Aggregation, ageing and transport properties of surface modified fumed silica dispersions

We have investigated the aggregation, ageing and transport properties of surface modified silica dispersions in DMSO by photon correlation spectroscopy and conductivity measurements. The surface modification introduces Li+-ions that dissociate in the dispersion creating a single Li+-ion conducting electrolyte. We show that the surface modification changes the aggregation and ageing properties of the material. There is a pronounced ageing observed for the modified silica dispersions. At high concentrations of fumed silica a gel state is found, which in the case of the surface modified silica is a very weak gel that can be rejuvenated by ultrasonic treatment. The key parameter controlling the aggregation in this system is hydrogen bonding and the surface modification results in a very low number of sites for hydrogen bonding. In addition there is a contribution from repulsive electrostatic interactions in the surface modified silica dispersions due to the highly charged surfaces of these particles. Furthermore, the Li+-ion diffusion, at low silica concentration, is three orders of magnitude faster than that of the silica particles and in the gel state the silica particles are immobile. We also find that the Li+-ion diffusion is virtually independent of the silica concentration in the dispersions.

Equilibrium conformational ensemble of the intrinsically disordered peptide n16N: linking subdomain structures and function in nacre

n16 is a framework protein family associated with biogenic mineral stabilization, thought to operate at three key interfaces in nacre: protein/β-chitin, protein/protein, and protein/CaCO3. The N-terminal half of this protein, n16N, is known to be active in conferring this mineral stabilization and organization. While some details relating to the stabilization and organization of the mineral are known, the molecular mechanisms that underpin these processes are not yet established. To provide these molecular-scale details, here we explore current hypotheses regarding the possible subdomain organization of n16N, as related to these three interfaces in nacre, by combining outcomes of Replica Exchange with Solute Tempering molecular dynamics simulations with NMR experiments, to investigate the conformational ensemble of n16N in solution. We verify that n16N lacks a well-defined secondary structure, both with and without the presence of Ca(2+) ions, as identified from previous experiments. Our data support the presence of three different, functional subdomains within n16N. Our results reveal that tyrosine, chiefly located in the center of the peptide, plays a multifunctional role in stabilizing conformations of n16N, for intrapeptide and possibly interpeptide interactions. Complementary NMR spectroscopy data confirm the participation of tyrosine in this stabilization. The C-terminal half of n16N, lacking in tyrosine and highly charged, shows substantive conformational diversity and is proposed as a likely site for nucleation of calcium carbonate. Finally, dominant structures from our predicted conformational ensemble suggest the presentation of key residues thought to be critical to the selective binding to β-chitin surfaces.

Exploring the role of personality and resilience in the stress response: a comparison of military and civilian samples

In the context of emergency services and first responders (i.e. military), the ability to select personnel who have the innate ability to work well in highly charged environments would be advantageous. While there have been some efforts to explore the relationship between personality traits and physiological reactivity in the context of the emergency services, differences in stress responses between civilians and military personnel have not yet been investigated. Therefore the aim of the current study was to examine the relationship between personality, resilience and physiological stress responses. Fifteen civilians and 16 military personnel completed online personality (IPIP) and resilience (CD-RISC) inventories prior to commencing the experimental component of the study. The Mannheim Multi-component Stress Test (MMST) which utilises cognitive, audio, visual and motivational components was employed to elicit an acute stress response. Measures of correct responses and reaction time were sampled during the MMST. Prior to and following exposure to the MMST, positive and negative affect were measured (PANAS), and heart rate was sampled continuously across the study period. Results indicated that Military participants rated significantly lower than civilians on neuroticism; however there were no differences between groups for resilience or any of the other personality traits. Military participants displayed less emotional reactivity and less negative affect following the MMST testing period, and appeared to perform better on the MMST when compared to the civilian sample. However, there was no significant difference in heart rate measures between groups. Collectively, these results provide support for the broaden and buildhypothesis and the transactional stress theory. The results also build on previous empirical stress literature and support the effectiveness of the MMST in laboratory induced stress. Suggestions for future research in the area of resiliency and stress will be discussed. From an applied context, further research in this area may assist in military recruitment processes to place individuals in roles to which they are most suited within the Defence Force.

Introduction

As liquid media at a temperature less than 100 °C that possess some level of ionic conductivity, it is immediately of interest to consider the use of ionic liquids (ILs) as electrolytes to carry out electrochemical processes. This has of course the origins of the modern era of interest in ionic liquids via the work of Wilkes and coworkers in the 1990s [1]. Applications in electrowinning and electrodeposition have developed including processes for a range of metals from copper and zinc to lithium and aluminium [2]. Some metals such as titanium remain, however, stubbornly difficult to electrodeposit [3]. A range of applications in electrochemical devices, including batteries, fuel cells, and solar cells have also emerged and are being thoroughly discussed in Volume 2 (Electrochemistry in ionic liquids. Applications). In parallel to this, there has emerged the need to understand more in detail some important fundamental concepts of electrochemistry as well as the interest on fundamental electrochemical process taking place in an ionic liquid medium and in identifying the ways in which the processes differ, or not, from conventional solvent systems as a result of the highly charged medium [4–6]. Thereby, in this book, special emphasis is placed on showing which aspects of electrochemistry in ionic liquids are different from electrochemistry in conventional solutions. Furthermore, new electrochemical concepts and theories are presented. The book commences with a deep and comprehensive discussion on electrode/electrolyte interface reactions, interface structure, and its critical properties for all electrochemical applications. Chapter 2 discusses these fundamental concepts along with some in situ techniques, such as electrochemical impedance and Fourier transform infrared spectroscopy, cyclic voltammetry, and electrochemical quartz crystal microbalance, suitable for the characterization of electrode/IL interfaces.

