Chemiluminescence detector with a serpentine flow cell

We present a new chemiluminescence detector, with solution channels that have been machined into a Teflon disk and sealed with a sapphire window. The configuration of the flow cell can be conveniently modified by replacing the Teflon disk. A comparison of some existing and novel designs, using the chemiluminescence reaction of morphine with acidic potassium permanganate and the bioluminescence reaction of ATP with the commercially available “BacTiter-Glo” reagent, has revealed that a serpentine channel allows greater quantities of light to be captured than a spiral channel, due to more efficient mixing of the analyte and reagent solutions within the cell.

Development and application of a microelectrode based scanning voltammetric detector

A large part of the work presented in this thesis describes the development and use of a novel electrochemical detector designed to allow the electrochemical characterisation of compounds in flowing solution by means of cyclic voltammetry. The detector was microprocessor controlled, which provides digital generation of the potential waveform and collection of data for subsequent analysis. Microdisk working electrodes are employed to permit both thermodynamic and kinetically controlled processes to be studied under steady-state conditions in flowing solutions without the distortion or hysteresis normally encountered with larger sized electrodes. The effect of electrode size, potential scan rate, and solution flow rate are studied extensively with the oxidation of ferrocene used as an example of a thermodynamically controlled process and a series of catecholamines as examples of a kinetically controlled process. The performance of the detector was best demonstrated when used as a HPLC post-column detector. The 3-dimensional chromatovoltammograms obtained allow on-line characterisation of each fraction as it elutes from the column. The rest of the work presented in this thesis involves the study of the oxidative degradation pathway of dithranol. The oxidative pathway was shown to involve a complex free radical mechanism, dependent on the presence of both oxygen and, in particular light. The pathway is further complicated by the fact that dithranol may exist in either a keto or enol form, the enol being most susceptible to oxidation. A likely mechanism is proposed from studies performed with cyclic voltammetry and controlled potential electrolysis, then defined by subsequent kinetic studies.

Qualitative and quantitative analysis of lipid classes in fish oils by thin-layer chromatography with an Iatroscan flame Ionization detector (TLC-FID) and liquid chromatography with an evaporative light scattering detector (LC-ELSD)

Combined effects of hydrogen and air flow rates on the peak response of selected neutral lipid classes (triacylglycerol, diacylglycerol, monoacylglycerol, free fatty acids, and ethyl esters) were studied to optimize and calibrate the Iatroscan Mk-6s Chromarod system for the qualitative and quantitative analysis of lipid classes by thin-layer chromatography (TLC) with flame ionization detection in fish oil during the transesterification process. Air flow rate of 2 L/min, hydrogen flow rate of 150-160 mL/min, and scan rate of 30 s/rod were found to be the optimum conditions. All samples were also analyzed by high performance liquid chromatography (HPLC) with evaporative light scattering detection. Quantitative results obtained by TLC with the flame ionization detection method were comparable to those obtained from HPLC with evaporative light scattering detection.

The dissimilarity corner detector

We present a corner detector that works by using dissimilarity along the contour direction to detect curves in the image contour. The operator is fast, robust to noise and almost self-thresholding. The standard deviation of the image noise must be specified, but this value is easily measured and the explicit modeling of image noise contributes to the robustness of the operator to noise. We also present a new interpretation of the Kitchen-Rosenfeld corner operator (1982) in which we show that this operator can also be viewed as the second derivative of the image function along the edge direction.

A novel alcohol detector based on ZrO2-doped SnO2 electrospun nanofibers

To overcome the interference of acetone when detecting alcohol, a novel alcohol detector based on zirconia-doped SnO2 nanofibers were fabricated through electrospinning technique and calcination process. The samples have been characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and their gas sensing properties have also been investigated. When exposed to alcohol vapor, the nanofibers containing 15 mol% zirconia exhibit the best sensing properties. Moreover, the sensor holds the successful discrimination between acetone and alcohol, which makes our product a good candidate in fabricating highly selective sensors in practice.

Feature extraction and classification of metal detector signals using the wavelet transform and the fuzzy ARTMAP neural network

In this paper, the Fuzzy ARTMAP (FAM) neural network is used to classify metal detector signals into different categories for automated target discrimination. Feature extraction of the metal detector signals is conducted using a wavelet transform technique. The FAM neural network is then employed to classify the extracted features into different target groups. A series of experiments using individual FAM networks and a voting FAM network is conducted. Promising classification accuracy rates are obtained from using individual and voting FAM networks, respectively. The experimental outcomes positively demonstrate the effectiveness of the generated features, and of the FAM network in classifying metal detector signals for automated target discrimination tasks.

Red-green-blue electrogenerated chemiluminescence utilizing a digital camera as detector

Exploiting the distinct excitation and emission properties of concomitant electrochemiluminophores in conjunction with the inherent color selectivity of a conventional digital camera, we create a new strategy for multiplexed electrogenerated chemiluminescence detection, suitable for the development of low-cost, portable clinical diagnostic devices. Red, green and blue emitters can be efficiently resolved over the three-dimensional space of ECL intensity versus applied potential and emission wavelength. As the relative contribution ratio of each emitter to the photographic RGB channels is constant, the RGB ECL intensity versus applied-potential curves could be effectively isolated to a single emitter at each potential.