanism not previously observed in this type of electrolyte. The electrolyte can therefore support high current density cycling of sodium. We investigate the effect of NaFSI salt concentration in methylpropylpyrrolidinium (C3mpyr) FSI ionic liquid (IL) on the reversible plating and dissolution of sodium metal, both on a copper electrode and in a symmetric Na/Na metal cell. NaFSI is highly soluble in the IL allowing the preparation of mixtures that contain very high Na contents, greater than 3.2 mol/kg (50 mol %) at room temperature. Despite the fact that overall ion diffusivity decreases substantially with increasing alkali salt concentration, we have found that these high Na+ content electrolytes can support higher current densities (1 mA/cm2) and greater stability upon continued cycling. EIS measurements indicate that the interfacial impedance is decreased in the high concentration systems, which provides for a particularly low-resistance solid-electrolyte interphase (SEI), resulting in faster charge transfer at the interface. Na+ transference numbers determined by the Bruce-Vincent method increased substantially with increasing NaFSI content, approaching >0.3 at the saturation concentration limit which may explain the improved performance. NMR spectroscopy, PFG diffusion measurements, and molecular dynamics simulations reveal a changeover to a facile structural diffusion mechanism for sodium ion transport at high concentrations in these electrolytes.

Anaerobic degradation of organic materials - significance of the substrate surface area

In anaerobic degradation of substrates containing mainly particulate organic matter, solids hydrolysis is rate-limiting. In these investigations, the particle size of various substrates was reduced by comminution to support hydrolysis. Two positive effects of comminution were observed. For substrates with high fibre content, which are particularly resistant to biodegradation, a significant improvement of the degradation degree was observed as a result of comminution. Secondly, for all substrates tested, and particularly for those rich in fibres, the degradation rate of comminuted samples was significantly higher. The first reason for both effects is an increase of the sample surface area. Several methods for measuring the specific surface area of organic materials, including particle size analysis, Nitrogen-adsorption and enzyme adsorption, were used and compared for the purpose of this study, where the surface area accessible to microbial enzymes is critical. The significance of the surface area in anaerobic degradation of particulate substrates was investigated through a kinetic model where the hydrolysis rate was based on the sample surface area. Good agreements were obtained between model and experiments carried out with samples of various specific surface areas. These results reinforced the significance of the sample surface area in anaerobic degradation processes. However, other effects of comminution responsible for the increased degradation degree and degradation rate were identified and discussed. These include: the increase of dissolved compounds due to cell rupture, exposition of surface areas previously inaccessible for microbial degradation, and alteration of the sample structure such as the lignin-cellulose arrangements.

High-resolution terrestrial permian-triassic eventostratigraphic boundary in western Guizhou and eastern Yunnan, southwestern China

The adjoining area of western Guizhou and eastern Yunnan Provinces in southwest China is an ideal place to investigate the feasibility of correlating marine and nonmarine Permian–Triassic boundary (PTB) sequences, as it contains outcrop sections of shallow marine, marginal marine (or paralic), and terrestrial PTB sections, all in close geographic proximity. This paper documents for the first time multiple stratigraphic data from several well-preserved terrestrial PTB sections in the area and attempts to use these data to define, locate, and correlate the PTB in the area. A study of the spores and pollen and vegetation types across the terrestrial PTB sections in the study area suggests three distinct evolutionary stages across the boundary: Stage 1 (Xuanwei Formation) is characterised by Late Permian or Paleozoic-type ferns and pteridosperms (85.0%), with a few gymnosperms (15.0%); stage 2 is marked by an abrupt drop of sporopollen elements of Late Permian aspects, coupled with the appearance of fungal spores and limited Early Triassic palynomorphs; stage 3 (top Xuanwei Formation and Kayitou Formation) is dominated by gymnosperm pollen (58.8%) of clearly Early Triassic aspect, although still retaining limited ferns and pteridosperms. The three biotic stages seem to well correspond with the changing trend of the δ13Corg curves from the same sections, which is characterized by a sharp drop just before the PTB, followed by a short term partial recovery across the boundary, and then succeeded by a gradual decline after the PTB in the Early Triassic. Combining evidence from eventostratigraphic (i.e., the succession of boundary clay beds), biostratigraphic (using both macroplants and palynomorphs), and chemostratigraphic (i.e., organic carbon isotope excursion signals), we propose that a high-resolution PTB succession, closely correlatable to its marine counterpart at the Meishan section in eastern China, is recognisable at the terrestrial PTB sections in the western Guizhou–eastern Yunnan area in southwest China.

Photodegradation, interaction with iron oxides and bioavailability of dissolved organic matter from forested floodplain sources

Photochemical degradation of dissolved organic matter (DOM) can influence food webs by altering the availability of carbon to microbial communities, and may be particularly important following periods of high DOM input (e.g. flooding of forested floodplains). Iron oxides can facilitate these reactions, but their influence on subsequent organic products is poorly understood. Degradation experiments with billabong (= oxbow lake) water and river red gum (Eucalyptus camaldulensis) leaf leachate were conducted to assess the importance of these reactions in floodplain systems. Photochemical degradation of DOM in sunlight-irradiated quartz tubes (with and without amorphous iron oxide) was studied using gas chromatography and UV-visible spectroscopy. Photochemical reactions generated gaseous products and small organic acids. Bioavailability of billabong DOM increased following irradiation, whereas that of leaf leachate was not significantly altered. Fluorescence excitation-emission spectra suggested that the humic component of billabong organic matter was particularly susceptible to degradation, and the source of DOM influenced the changes observed. The addition of amorphous iron oxide increased rates of photochemical degradation of leachate and billabong DOM. The importance of photochemical reactions to aquatic systems will depend on the source of the DOM and its starting bioavailability, whereas inputs of freshly formed iron oxides will accelerate the processes.

Abnormal transmittance of refractive-index-modified ZnO/organic hybrid films

The refractive index of ZnO/organic nanocomposite films was modified in the range from 1.44 to 1.55, while maintaining high visible transparency. The transparency of the nanocomposite films showed an abnormal behaviour as a function of the loading level of inorganic particles, because it did not decrease according to the Beer-Lambert law, but rather saturated to a near-constant value at high particle loading levels above 8 vol.-%. On the other hand, the refractive index of the film showed good agreement with the Bruggemann model, linearly increased as particle concentration increased. This result indicates the possibility of fabricating highly transparent nanocomposite films with controlled refractive indices.

The 'filler-effect' in organic ionic plastic crystals : Enhanced conductivity by the addition of nano-sized TiO2

The addition of nano-sized ceramic particles to the plastic crystal ethyl-methyl pyrrolidinium bis(trifluoromethane sulfonyl)amide (P₁₂TFSA) has been investigated by means of DSC and conductivity. The thermal behaviour of the plastic crystal as a function of filler content suggests that the filler particles decrease the onset temperature of the melting slightly at high loadings, however they do not decrease the crystallinity of the material. Furthermore, the IV → III transition decreases in intensity, indicating that the addition of filler increases the possibility for the crystal to remain in metastable rotator phases also at lower temperatures. The conductivity shows a more than one order of magnitude increase with the addition of filler, with a filler concentration dependence that levels out above ~ 10 wt.% TiO₂.