Physical prototypes in cross-functional team collaboration : a study of the Model-T2 concept car project

Virtual and physical prototypes play a significant role in the design of artifacts. This is particularly true in cross-functional team collaboration, where diverse disciplines come together to contribute to the concept, design and development of an artifact. While the role of prototyping in design and cross-functional collaboration has been widely studied independently, little is known of the role that physical prototypes play during cross-functional team collaboration. This paper reports on a study of virtual and physical prototyping strategies used by a cross-functional team comprising engineers and designers working on a concept car project. The paper provides a background of the collaborative design process and details the role of physical prototyping methods during the design of the concept car.

Customer repurchase intention: a general structural equation model

This paper develops a general service sector model of repurchase intention from the consumer theory literature. A key contribution of the structural equation model is the incorporation of customer perceptions of equity and value and customer brand preference into an integrated repurchase intention analysis. The model describes the extent to which customer repurchase intention is influenced by seven important factors – service quality, equity and value, customer satisfaction, past loyalty, expected switching cost and brand preference. The general model is applied to customers of comprehensive car insurance and personal superannuation services. The analysis finds that although perceived quality does not directly affect customer satisfaction, it does so indirectly via customer equity and value perceptions. The study also finds that past purchase loyalty is not directly related to customer satisfaction or current brand preference and that brand preference is an intervening factor between customer satisfaction and repurchase intention. The main factor influencing brand preference was perceived value with customer satisfaction and expected switching cost having less influence.

Women`s satisfaction with life following marital separation : coping resources and adjustment of lone-parent women

This questionnaire study examined the adjustment of 245 lone-parenting women following marital separation. A composite model included intrapsychic variables as intervening between demographic and contextual variables and adjustment (life satisfaction). Regression analyses showed that the demographic and contextual variables were partially mediated by the intrapsychic variables. The path model indicated that the intrapsychic variables (sense of coherence, control, depression, and grief) had a direct impact on life satisfaction and that there was an indirect path for depression through sense of coherence (SOC) and control. It was concluded that the intrapsychic variables had a more powerful relationship with women's post-separation life satisfaction than did the demographic/contextual variables. Social implications and recommendations for future policy are considered.

An web content based data mining for car consumption in China

This paper introduces an incremental FP-Growth approach for Web content based data mining and its application in solving a real world problem The problem is solved in the following ways. Firstly, we obtain the semi-structured data from the Web pages of Chinese car market and structure them and save them in local database. Secondly, we use an incremental FP-Growth algorithm for mining association rules to discover Chinese consumers' car consumption preference. To find more general regularities, an attribute-oriented induction method is also utilized to find customer's consumption preference among a range of car categories. Experimental results have revealed some interesting consumption preferences that are useful for the decision makers to make the policy to encourage and guide car consumption. Although the current data we used may not be the best representative of the actual market in practice, it is still good enough for the decision making purpose in terms of reflecting the real situation of car consumption preference under the two assumptions in the context.

Comparison of tissue dosimetry in the mouse following chronic exposure to arsenic compounds

Several chronic bioassays have been conducted in multiple strains of mice in which various concentrations of arsenate or arsenite were administered in the drinking water without a tumorigenic effect. However, one study (Ng et al., 1999) reported a significant increase in tumor incidence in C57Bl/6J mice exposed to arsenic in their drinking water throughout their lifetime, with no tumors reported in controls. A physiologically based pharmacokinetic model for arsenic in the mouse has previously been developed (Gentry et al., 2004) to investigate potential differences in tissue dosimetry of arsenic species across various strains of mice. Initial results indicated no significant differences in blood, liver, or urine dosimetry in B6C3F1 and C57Bl/6 mice for acute or subchronic exposure. The current work was conducted to compare model-predicted estimates of tissue dosimetry to additional kinetic information from the (C57Bl/6 x CBA)F1 and TgAc mouse. The results from the current modeling indicate that the pharmacokinetic parameters derived based on information in the B6C3F1 mouse adequately describe the measured concentrations in the blood/plasma, liver, and urine of both the (C57Bl/6 x CBA)F1 and TgAc mouse, providing further support that the differences in response observed in the chronic bioassays are not related to strain-specific differences in pharmacokinetics. One significant finding was that no increases in skin or lung concentrations of arsenic species in the (C57Bl/6 x CBA)F1 strain were observed following administration of low concentrations (0.2 or 2 mg/L) of arsenate in the drinking water, even though differences in response in the skin were reported. These data suggest that pharmacodynamic changes may be observed following exposure to arsenic compounds without an observable change in tissue dosimetry. These results provided further indirect support for the existence of inducible arsenic efflux in these tissues.

