Comparing the hairiness of solospun and ring spun worsted yarns

This paper compares the hairiness of Solospun yarns with conventional ring spun worsted yams of the same specifications. A 24-spindles worsted ring spinning frame is used to spin the Solospun and conventional ring spun yarns at the same time, and yarn hairiness is measured. The total hairiness number (Tp), the number of hairs longer than or equal to 3mm (S3), the percentage of longer hairs in total hairs (100S3/Tp), and the total hair length per unit yarn length (K' ) are used to compare the hairiness of these yams. The results indicate that the Solospun yarn exhibits less hairiness in each of the hair length groups and has lower variations in yarn hairiness. The hair-length distribution of the Solospun yarn follows an exponential law just like conventional ring spun yams. There is a statistically significant difference between the Solospun and conventional ring spun yams for T p, S3, and K', but the difference in 1 00S 3/Tp is not statistically significant for these yams. In addition, the Tp, S3, and K' values of the Solospun yarn decrease with twist increase and increase with spindle speed increase, but the 100S3/Tp values of the Solospun and conventional ring spun yarns in this study behave differently in that they are affected by twist level and spindle speed.

The hairiness of worsted wool and cashmere yarns and the impact of fiber curvature on hairiness

In this study, a range of carefully selected wool and cashmere yarns as well as their blends were used to examine the effects of fiber curvature and blend ratio on yarn hairiness. The results indicate that yarns spun from wool fibers with a higher curvature have lower yarn hairiness than yarns spun from similar wool of a lower curvature. For blend yarns made from wool and cashmere of similar diameter, yarn hairiness increases with the increase in the cashmere content in the yarn. This is probably due to the presence of increased proportion of the shorter cashmere fibers in the surface regions of the yarn, leading to increased yarn hairiness. A modified hairiness composition model is used to explain these results and the likely origin of leading and trailing hairs. This model highlights the importance of yarn surface composition on yarn hairiness.

A controlled experiment on yarn hairiness and fabric pilling

This study focused on the hairiness of worsted wool yarns and how it affects the pilling propensity of knitted wool fabrics. Conventional worsted ring spun yarns were compared with comparable SolospunTM yarns and yarns modified with a hairiness reducing air nozzle in the winding process (JetWind). Measurements of yarn hairiness (S3) on the Zweigle G565 hairiness meter showed a reduction in the S3 value of approximately 46% was achieved using SolospunTM ring spinning attachment and a 33% reduction was achieved using the JetWind process. Interestingly, subsequent evaluation of the pilling performance of fabrics made from the SolospunTM spun yarn and JetWind modified yarn showed a half grade and full grade improvement, respectively over a similar fabric made from conventional ring spun yarns. This result suggested that a relatively large reduction in yarn hairiness was needed to achieve a moderate improvement in fabric pilling, and that the nature of yarn hairiness was also a key factor in influencing fabric pilling propensity. It is postulated that the wrapping of surface hairs by the air vortex in the JetWind process may limit the ability of those surface fibers to form fuzz and reach the critical height required for pill formation.

Development and use of a model system to monitor clubroot disease progression with an Australian field collection of Plasmodiophora brassicae

A modified sand–liquid culture method facilitated easy visualisation of the primary life cycle stages of Plasmodiophora brassicae within clean root hairs of the Arabidopsis host. Pathogen penetration occurred from day 4 onwards and then primary plasmodia developed within the host root. Several Arabidopsis ecotypes tested in varying growth conditions showed differences in disease expression. Defined growth cabinet conditions were found most suitable for studying disease progression in the ecotypes and for achieving uniform infection and disease development. Arabidopsis ecotypes Ta-0 and Tsu-0 known to be partially resistant to a German single-spore isolate of P. brassicae were susceptible to an Australian (Victorian) field population of P. brassicae. The European clubroot differential test was used to confirm virulence and describe the pathotype of the Victorian field population. Knowledge of the interaction of an Australian population of P. brassicae with its host will provide valuable information on a disease which is very difficult to control.

Yarn setting and hairiness reduction with a steam jet during winding

This paper examines the use of pressurized steam for wrapping and setting the yarn hairs concurrently via a new steam-jet process during winding. Yarn torque can also be stabilized as an added advantage. The results obtained with two batches of pure wool yarns suggest that there is potential to achieve yarn hairiness reduction of up to 60 % with minimum deterioration in hairiness even after subsequent rewinding.

