Information-based regulation of high-velocity foot-targeting tasks

Judging time-to-contact with a target is an important criterion for avoiding harm in everyday walking and running tasks, and maximizing performance in high-velocity sporting tasks. The information-based regulation of step length and duration during target-directed locomotion was examined in relation to gait mode, approach velocity, target task, expertise, and sporting performance during a series of four experiments. The first three experiments examined novice performers (Each n=12, 6 males, 6 females), whilst the last experiment examined expert gymnasts (n=5). Two reference strips with alternating 50cm black and white intervals were placed on either side of the approach strip for all of the experiments. One 50Hz-panning video camera filmed the approach from an elevated position. In Experiment 4, two stationary 250Hz cameras filmed the post-flight performance of the gymnastic vaults and, in addition, two qualified judges provided a performance score for each vaulting trial. The panning video footage in each experiment was digitized to deduce the gait characteristics. In Experiment 4, the high-speed video footage was analyzed three-dimensionally to obtain the performance measures such as post-flight height. The utilization of visual stimulus in target-directed locomotion is affected by the observer's state of motion as characterized by the mode of locomotion and also often the speed of locomotion. In addition, experience plays an important role in the capacity of the observer to utilize visual stimulus to control the muscular action of locomotion when either maintaining or adjusting the step mechanics. The characteristics of the terrain and the target also affect the observer's movement. Visual regulation of step length decreases at higher approach speeds in novice performers, where as expert performers are capable of increasing visual regulation at higher approach speeds. Conservatism in final foot placement by female participants accounts for the observed increase in distance from the critical boundary of the obstacle relative to toe placement. Behavioural effects of gender thus affect the control of final foot placement in obstacle-directed locomotion. The visual control of braking in target-directed locomotion is described by a tau-dot of-0.54. When tau-dot is below -0.54 a hard collision with the obstacle will occur, however, when tau-dot is above -0.54, a soft collision with the target will occur. It is suggested that the tau-dot margin defining the control of braking reveals the braking capacity of the system. In the target-directed locomotion examined a tau-dot greater than -0.70 would possibly exceed the braking capacity of the system, thus, leading to injury if performed. The approach towards the take-off board and vaulting horse in gymnastics is an example of target-directed locomotion in sport. Increased visual regulation of the timing and length of each step is a requirement for a fast running approach, a fundamental building block for the execution of complex vaults in gymnastics. The successful performance of complex vaults in gymnastics leads towards a higher judge's score. Future research suggestions include an investigation of visual regulation of step length in curved target-directed locomotion.

Towards integrated anti-microbial capabilities: Novel bio-fouling resistant membranes by high velocity embedment of silver particles

Biofilm formation on membranes during water desalination operation and pre-treatments limits performance and causes premature membrane degradation. Here, we apply a novel surface modification technique to incorporate anti-microbial metal particles into the outer layer of four types of commercial polymeric membranes by cold spray. The particles are anchored on the membrane surface by partial embedment within the polymer matrix. Although clear differences in particle surface loadings and response to the cold spray were shown by SEM, the hybrid micro-filtration and ultra-filtration membranes were found to exhibit excellent anti-bacterial properties. Poly(sulfone) ultra-filtration membranes were used as for cross-flow filtration of Escherichia coli bacteria solutions to investigate the impact of the cold spray on the material[U+05F3]s integrity. The membranes were characterized by SEM-EDS, FT-IR and TGA and challenged in filtration tests. No bacteria passed through the membrane and filtrate water quality was good, indicating the membranes remained intact. No intact bacteria were found on hybrid membranes, loaded with up to 15. wt% silver, indicating the treatment was lysing bacteria on contact. However, permeation of the hybrid membranes was found to be reduced compared to control non-modified poly(sulfone) membranes due to the presence of the particles across the membrane material. The implementation of cold spray technology for the modification of commercial membrane products could lead to significant operational savings in the field of desalination and water pre-treatments.

