Microclimatic modeling of the urban thermal environment of Singapore to mitigate urban heat island

This study investigates the urban heat island effect in Singapore and examines the key factors causing this effect. The possibilities of improving heat extraction rate by optimizing air flow in selected hot spots were explored. The effect of building geometry, façade materials and the location of air-conditioning condensers on the outdoor air temperature was explored using computational fluid dynamics (CFD) simulations. It was found that at very low wind speeds, the effect of façade materials and their colours was very significant and the temperature at the middle of a narrow canyon increased up to 2.5 °C with the façade material having lower albedo. It was also found that strategically placing a few high-rise towers will enhance the air flow inside the canyon thereby reducing the air temperature. Adopting an optimum H/W ratio for the canyons increased the velocity by up to 35% and reduced the corresponding temperature by up to 0.7 °C.

Evolution towards a new LSPR particle : Nano-sinusoid

This paper proposes a novel nano-sinusoid particle to be employed in enhanced localized surface plasmon resonance (LSPR) bio-sensing devices. Numerical investigations are carried out to demonstrate advantages offered by the proposed nano-particle on LSPR enhancement over other nano-particles including noble nano-triangles and nano-diamonds. Although nano-triangles exhibit high concentration of the electric field near their tips, when illuminated with a light polarized along the tip axis, they present only one hot spot at the vertex along the polarization direction. To create a structure with two hot spots, which is desired in bio-sensing applications, two nano-triangles can be put back-to-back. Therefore, a nano-diamond particle is obtained which exhibits two hot spots and presents higher enhancements than nano-triangles for the same resonant wavelength. The main drawback of the nano-diamonds is the fluctuation in their physical size-plasmon spectrum relationships, due to a high level of singularity as the result for their four sharp tip points. The proposed nano-sinusoid overcomes this disadvantage while maintaining the benefits of having two hot spots and high enhancements.

Investigation on localized surface plasmon resonance of different nano-particles for bio-sensor applications

This paper proposes a novel sinusoidal shape nano-particle employed in localized surface plasmon resonance (LSPR) devices. Numerical modeling demonstrates advantages offered by the proposed nano-sinusoid on LSPR enhancement against other nano-particles including noble nano-triangles and nano-diamonds. Although nano-triangles exhibit high concentration of the electric field near their tips, when illuminated with a light polarized along the tip axis, they present only one hot spot at the vertex along the polarization direction. To create a structure with two hot spots, which is desired in bio-sensing applications, two nano-triangles can be put back-to-back. Therefore, a nano-diamond particle is obtained which exhibits two hot spots and presents higher enhancements than nano-triangles for the same resonant wavelength. The main drawback of the nano-diamonds is the fluctuation in their physical size-plasmon spectrum relationships, due to a high level of singularity as the result for their four sharp tip points. The proposed nano-sinusoid overcomes this disadvantage while maintaining the benefits of having two hot spots and high enhancements.

Localized surface plasmon resonance: nano-sinusoid arrays

A new nano-sinusoid shape has recently been proposed, which offers the advantage of more resonance wavelength tunability than that offered by other sharp-tip nano-particles. In this paper, a one-dimensional (1D) chain of the nano-sinusoids is modelled, and results are compared with those describing chains of nano-triangles and nano-diamonds. It is demonstrated that the chain of nano-sinusoids provides more enhancement at hot spots than other examined nano-particle shapes. This enhancement is analytically quantified using the coupling constant values used in the electrostatic eigenmode method for analytically solving Maxwell's equations for the nano-plasmonic devices. In addition, investigating LSPR spectrum of two-dimensional (2D) arrays of NPs demonstrates existence of enhanced surface electric fields on hot spots of the outer rows of the array.