Use of in vitro critical inhibitory concentration, a novel approach to predict in vivo synergistic bactericidal effect of combined amikacin and piperacillin against pseudomonas aeruginosa in a systemic rat infection model

PURPOSE: This study was undertaken to explore the use of in vitro critical inhibitory concentration (CIC) as a surrogate marker relating the pharmacokinetic (PK) parameters to in vivo bactericidal synergistic effect [pharmacodynamic (PD)] of amikacin + piperacillin combination against Pseudomonas aeruginosa in a systemic rat infection model. METHODS: The in vitro antibacterial activities of amikacin and piperacillin, alone and in combinations at various ratios of the concentrations, were tested against a standard [5 x 10(5) colony-forming units (CFU)/ml] and a large (1.5 x 10(8) CFU/ml) inoculum of P. aeruginosa ATCC 9027 using a modified survival-time method. The CIC of each individual antibiotic for the different combinations was determined using a cup-plate method. In vivo studies were performed on Sprague-Dawley rats using a systemic model of infection with P. aeruginosa ATCC 9027. PK profiles and in vivo killing effects of the combination at different dosing ratios were studied. RESULTS: An inoculum effect was observed with the antibiotics studied. Synergy was seen against both the inocula at the following concentration ratios: 70% C(ami) + 30% C(pip) and 75% C(ami) + 25% C(pip), where C(ami) and C(pip) are the concentrations of amikacin and piperacillin to produce a 1000-fold decrease in bacterial population over 5 h, respectively. The CIC values determined corroborated with the order of in vitro bacterial killing observed for the antibiotic combinations. The dosing ratio of 12.6 mg/kg amikacin + 36 mg/kg piperacillin (a 70:30 ratio of the individual doses) exhibited the greatest killing in vivo when compared to the other ratios. The PK-PD relationships were described by simple, linear regression equations using the area under the in vivo killing curve as a PD marker and the AUCIC(ami)/CIC(ami) + AUCIC(pip)/CIC(pip), AUC(ami)/CIC(ami) + AUC(pip)/CIC(pip), C(max,ami)/CIC(ami) + C(max,pip)/CIC(pip), and AUCIC(ami)/MIC(ami) + AUCIC(pip)/MIC(pip) as PK markers for the amikacin + piperacillin combination. CONCLUSION: The combination of amikacin and piperacillin exhibited synergistic killing effect on P. aeruginosa that could be modeled using CIC as a surrogate marker relating the PK parameters to in vivo bactericidal effect.

Predicting the grade of disability 1 year after stroke following rehabilitation

The purpose of this study was to identify predictors of grades of disability at least 1 year after stroke rehabilitation therapy. We recruited stroke patients from the inpatient rehabilitation department of a university hospital. The degree of disability was graded using the disability evaluation at least 1 year after stroke onset. Functional ability was evaluated using the Functional Independence Measure instrument on admission, on discharge from the inpatient rehabilitation program, and at the 6-month follow-up visit after discharge. Major sociodemographic, medical, and rehabilitative factors were also collected during the hospitalization period. Of the 109 patients surveyed, 64 (58.7%) had severe or very severe grades of disability. The correlates of severe or very severe disability in logistic regression analyses were bilaterally affected (odds ratio, OR, 10.8), impaired orientation (OR, 3.6), and poorer functional ability at discharge (OR, 7.6). Based on the significant predictors identified, the logistic regression model correctly classified severe or very severe disability in 68.0% of subjects. The higher frequency of severe or very severe disability in this study may have been due to the relatively more severely affected stroke patient population in the inpatient rehabilitation service and the use of unique disability evaluation criteria. These results may provide information useful in planning continuous rehabilitation care and setting relevant socio-welfare policies for stroke victims.