Independent and combined effects of exercise and vitamin D on muscle morphology, function and falls in the elderly

Regular exercise, particularly progressive resistance training (PRT), is recognized as one of the most effective strategies to prevent age-related muscle loss (sarcopenia), but its effects on muscle function are mixed. However, emerging data indicates that high velocity PRT (fast concentric muscle contractions) is more effective for improving functional outcomes than traditional PRT. In terms of falls prevention, high-challenging balance training programs appear to be most effective. There is also compelling evidence that supplemental vitamin D is an effective therapeutic option for falls prevention. The findings from a recent meta-analysis revealed that supplemental vitamin D at a dose of at least 700–1,000 IU/d or an achieved serum 25(OH)D level of at least 60 nmol/L was associated with reduced falls risk among older individuals. Based on these findings, it is possible that the combination of exercise and vitamin D could have a synergistic effect on muscle morphology and function, particularly since both interventions have been shown to have beneficial effects on type II “fast twitch” muscle fibers and systemic inflammation, which have both been linked to losses in muscle mass and function. Unfortunately however, the findings from the limited number of factorial 2 × 2 design RCTs indicate that additional vitamin D does not enhance the effects of exercise on measures of muscle morphology, function or falls risk. However, none of these trials were adequately powered to detect a “synergistic” effect between the two treatment strategies, but it is likely that if an exercise-by-vitamin D interaction does exist, it may be limited to situations when vitamin D deficiency/insufficiency is corrected. Further targeted research in “high risk” groups is still needed to address this question, and evaluate whether there is a threshold level of serum 25(OH)D to maximize the effects of exercise on muscle and falls risk.

Osteo-cise : Strong bones for life': protocol for a community-based randomised controlled trial of a multi-modal exercise and osteoporosis education program for older adults at risk of falls and fractures

Background : Osteoporosis affects over 220 million people worldwide, and currently there is no 'cure' for the disease. Thus, there is a need to develop evidence-based, safe and acceptable prevention strategies at the population level that target multiple risk factors for fragility fractures to reduce the health and economic burden of the condition.

Methods : The 'Osteo-cise: Strong Bones for Life' study will investigate the effectiveness and feasibility of a multi-component targeted exercise, osteoporosis education/awareness and behavioural change program for improving bone health and muscle function, and reducing falls risk in community-dwelling older adults at an increased risk of fracture. Men and women aged 60 years or above will participate in an 18-month randomised controlled trial comprising a 12-month structured and supervised community-based program and a 6-month 'research to practise' translational phase. Participants will be randomly assigned to either the 'Osteo-cise' intervention or a self-management control group. The intervention will comprise a multi-modal exercise program incorporating high velocity progressive resistance training, moderate impact weight-bearing exercise and high challenging balance exercises performed three times weekly at local community-based fitness centres. A behavioural change program will be used to enhance exercise adoption and adherence to the program. Community-based osteoporosis education seminars will be conducted to improve participant knowledge and understanding of the risk factors and preventative measures for osteoporosis, falls and fractures. The primary outcomes measures, to be collected at baseline, 6, 12, and 18 months, will include DXA-derived hip and spine bone mineral density measurements and functional muscle power (timed stair-climb test). Secondary outcomes measures include: MRI-assessed distal femur and proximal tibia trabecular bone micro-architecture, lower limb and back maximal muscle strength, balance and function (four square step test, functional reach test, timed up-and-go test and 30-second sit-to-stand), falls incidence and health-related quality of life. Cost-effectiveness will also be assessed.

Discussion : The findings from the Osteo-cise: Strong Bones for Life study will provide new information on the efficacy of a targeted multi-modal community-based exercise program incorporating high velocity resistance training, together with an osteoporosis education and behavioural change program for improving multiple risk factors for falls and fracture in older adults at risk of fragility fracture. Trial Registration: Australian New Zealand Clinical Trials Registry reference ACTRN12609000100291

The effect of lumbosacral manipulation on corticospinal and spinal reflex excitability on asymptomatic participants

Objective The aim of the study was to examine the effects of a high-velocity, low-amplitude (HVLA) manipulation to the lumbosacral joint on corticospinal excitability, as measured by motor evoked potentials (MEPs) using transcranial magnetic stimulation, and spinal reflex excitability, as measured by the Hoffman reflex (H-reflex).

Methods In a randomized, controlled, crossover design, 14 asymptomatic volunteers (mean age, 23 ± 5.4 years; 10 men; 4 women) were measured for MEPs and H-reflexes immediately before and after a randomly allocated intervention. The interventions consisted of HVLA applied bilaterally to the lumbosacral joint and a control intervention. Participants returned a week later, and the same procedures were performed using the other intervention. Data for H-reflex and MEP amplitudes were normalized to the M-wave maximum amplitude and analyzed using 2-way analysis of variance with repeated measures.