Meta-analysis of movements in Atlantic leatherback turtles during the nesting season : conservation implications

Despite decades of conservation efforts on the nesting beaches, the critical status of leatherback turtles shows that their survival predominantly depends on our ability to reduce at-sea mortality. Although areas where leatherbacks meet fisheries have been identified during the long distance movements between 2 consecutive nesting seasons, hot-spots of lethal interactions are still poorly defined within the nesting season, when individuals concentrate close to land. Here we report movements of satellite-tracked gravid leatherback turtles during the nesting season in Western Central Africa, South America and the Caribbean Sea, which account for about 70% of the world population. We show that during and at the end of the nesting season, leatherback turtles have the propensity to remain over the continental shelf, yet sometimes perform extended movements and may even nest in neighbouring countries. Leatherbacks exploit coastal commercial fishing grounds and face substantial accidental capture by regional coastal fisheries (e.g. at least 10% in French Guiana). This emphasises the need for regional conservation strategies to be developed at the ocean scale—both at sea and on land—to ensure the survival of the last leatherback turtles.

Cellulose nanofibre textured SERS substrate

Poor reproducibility limits the wide uptake of low-cost surface enhanced Raman spectroscopy (SERS) substrates. This study reports a relatively low-cost and reproducible cellulose nanofibre (CNF) textured SERS substrate. Utilizing a layer of CNFs deposited onto glass slides, nanoscale roughness was achieved, which facilitated effective aggregation of gold nanoparticles (AuNPs) to form a novel CNF textured SERS substrate. This substrate meets the critical roughness requirements to control the distribution of AuNPs to provide 'hot spots' for SERS detection, offering significant signal enhancement. The reproducibility and accuracy of low-cost cellulosic SERS substrates were significantly improved on a model SERS molecule of 4-aminothiophenol.

The effect of deformation twinning on stress localization in a three dimensional TWIP steel microstructure

We present an investigation of the effect of deformation twinning on the visco-plastic response and stress localization in a low stacking fault energy twinning-induced plasticity (TWIP) steel under uniaxial tension loading. The three-dimensional full field response was simulated using the fast Fourier transform method. The initial microstructure was obtained from a three dimensional serial sectionusing electron backscatter diffraction. Twin volume fraction evolution upon strain was measured so the hardening parameters of the simple Voce model could be identified to fit both the stress-strain behavior and twinning activity. General trends of texture evolution were acceptably predicted including the typical sharpening and balance between the 1 1 1 fiber and the 1 0 0 fiber. Twinning was found to nucleate preferentially at grain boundaries although the predominant twin reorientation scheme did not allow spatial propagation to be captured. Hot spots in stress correlated with the boundaries of twinned voxel domains, which either impeded or enhanced twinning based on which deformation modes were active locally.

Utilisation of intensive foraging zones by female Australian fur seals

Within a heterogeneous environment, animals must efficiently locate and utilise foraging patches. One way animals can achieve this is by increasing residency times in areas where foraging success is highest (area-restricted search). For air-breathing diving predators, increased patch residency times can be achieved by altering both surface movements and diving patterns. The current study aimed to spatially identify the areas where female Australian fur seals allocated the most foraging effort, while simultaneously determining the behavioural changes that occur when they increase their foraging intensity. To achieve this, foraging behaviour was successfully recorded with a FastLoc GPS logger and dive behaviour recorder from 29 individual females provisioning pups. Females travelled an average of 118 ± 50 km from their colony during foraging trips that lasted 7.3 ± 3.4 days. Comparison of two methods for calculating foraging intensity (first-passage time and first-passage time modified to include diving behaviour) determined that, due to extended surface intervals where individuals did not travel, inclusion of diving behaviour into foraging analyses was important for this species. Foraging intensity 'hot spots' were found to exist in a mosaic of patches within the Bass Basin, primarily to the south-west of the colony. However, the composition of benthic habitat being targeted remains unclear. When increasing their foraging intensity, individuals tended to perform dives around 148 s or greater, with descent/ascent rates of approximately 1.9 m•s-1 or greater and reduced postdive durations. This suggests individuals were maximising their time within the benthic foraging zone. Furthermore, individuals increased tortuosity and decreased travel speeds while at the surface to maximise their time within a foraging location. These results suggest Australian fur seals will modify both surface movements and diving behaviour to maximise their time within a foraging patch.