High strain mechanical loading rapidly induces tendon apoptosis : an ex vivo rat tibialis anterior model

Background: The role of apoptosis, or programmed cell death, has only recently been explored in tendon.

Objective: To investigate the development of apoptosis after high strain loading of rat tendon.

Methods: The right tibialis anterior tendons of three rats were prepared for mechanical loading, and left tendons were prepared identically as non-loaded controls. Tendon was loaded with 20% strain for six hours using a 1 Hz longitudinal sine wave signal. The following were used to assess apoptosis: (a) a monoclonal mouse antibody (F7-26) to label single stranded DNA breaks; (b) a rabbit polyclonal antibody that specifically recognises the cleaved form of caspase-3.

Results: Light microscopy confirmed that the high strain protocol induced a stretch overload injury. Control tendons showed little or no staining with the F7-26 antibody, but the loaded tendons displayed numerous apoptotic cells. The percentage of apoptotic cells (20%) in the loaded tendon was significantly greater than in the control tendon (1%) (p = 0.000). The labelled cells colocalised with abnormal nuclear morphology, including nuclear fragmentation. The staining against cleaved caspase-3 was positive in loaded tendons only, and localised both to nucleus and cytoplasm.

Conclusion: This experiment extends knowledge of human tendon apoptosis by showing that apoptosis can occur in response to short term, high strain mechanical loading. This is the first report of mechanical loading of intact tendon causing excessive apoptosis.

Bone formation following implantation of titanium sponge rods into humeral osteotomies in dogs : a histological and histometrical study

Background: Titanium (Ti) is widely proven to enhance bone contact and growth on its surface. It is expected that bone defects could benefit from Ti to promote healing and to increase strength of the implanted area.

Purpose: The present study aimed at comparing the potential of porous Ti sponge rods with synthetic hydroxyapatite (HA) for the healing of bone defects in a canine model.

Material and Methods: Six mongrel dogs were submitted to three trephined osteotomies of 6.0 × 4.0 mm in one humerus and after 2 months another three osteotomies were performed in the contralateral humerus. A total of 36 defects were randomly filled either with Ti foam, particulate HA, or coagulum (control). The six animals were killed 4 months after the first surgery for histological and histometrical analysis.

Results: The Ti-foam surface was frequently found in intimate contact with new bone especially at the defect walls. Control sites showed higher amounts of newly formed bone at 2 months – Ti (p = 0.000) and HA (p = 0.009) – and 4 months when compared with Ti (p = 0.001). Differently from HA, the Ti foam was densely distributed across the defect area which rendered less space for bone growth in the latter's sites. The use of Ti foams or HA resulted in similar amounts of bone formation in both time intervals. Nevertheless, the presence of a Ti-foam rod preserved defect's marginal bone height as compared with control groups. Also, the Ti-foam group showed a more mature bone pattern at 4 months than HA sites.

Conclusion: The Ti foam exhibited good biocompatibility, and its application resulted in improved maintenance of bone height compared with control sites. The Ti foam in a rod design exhibited bone ingrowth properties suitable for further exploration in other experimental situations.

Innovative model for clinical education in dietetics

Aim: Professional practice placement programs in dietetics face a number of challenges in respect of quantity, quality and sustainability. The aim of the present study is to report on the development of an innovative placement model based on a variety of training and supervision approaches to address these aforementioned challenges.

Methods: The model was developed following an investigation of existing practice and the literature with approaches that were identified as important to the requirements and constraints of dietetics clinical training incorporated into the model.

Results: Although one-on-one supervision is the predominant approach in Australian dietetic education, the educational literature and the authors' experience showed that a variety of approaches are represented in some form. The model developed involves the pairing of two students with one supervisor with students changing peer partners and supervisors every three weeks during the nine-week placement to diversify exposure to working and learning styles. The model integrates four customised approaches: incremental exposure to tasks; use of a clinical reasoning framework to help structure student understanding of the methods and judgements involved in patient care; structured enquiry in group discussions; and peer observation and feedback.