Results A significant interaction of treatment by time was found for MEP (F1,13 = 4.87, P = .04), and post hoc analyses showed that the MEP/M-wave maximum ratio decreased significantly in the HVLA treatment (P = .02; effect size, 0.68). For H-reflex, there was a significant effect of time (F1,13 = 8.186, P = .01) and treatment and time interaction (F1,13 = 9.05, P = .01), with post hoc analyses showing that H-reflexes were significantly reduced after the HVLA manipulation (P = .004; effect size, 0.94). There were no significant changes in MEP latency or silent period duration.

Conclusion An HVLA manipulation applied to the lumbosacral joint produced a significant decrease in corticospinal and spinal reflex excitability, and no significant change occurred after the control intervention. The changes in H-reflexes were larger than those in MEPs, suggesting a greater degree of inhibition at the level of the spinal cord.

Modeling of shear ductile fracture considering a changeable cut-off value for stress triaxiality

 A macroscopic ductile fracture criterion is proposed based on micro-mechanism analysis of nucleation, growth and shear coalescence of voids from experimental observation of fracture surfaces. The proposed ductile fracture model endows a changeable cut-off value for the stress triaxiality to represent effect of micro-structures, the Lode parameter, temperature, and strain rate on ductility of metals. The proposed model is used to construct fracture loci of AA 2024- T351. The constructed fracture loci are compared with experimental data covering wide stress triaxiality ranging between –0.5 and 1.0. The comparison suggests that the proposed model can provide a satisfactory prediction of ductile fracture for metals from compressive upsetting tests to plane strain tension with slanted fracture surfaces. Moreover, it is expected that the proposed model reasonably describes ductile fracture behavior in high velocity perforation simulation since a reasonable cut-off value for the stress triaxiality is coupled with the proposed ductile fracture criterion.

The combination of plyometric and balance training improves sprint and shuttle run performances more often than plyometric-only training with children

Because balance is not fully developed in children and studies have shown functional improvements with balance only training studies, a combination of plyometric and balance activities might enhance static balance, dynamic balance, and power. The objective of this study was to compare the effectiveness of plyometric only (PLYO) with balance and plyometric (COMBINED) training on balance and power measures in children. Before and after an 8-week training period, testing assessed lower-body strength (1 repetition maximum leg press), power (horizontal and vertical jumps, triple hop for distance, reactive strength, and leg stiffness), running speed (10-m and 30-m sprint), static and dynamic balance (Standing Stork Test and Star Excursion Balance Test), and agility (shuttle run). Subjects were randomly divided into 2 training groups (PLYO [n = 14] and COMBINED [n = 14]) and a control group (n = 12). Results based on magnitude-based inferences and precision of estimation indicated that the COMBINED training group was considered likely to be superior to the PLYO group in leg stiffness (d = 0.69, 91% likely), 10-m sprint (d = 0.57, 84% likely), and shuttle run (d = 0.52, 80% likely). The difference between the groups was unclear in 8 of the 11 dependent variables. COMBINED training enhanced activities such as 10-m sprints and shuttle runs to a greater degree. COMBINED training could be an important consideration for reducing the high velocity impacts of PLYO training. This reduction in stretch-shortening cycle stress on neuromuscular system with the replacement of balance and landing exercises might help to alleviate the overtraining effects of excessive repetitive high load activities.

Theoretical study of quantum capacitance and associated delay in armchair-edge graphene nanoribbons

This work presents a comprehensive investigation of the quantum capacitance and the associated effects on the carrier transit delay in armchair-edge graphene nanoribbons (A-GNRs) based on semi-analytical method. We emphasize on the realistic analysis of bandgap with taking edge effects into account by means of modified tight binding (TB) model. The results show that the edge effects have significant influence in defining the bandgap which is a necessary input in the accurate analyses of capacitance. The quantum capacitance is discussed in both nondegenerate (low gate voltage) and degenerate (high gate voltage) regimes. We observe that the classical capacitance limits the total gate (external) capacitance in the degenerate regime, whereas, quantum capacitance limits the external gate capacitance in the nondegenerate regime. The influence of gate capacitances on the gate delay is studied extensively to demonstrate the optimization of switching time. Moreover, the high-field behavior of a GNR is studied in the degenerate and nondegenerate regimes. We find that a smaller intrinsic capacitance appears in the channel due to high velocity carrier, which limits the quantum capacitance and thus limit the gate delay. Such detail analysis of GNRs considering a realistic model would be useful for the optimized design of GNR-based nanoelectronic devices.