A new Lewis-base ionic liquid comprising a mono-charged diamine structure : a highly stable electrolyte for lithium electrochemistry

A new Lewis-base ionic liquid (IL) based on mono-charged 1,4-diazabicyclo[2.2.2]octane (dabco) was synthesized and its thermal and electrochemical behaviour was characterized. The dabco-based IL with bis(trifluoromethanesulfonyl)amide (TFSA) anion melts at 76 °C when the N-substituted alkyl chain length is 2. The dabco-based IL showed a wide electrochemical window of over 4 V ranging from −3.5 to +1.5 V vs. Fc/Fc⁺ and was able to deposit and strip lithium from a nickel substrate at reasonable efficiency.

The influence of geometry and wall character of pores on the permeation of ions and water through desalination membranes

The transport of water and ions across mimicked nanotube membranes with pseudo atoms is studied using molecular dynamics simulations under equilibrium conditions and hydrostatic pressure. Different pore surface properties are constructed by assigning partial charges on the sites of specified atoms to explore the influence of charges and polarity. The energetics of water and ion transports through the nanopores was calculated to evaluate their filterability to water. The simulation results show that the free energy barriers to water and ion conductions much depend on the charges at the pore entrance and the dipole within the pore. The membranes with hydrophobic pores and negatively charged entrances would be very efficient in the water transport and ion rejection. The charges and dipoles of the pore wall and the aligned dipoles of water molecules in the pore can create a significant force on ions.

Molecular dynamics simulations of highly concentrated salt solutions : structural and transport effects in polymer electrolytes

Structural, thermodynamic and transport properties have been calculated in concentrated non-aqueous NaI solutions using molecular dynamics simulations. Although the solvent has been represented by a simplistic Stockmayer fluid (spherical particles with point dipoles), the general trends observed are still a useful indication of the behavior of real non-aqueous electrolyte systems. Results indicate that in low dielectric media, significant ion pairing and clustering occurs. Contact ion pairs become more prominent at higher temperatures, independent of the dielectric strength of the solvent. Thermodynamic analysis shows that this temperature behavior is predominantly entropically driven. Calculation of ionic diffusivities and conductivities in the NaI/ether system confirms the clustered nature of the salt, with the conductivities significantly lower than those predicted from the Nernst-Einstein relation. In systems where the solvent-ion interactions increase relative to ion-ion interactions (lower charge or higher solvent dipole moment), less clustering is observed and the transport properties indicate independent motion of the ions, with higher calculated conductivities. The solvent in this system is the most mobile species, in comparison with the polymer electrolytes where the solvent is practically immobile.

Ionic conductivity of polymer gels deriving from alkali metal ionic liquids and negatively charged polyelectrolytes

We have prepared polymer gel electrolytes with alkali metal ionic liquids (AMILs) that inherently contain alkali metal ions. The AMIL consisted of sulfate anion, imidazolium cation, and alkali metal cation. AMILs were mixed directly with poly(3-sulfopropyl acrylate) lithium salt or poly(2-acrylamido-2-methylpropanesulfonic acid) lithium salt to form polymer gels. The ionic conductivity of these gels decreased with increasing polymer fraction, as in general ionic liquid/polymer mixed systems. At low polymer concentrations, these gels displayed excellent ionic conductivity of 10⁻⁴ to 10⁻³ S cm⁻¹ at room temperature. Gelation was found to cause little change in the ⁷Li diffusion coefficient of the ionic liquid, as measured by pulse-field-gradient NMR. These data strongly suggest that the lithium cation migrates in successive pathways provided by the ionic liquids.

Highly concentrated salt solutions : molecular dynamics simulations of structure and transport

Molecular dynamics (MD) simulations in NaI solutions, where the solvent has been represented by the Stockmayer fluid, were performed as a function of temperature, salt concentration, and solvent dipole strength. At higher temperatures contact ion pairs become more prevalent, regardless of solvent strength. An examination of the temperature dependence of the potential of mean force demonstrates the entropic nature of this effect. The transport properties calculated in the simulations are dependent on the balance between solvent dielectric constant and ion charge. In systems with a large solvent dipole moment, the ions appear to be independently mobile, and deviations from Nernst–Einstein behavior are small. In systems of smaller solvent dipole moment or greater ion charge, the ions form clusters, and large deviations from Nernst–Einstein behavior are observed.

Removal of copper ions from aqueous solution by adsorption onto novel polyelectrolyte film-coated nanofibrous silk fibroin non-wovens

In this approach, polyelectrolyte film-coated nanofibrous silk fibroin (SF) nonwovens were prepared from the alternate deposition of positively charged polyethylenimine (PEI) and negatively charged SF using electrostatic layer-by-layer (LBL) self-assembled technology. The composite membranes were characterized by scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectrometer. The SF-PEI multilayer-assembled nanofibers (less than five layers) were fine and uniform with the fiber diameter from 400 nm to 600 nm, and had very large surface area and high porosity (more than 70%). The amino groups of PEI were proved to be deposited onto SF nonwovens, which granted the coated nonwovens with potential applicability for copper ions adsorption. The PEI films coated SF substrate showed much higher copper ions adsorption capacity than that of ethanol treated SF nanofibers. Adding the number of PEI coated could enhance the Cu²⁺ adsorption capacity significantly. The maximum milligrams per gram of copper ions adsorbed reached 59.7 mg/g when the SF substrate was coated with 5 bilayers of SF-PEI. However, the copper ions adsorption capacity had no obvious change as the number of PEI continued to increase. These results suggest potential for PEL film-coated nanofibrous nonwovens as a new adsorbent for metal ions.