Conclusions: The model has potential to achieve efficiencies in supervisors' involvement by coordinating the skill development activities of students as a group and promoting peer-assisted learning.

UnitingCare West Outreach Services and the Good Lives Model of offender rehabiliation

UnitingCare West is a not-for-profit community services organisation committed to achieving justice, hope and opportunity for all, and works to support and empower in particular those most in need in the WA community. Through its program Outreach Services, it delivers a specialist re-entry service for sex offenders and men serving life and indeterminate sentences. The program has recently been reviewed by Dr Andrew Day from the Centre for Offender Reintegration, Deakin University with input from Dr Tony Ward, University of Victoria, Wellington, New Zealand. In this paper we describe the aims of the review, the process and findings and our ongoing work in developing a rationale for the service that is underpinned by the Good Lives Model (GLM) of offender rehabilitation. More generally, the presentation will seek to understand the needs of offenders who re-enter the community following long-term imprisonment in relation to those areas of need identified in the GLM.

Household water use behavior : an integrated model

Water authorities are dealing with the challenge of ensuring that there is enough water to meet demand in the face of drought, population growth and predictions of reduced supply due to climate change. In order to develop  effective household demand management programs, water managers need to understand the factors that influence household water use. Following an examination and re-analysis of current water consumption behavioral models we propose a new model for understanding household water consumption. We argue that trust plays a role in household water consumption, since people will not save water if they feel others are not minimizing their water use (inter-personal trust). Furthermore, people are less likely to save water if they do not trust the water authority (institutional trust). This paper proposes that to fully understand the factors involved in determining household water use the impact of trust on water consumption needs investigation.

Risk allocation in public-private partnership projects : an innovative model with an intelligent approach

Both the increasing private participation in public projects and the critical importance of appropriate risk allocation to the success of Public-private partnership (PPP) projects justify specific research on how to establish effective risk allocation strategies in PPP projects. Partner’s risk management capability is currently the main concern to risk allocation in PPP projects. Following the transaction cost economics, it is argued that factors such as partner’s commitment and risk management structure should be considered simultaneously in order to develop effective risk allocation strategies. Based on the holistic capability-commitment governance-driven view, this paper proposed a model for generating an optimal risk allocation strategy in PPP projects. The model is demonstrated and described. An artificial intelligent technique integrated with fuzzy logic for model testing and validation is then introduced and justified. The innovative model is expected to provide a logical and complete understanding of the risk allocation strategy selection process, and to provide stakeholders with a richer framework than previously existing ones to guide their decision-making on risk allocation strategies.

Production system model of children's development of number concepts

The purpose of the present research study was to produce a global, cumulative model of number concept development for children between the ages of two and eight years old. The theoretical and methodological orientation of this study was greatly influenced by Richard Young's production system analysis of seriation by young children (Young, 1971, 1976) and by Newell's (1973) seminal paper, ‘You can't play twenty questions with nature and win’. The methodology used in this investigation thus was as follows. A series of complex number tasks encompassing many aspects of the concept of number were developed. Five children aged between three and seven years then were videotaped while performing some of these complex number tasks. From a detailed protocol analysis of the video-recordings, computer simulation models written in the production system language PSS3 (Ohlsson, 1979) were produced. Specific production system models were produced for each of following aspects of the children's number knowledge: (i) sharing of discrete quantities; (ii) comparison of shares; and (iii) conservation/addition/subtraction of number. These domain-specific models were based on the converging experimental evidence obtained from each of the children’s responses to variants of the complex number tasks. Each child thus received a different set of problems which were chosen systematically in order to clarify particular features of the child's abilities. After a production system model for each child had been produced within a domain, these models were compared and contrasted. From this analysis, developmental trends within the domain were identified and discussed. The research and educational implications of these developmental trends then were discussed. In the concluding parts of this study, the children's domain-specific production system models were cumulated into global, comprehensive models which accurately represented their behaviour in a variety of number tasks. These comprehensive models were compared and contrasted and general developmental trends in young children's number knowledge were identified and discussed.