Investigation of yarn hairiness

Yarn hairiness affects not only the quality of products, but also the productivity in spinning and weaving. Too much yarn hairiness is undesirable for many end uses as well as the spinning and post spinning processes. The main aims of this project are to examine the hairiness features of various yarns and to reduce yarn hairiness. The thesis covers five related areas – hairiness assessment, factors affecting yarn hairiness, the hairiness of newly developed yarns, yarn hairiness reduction, and effect of yarn hairiness on the energy consumption in ring spinning. The worsted cashmere, pure wool and wool/cashmere blend yarns were employed to investigate the effect of some fibre parameters on the yarn hairiness. A single exponential distribution of the hair-length was confirmed first, using the data from the Zweigle G565 Hairiness Meter. A linear relationship was observed between the blend ratio and the hairiness indexes. In particular, the effect of fibre crimp or curvature on yarn hairiness is examined. The theory of yarn hairiness composition was also developed further. The effect of draft ratio and spindle speed on the hairiness of worsted wool yarn was examined next with a factorial experiment design. Several new hairiness indexes, namely the relative hairiness indexes, have been used to explain the results obtained. In the investigation of the hairiness of newly developed yarns, the hairiness of the Compact Spun and Roller-Jet-Spun yarns was examined first. The composition of the yarn hairiness, the hair-length distribution, and the effect of test speed on yarn hairiness were then studied. An important finding is that for both yarns, the predominant hairiness feature is the looped hairs. A comparison of the hairiness of Solospun yarns and the equivalent ring spun wool yarns was undertaken. The hair-length distribution of the Solospun yarn was examined first. The Solospun yarns used had fewer hairs in most hair-length groups and lower variations in hairiness. In addition, the effect of twist level and spindle speed on the hairiness of Solospun and conventional ring spun yarns has also been discussed. A novel approach of reducing yarn hairiness – spinning with a ‘Diagonal’ yarn path was examined next. Both ‘Left Diagonal’ and ‘Right Diagonal’ yarn arrangements were studied. A new finding is that the ‘Right Diagonal’ yarn path leads to reduced hairiness for the Z-twist yarn, while yarn evenness and tenacity are not as sensitive to the modified yarn path. The mechanism of hairiness reduction with the ‘Diagonal’ yarn path has been discussed. The spinning performance of “Right Diagonal” yarn arrangement has also been evaluated. Finally, the effect of yarn hairiness on the energy consumption in ring spinning has been investigated theoretically and experimentally. A theoretical model has been developed, which represents the first attempt at theoretically investigating the influence of yarn hairiness on energy consumption during the winding stage of ring spinning. The experimental results have generally confirmed predictions of this model. Recommendations for further research in this area have also been made in the concluding chapter of this thesis.

Diet and habitat of the powerful owl (Ninox strenua) living near Melbourne

The diet of Powerful Owls (Ninox strenua) living at Christmas Hills, 35km north-east of Melbourne was examined by analysis of 686 regurgitated pellets collected over two years. An aid was also developed to help identify potential mammalian prey species based on hair and skeletal characteristics. The following features were found to be most useful in distinguishing between the three species of arboreal marsupials - Common Ringtail Possum (Pseudocheirus peregrinus), Common Brushtail Possum (Trichosurus vulpecula) and Sugar Glider (Petaurus breviceps): - Cross-sectional width of primary guard hairs. - The size and shape of the nasal, frontal, parietal and squamosal bones of the skull. - Dentition. The size and shape of the upper incisor, canine and premolar teeth. The size and shape of the lower incisor and premolar teeth. - The size of the humerus. The Sugar Glider has a much smaller humerus than that of the Common Ringtail Possum and the Common Brushtail Possum. In the Common Brushtail Possum the entepicondyle ends in a very sharp point but the Common Ringtail Possum this point is not as sharp. - The Common Ringtail Possum’s femur has a very prominent trochanter which projects further than that in the Common Brushtail Possum. The femur of the Sugar Glider is distinguished by having a very large depression between the condyle and the trochanter. - The Common Brushtail Possum’s scapula has a narrower lower blade (relative to length) than that in the Common Ringtail Possum. The scapula of the Sugar Glider is smaller in size than that of the other two possums.The pelvic girdle Of the Common Brushtail Possum has a much wider ischium than those of the Common Brushtail Possum and the Sugar Glider. The ilium of the Sugar is much narrower and smaller than that of the other two possums Mammalian prey was found in 89%, insects in 13% and birds in 10% of the pellets. Of the mammals, Common Ringtail Possums occurred most frequently in the pellets over the year. There was no seasonal difference in the frequency of occurrence of Common Ringtail Possums and Sugar Gliders in pellets. However, Common Brushtail Possums were more likely to be taken in spring than in the other seasons. More adult Common Ringtail Possums were taken as prey than were other age classes over the year, except in summer when high numbers of young were consumed by the owls. The habitat of the Powerful Owl was examined by ground surveys and spotlight surveys in sixteen sites within the Warrandyte-Kinglake Nature Conservation Link. Four categories of survey sites were chosen with the following features. Category A - Sites with a dense understorey of shrubs and small trees, as well as many old trees (>10/ha) which might be suitable for nest hollows. Category B - Sites which lacked a dense understorey of shrubs and small trees and containing few or no old trees suitable for nest hollows. Category C - Sites with a dense understorey of shrubs and small trees but containing few or no old trees suitable for nest hollows. Category D - Sites which lacked a dense understorey of shrubs and small trees but having old trees (>10/ha) which might be suitable for nest hollows. High prey densities strongly correlated with the presence of hollows at these sites. In the light of the results, management recommendations were made for the future conservation of the Powerful Owls living at Christmas Hills. The following recommendations were particularly important: 1. Cleared or semi - cleared land within the Warrandyte Kinglake Nature Conservation Link be revegetated using indigenous species of eucalypts and waffles in order to provide a contiguous native forest corridor for the movement of possums and gliders between the Yarra River Valley and the Kinglake Plateau. 2. Continued planting of Eucalyptus spp. and Acacia spp. in the forested areas of the Warrandyte-Kinglake Nature Conservation Link. 3. Continued protection of healthy living trees to provide a continuous supply of hollow trees. 4. No falling of dead standing trees for firewood collecting as these can provide nest hollows for prey species of the Powerful Owl.