High current density and drift velocity in templated conducting polymers

Conducting polymers prepared by a templated vapour phase polymerisation process involving solid phase transition metal complexes are found to produce polymers with charge carriers that exhibit maximum drift velocity in the range of 1 m/s. This super-mobility seems to be related to a high degree of ordering in the materials as evidenced by the X-ray diffraction data. This may result from a templated polymerisation process. The high mobility manifests itself as a capacity to sustain very high current densities (>10000 A/cm2); such high current densities are of importance in thin film conductor applications.

Maternal and neonatal influences on, and reproducibility of, neonatal aortic pulse wave velocity

Aortic pulse wave velocity (aPWV), a noninvasive measure of vascular stiffness, is an independent predictor of cardiovascular disease both before and in overt vascular disease. Its characteristics in early life and its relationship to maternal factors have hardly been studied. To test the hypothesis that infant aPWV was positively related to maternal anthropometry and blood pressure (BP) at 28 weeks gestation, after adjusting for neonatal anthropometry and BP, 148 babies born in Manchester were measured 1 to 3 days after birth. A high reproducibility of aPWV, assessed in 30 babies within 3 days of birth, was found with a mean difference between occasions of –0.04 m/s (95% CI: –0.08 to 0.16 m/s). Contrary to our hypothesis, a significant inverse relation was found between neonatal aPWV (mean: 4.6 m/s) and maternal systolic BP (mean: 108.9 mm Hg; r=–0.57; 95% CI: –0.67 to –0.45) but not maternal height nor weight. Neonatal aPWV was positively correlated with birth length, birth weight, and systolic BP. In multiple regression, neonatal aPWV remained significantly inversely associated with maternal systolic BP (adjusted ß coefficient: –0.032; 95% CI: –0.040 to –0.024; P<0.001), after adjustment for maternal age, birth weight, length, and neonatal BP (all independently and positively related to aPWV) and for gestational age, maternal weight, and height (unrelated). These results suggest that infant aPWV may be a useful index of infant vascular status, is less disturbing to measure than infant BP, and is sensitive to the gestational environment marked by maternal BP.

Modelling factors of square tubes in high speed bending situations

Accurate finite element crash simulations of side impact depend upon a thorough understanding of dynamic tube bending. There is a need to understand the dynamic bending mode of square sections (equivalent of automotive structural parts) to obtain a greater confidence in CAE. This work varied strain rate and material definitions, such as Cowper-Symonds vs Zerilli-Armstrong, as well as initial velocity and yield strength. The results show that most of the plastic work is done between strains rates of 30 ¿ 300/s and strains up to 0.3. Peak strain rates were marginally above 1000/s with maximum strain greater than 1. When the strain rate definition and material model were modified, it was shown that a higher yield stress produced a higher reaction force. These results would suggest that the strain rate sensitivity needs to be carefully identified for accurate crash simulations.

High technology nanocomposite fibres: Development of melt spun semi-aromatic polyamide nanocomposite fibres

Novel polyamide nanocomposite fibres have been produced by compounding semi aromatic Poly (m-xylene adipamide) (MXD6) and organophilic Montmorillonite (MMT). Partially orientated fibres (POF) of MXD6 nanocomposite were obtained by melt spinning on a multifilament fibre extrusion system at three different speeds. The effect of the drawing velocity
on the mechanical properties of the filaments has been determined. Tensile measurements indicated that the introduction of the nanoparticies by melt intercalation improves the tenacity and toughness of the resulting polyamide fibres. The microstructure of the nanocomposites was examined by X-ray diffraction and Transmission Electron Microscope (TEM) and shown to
be an exfoliated disordered structure. The thermal stability of MXD6 nanocomposites was analysed by thermo gravimetric analysis (TGA) suggesting stabilisation of the clay and the polymer systems above 450°C.

Enhancement of natural ventilation in high-rise residential buildings using stack system

This paper describes the feasibility study on the application of passive and active stack systems to enhance natural ventilation in public housing in Singapore. About 86% of the population is staying in high-rise public housing, known as Housing and Development Board (HDB) flats, which is designed for natural ventilation. The primary objective of this work is to assess the status of natural ventilation in a typical four-room HDB flat using scaled model in the wind tunnel, and to develop an effective passive or active stack system to enhance natural ventilation in the flat. Four numbers of stacks with different sizes were tested at two locations in the flat. The study shows that the passive stack, incorporating the principle of airflow due to buoyancy, does not enhance air velocity in the flat. However, the active stack which operates based on the suction effect induced by a fan fixed at the top of the stack leads to substantial increase in the air velocity at the room and thus meeting the human’s thermal comfort condition. It was noted that the velocities increase along with the increase in the stack size.