Community-based study on knowledge, attitude and practice on the mode of transmission, prevention and treatment of the Buruli ulcer in Ga West District, Ghana

Buruli ulcer disease (BUD), a devastating tropical disease caused by Mycobacterium ulcerans, occurs in more than 80% of the administrative districts of Ghana. To elucidate community perceptions and
understanding of the aetiology of BUD, attitudes towards Buruli patients and treatment-seeking behaviours, we conducted a survey with 504 heads of households and seven focus group discussions in Ga West District, Ghana. Although 67% of participants regarded BUD as a health problem, 53% did not know its cause. Sixteen per cent attributed the cause to drinking non-potable water, 8.1% mentioned poor personal hygiene or dirty surroundings, and 5.5% identified swimming or wading in ponds as a risk factor. About 5.2% thought that witchcraft and curses cause BUD, and 71.8% indicated that BU sufferers first seek treatment from herbalists and only refer to the hospital as a last resort. The main
reasons were prospects of prolonged hospital stay, cost of transport, loss of earnings and opportunity associated with parents attending their children’s hospitalization over extended period, delays in being
attended by medical staff, and not knowing the cause of the disease or required treatment. The level of acceptance of BUD sufferers was high in adults but less so in children. The challenge facing health workers is to break the vicious cycle of poor medical outcomes leading to poor attitudes to hospital treatment in the community. Because herbalists are often the first people consulted by those who contract the disease, they need to be trained in early recognition of the pre-ulcerative stage of Buruli lesions.

Crystal structures and textures in the hot-forged Ni-Mn-Ga shape memory alloys

Three ferromagnetic shape-memory alloys with the chemical compositions of Ni₅₃Mn₂₅Ga₂₂, Ni₄₈Mn₃₀Ga₂₂, and Ni₄₈Mn₂₅Ga₂₂Co₅ were prepared by the induction-melting and hot-forging process. The crystal structures were investigated by the neutron powder diffraction technique, showing that Ni₅₃Mn₂₅Ga₂₂ and Ni₄₈Mn₂₅Ga₂₂Co₅ have a tetragonal, 14/mmm martensitic structure at room temperature, while Ni₄₈Mn₃₀Ga₂₂ has a cubic, L2₁ austenitic structure at room temperature. The development of textures in the hot-forged samples shows the in-plane plastic flow anisotropy from the measured pole figures by means of the neutron diffraction technique. Significant texture changes were observed for the Ni₄₈Mn₂₅Ga₂₂Co₅ alloy after room temperature deformation, which is due to the deformation-induced rearrangements of martensitic variants. An excellent shape-memory effect (SME) with a recovery ratio of 74 pct was reported in this Ni₄₈Mn₂₅Ga₂₂Co₅ polycrystalline alloy after annealing above the martensitic transformation temperature, and the “shape-memory” influence also occurs in the distributions of grain orientations.

Crystallographic features during martensitic transformation in Ni-Mn-Ga ferromagnetic shape memory alloys

The martensitic transformation crystallography in two Ni ₅₃Mn₂₅Ga₂₂ (at. %) ferromagnetic shape memory alloys (FSMAs) was investigated by means of misorientation calculation and pole figure analysis based on the orientation of the martensitic lamellae obtained from electron backscattered diffraction (EBSD) measurements. In the alloy that was first annealed at 1073K for 4h, and then cooled to 473K at ~4K/min and held for 30min, followed by cooling to room temperature at ~10K/min, there are only two kinds of differently orientated martensitic lamellae with a misorientation angle of ~82° distributed alternatively in each initial austenite grain. There is a compound twinning orientation relationship between the two lamellae. The prevalent orientation relationship between austenite and martensite is Kurdjumov-Sachs (K-S) relationship with (111)_A//(10I)_M, [1-10]_a//[11-1]_m. In the alloy that was annealed at 1173K for 4h followed by furnace cooling, nanoscale twins inside the martensitic lamellae were observed and the orientation relationships both between the nanotwins within one lamella and between the nanotwins in two neighboring lamellae were determined. The results presented in this paper will enrich the crystallographic data of the FSMAs and offer useful information for the development of novel FSMAs with optimal performances.

A GA-PSO layered encoding evolutionary approach to 0/1 knapsack optimization

This paper presents a layered encoding cascade evolutionary approach to solve a 0/1 knapsack optimization problem. A layered encoding structure is proposed and developed based on the schema theorem and the concepts of cascade correlation and multi-population evolutionary algorithms. Genetic algorithm (GA) and particle swarm optimization (PSO) are combined with the proposed layered encoding structure to form a generic optimization model denoted as LGAPSO. In order to enhance the finding of both local and global optimum in the evolutionary search, the model adopts hill climbing evaluation criteria, feature of strength Pareto evolutionary approach (SPEA) as well as nondominated spread lengthen criteria. Four different sizes benchmark knapsack problems are studied using the proposed LGAPSO model. The performance of LGAPSO is compared to that of the ordinary multi-objective optimizers such as VEGA, NSGA, NPGA and SPEA. The proposed LGAPSO model is shown to be efficient in improving the search of knapsack’s optimum, capable of gaining better Pareto trade-off front.

Determination of crystal structure and crystallographic characteristics in Ni-Mn-Ga ferromagnetic shape memory alloys

Ni-Mn-Ga ferromagnetic shape memory alloys (FSMAs) have received great attention during the past decade due to their giant magnetic shape memory effect and fast dynamic response. The crystal structure and crystallographic features of two Ni-Mn-Ga alloys were precisely determined in this study. Neutron diffraction measurements show that Ni48Mn30Ga22 has a Heusler austenitic structure at room temperature; its crystal structure changes into a seven-layered martensitic structure when cooled to 243K. Ni53Mn25Ga22 has an I4/mmm martensitic structure at room temperature. Electron backscattered diffraction (EBSD) analyses reveal that there are only two martensitic variants with a misorientation of ~82° around <110> axis in each initial austenite grain in Ni53Mn25Ga22. The investigation on crystal structure and crystallographic features will shed light on the development of high-performance FSMAs with optimal properties.

Quantification of sensitization in AA5083-H131 via imaging Ga-embrittled fracture surfaces

Sensitization of 5xxx series Al alloys involving precipitation of β phase (Mg2Al3) at grain boundaries was studied for different exposure times at 100°C upon AA5083-H131 (UNS A95083). In this work, we reveal that fracture surfaces prepared by liquid gallium embrittlement can yield a quantification of grain boundary β phase with significant statistics on β phase size and spacing. This information is a necessary first step toward development of quantitative damage models to describe inter-granular corrosion (IGC) and stress corrosion (IGSCC).