Processing and quality of cashmere tops for ultra-fine wool worsted blend fabrics

This study has focussed on three main areas. First, an evaluation of the physical attributes of cashmere tops available to commercial spinners; second, the influence of processing variables on the efficiency of producing cashmere tops from raw Australian cashmere; and third, the influence of design of cashmere ultrafine wool blends on the fibre curvature of tops. Testing the physical attributes of cashmere tops from traditional and new sources of supply, was followed by statistical analyses based on factors of origin, processor and other determinants. The analyses demonstrated important processor effects and also that cashmere from different origins shows commercially important variations in fibre attributes. It was possible to efficiently produce Australian cashmere tops with Hauteur, tenacity, extension, softness and residual guard hairs quality attributes equivalent to those observed in the best cashmere tops. The blending of cashmere with wool resulted in a reduction of the mean fibre curvature of the blend compared with the unblended wool. The present work demonstrated that the fibre curvature properties of blended low crimp ultrafine wool tops were closer to the properties of pure cashmere tops than were tops made from blended standard high crimp ultrafine wool. The attributes of textiles made from the relatively rare Australian low curvature cashmere could enhance the marketability of both Australian cashmere and low curvature wool.

Adhesion performance of polymer nanofibres under shear loading

Geckos have extraordinary wall-climbing ability because of the millions of hairs with micro/nano fibrillar structures on their feet. Mimicking gecko's feet is of scientific and engineering importance for development of physical adhesion materials and devices. The design of gecko-inspired physical adhesives seems to be geometry dominated. In this study, Finite Element Method (FEM) has been used to analyse the vertical peel-off force of polyporpylene (PP) nanofibres having different fibre dimensions, inclining angels and contact areas on a flat glass substrate. It has been found that the main parameters affecting the frictional adhesion are fibre diameter and fibre aspect ratio, the inclining angle between the fibre and the substrate surface, and the intimate contact areas. Our analysis has shown that PP nanofibres with a diameter of less than 200nm can generate less peel-off force than fibres of larger diameters, indicating more stable adhesion with the glass substrate for thinner fibres. A bent fibre with more intimate contact area can bear more shear force than a straight fibre with less contact area. Also, under the same shear loading, fibres with an inclining angle of less than 30° provide a low peel off force.

Modelling and rendering techniques for African hairstyles

We develop or enhance hair modelling and rendering techniques to produce three different forms of hair commonly found in African hairstyles. The forms of hair are natural curly hair, straightened hair, and braids or twists of hair.

We use an implicit model, implemented as a series of textured layers to represent curly hair. Straightened hair is represented explicitly, and modelled by defining and replicating a few control hairs. Braids and twists are implemented as textured generalized cylinders.

A synthesis of existing hair illumination models is used as a basis for an African hair illumination model. Parameter values to match African hair characteristics are discussed.

A number of complete African hairstyles are shown, demonstrating that the techniques can be used to model and render African hair successfully.

A lightwave 3d plug-in for modelling long hair on virtual humans

Multimedia applications today make use of virtual humans. Generating realistic virtual humans is a challenging problem owing to a number of factors, one being the simulation of realistic hair. The difficulty in simulating hair is due to the physical properties of hair. The average human head holds thousands of hairs, with the width of each hair often smaller than the size of a pixel. There are also complex lighting effects that occur within hair. This paper presents a LightWave 3D plug-in for modeling thousands of individual hairs on virtual humans. The plug-in allows the user to specify the length, thickness and distribution of the hair, as well as the number of segments a hair is made up of. The plug-in is able to add hairs to a head model, which the user then modifies to define a hairstyle. The hairs are then multiplied by the plug-in to produce many hairs. By providing a plug-in that does most of the work and produces realistic results, the user is able to produce a hairstyle without modeling each individual strand of hair. This greatly reduces the time spent on hair modeling, and makes the possibility of adding realistic long hair to virtual humans reasonable.

Review on fabrication and applications of ultrafine particles from animal protein fibres

Protein fibre wastes from animal hairs, feathers and insect secreted filaments can be aptly utilized by converting them into ultra-fine particles. Particles from animal protein fibres present large surface-to-weight ratio and significantly enhanced surface reactivity, that have opened up novel applications in both textile and non-textile fields. This review article summarizes the state-of-the-art routes to fabricate ultrafine particles from animal protein fibres, including direct route of mechanical milling of fibres and indirect route from fibre proteins. Ongoing research trends in novel applications of protein fibre particles in various fields, such as biomedical science, environmental protection and composite structures are presented. © 2014 The Korean Fiber Society and Springer Science+Business Media Dordrecht.