Estimating the in-vivo HIV template switching and recombination rate

BACKGROUND: HIV recombination has been estimated in vitro using a variety of approaches, and shows a high rate of template switching per reverse transcription event. In-vivo studies of recombination generally measure the accumulation of recombinant strains over time, and thus do not directly estimate a comparable template switching rate. METHOD: To examine whether the estimated in-vitro template switching rate is representative of the rate that occurs during HIV infection in vivo, we adopted a novel approach, analysing single genome sequences from early founder viruses to study the in-vivo template switching rate in the env region of HIV. RESULTS: We estimated the in-vivo per cycle template switching rate to be between 0.5 and 1.5/1000 nt, or approximately 5-14 recombination events over the length of the HIV genome. CONCLUSION: The in-vivo estimated template switching rate is close to the in-vitro estimated rate found in primary T lymphocytes but not macrophages, which is consistent with the majority of HIV infection occurring in T lymphocytes.

Boron nitride nanosheet-veiled gold nanoparticles for surface-enhanced raman scattering

Atomically thin boron nitride (BN) nanosheets have many properties desirable for surface-enhanced Raman spectroscopy (SERS). BN nanosheets have a strong surface adsorption capability toward airborne hydrocarbon and aromatic molecules. For maximized adsorption area and hence SERS sensitivity, atomically thin BN nanosheet-covered gold nanoparticles have been prepared for the first time. When placed on top of metal nanoparticles, atomically thin BN nanosheets closely follow their contours so that the plasmonic hot spots are retained. Electrically insulating BN nanosheets also act as a barrier layer to eliminate metal-induced disturbances in SERS. Moreover, the SERS substrates veiled by BN nanosheets show an outstanding reusability in the long term. As a result, the sensitivity, reproducibility, and reusability of SERS substrates can be greatly improved. We also demonstrate that large BN nanosheets produced by chemical vapor deposition can be used to scale up the proposed SERS substrate for practical applications.

Thermoregulation in young athletes exercising in hot environments.

Children are less efficient thermoregulators than are adults. During exercise, sweat evaporation is the most important physiological means of cooling the body. The sweat response in children, however, is less efficient than in adults, so children dissipate less heat though evaporative sweating and more through convection (the loss of heat through the skin) plus radiation. Children and adolescents with high levels of body fat and heavy builds are more susceptible to heat stress because they dissipate body heat less efficiently. Maintaining adequate hydration is crucial for preventing heat stress, Although water is often described as the best choice of fluid, studies on voluntary drinking habits and flavor preferences in children and adolescents suggest that greater consumption occurs when sports drinks are offered instead of water. Although a child's sweat contains less sodium and chloride than an adult's does, there appears to be no evidence that a child's performance improves when given beverages more diluted than those currently recommended for adults, More information is necessary to identify the optimal electrolyte and carbohydrate content of sports drinks for young athletes.

The generation of new high-angle boundaries in aluminium during hot torsion

The crystallographic rotation field for deformation in torsion is such that it is possible for orientations close to stable orientations to rotate away from the stable orientation. A Taylor type model was used to demonstrate that this phenomenon has the potential to transform randomly generated low-angle boundaries into high-angle boundaries. After imposing an equivalent strain of 1.2, up to 40% of the simulated boundaries displayed a disorientation in excess of 15°. These high-angle boundaries were characterised by a disorientation axis close to parallel with the sample radial direction. A series of hot torsion tests was carried out on 1050 aluminium to seek evidence for boundaries formed by this mechanism. A number of deformation-induced high-angle boundaries were identified. Many of these boundaries showed disorientation axes and rotation senses similar to those seen in the simulations. Between 10% and 25% of all the high-angle boundary present in samples twisted to equivalent strains between 2 and 7 could be attributed to the present mechanism.

Ultrafine grained ferrite formed by interrupted hot torsion deformation of plain carbon steel

A plain carbon steel was deformed using a hot torsion deformation simulator. A schedule known to produce strain-induced ferrite was used with the strain interrupted for increasing intervals of time to determine the effect of an isothermal hold on the final microstructure. Microscopy and electron back-scattered diffraction (EBSD) were used to analyse the changes that occurred in the partially transformed microstructure during the hold and the subsequent applied strain. The strain-induced ferrite coarsened during the hold and this coarsened ferrite was refined during the second deformation. These results were compared to those obtained for a different plain carbon steel deformed in single pass rolling close to the Ar3 temperature.