GIS and remote sensing-based spatial models for commercial fisheries assessment

By applying a novel set of multidisciplinary GIS, remote sensing and spatial modelling approaches, research presented in this thesis advances our knowledge of the distribution patterns, fishery and ecological status of an important commercial benthic macro-invertebrate, blacklip abalone, in south-east Australia.

Use of geographical information system and remote sensing techniques for planning culture-based fisheries in non-perennial reservoirs of Sri Lanka

 The presence of a wide areal extent of small-sized village reservoirs offers a considerable potential for the development of culture-based fisheries (CBFs) in Sri Lanka. To this end, this study uses geographical information systems (GISs) and remote sensing (RS) techniques to determine the morphometric and biological characteristics most useful for classifying non-perennial reservoirs for CBF development and for assessing the influence of catchment land-use patterns on potential CBF yields. The reservoir shorelines at full water supply level were mapped with a Global Positioning System to determine shoreline length and reservoir areal extent. The ratio of shoreline length to reservoir extent, which was reported to be a powerful predictor variable of CBF yields, could be reliably quantified using RS techniques. The areal extent of reservoirs, quantified with RS techniques (RS extent), was used to estimate the ratio of forest cover plus scrubland cover to RS extent and was found to be significantly related to the CBF yield (R2 = 0.400; P < 0.05). The results of this study indicated that morphometric characteristics and catchment land-use patterns, which might be viewed as indices of biological productivity, can be quantified using RS and GIS techniques. © 2014 Wiley Publishing Asia Pty Ltd.

Evaluating coverage changes in national parks using a hybrid change detection algorithm and remote sensing

Remote sensing is a useful tool for detecting change over time.We introduce a hybrid change-detection method for forest and protected-area vegetation and demonstrate its use with two satellite images of Golestan National Park in northern Iran (1998 and 2010). We report on the advantages and disadvantages of the hybrid method relative to the standard change-detection method. In the proposed hybrid algorithm, the change vector analysis technique was used to determine changes in vegetation. Following this, we used postclassification comparison to determine the nature of the changes observed and their accuracy and to evaluate the effects of different parameters on the performance of the proposed method. We determined 85% accuracy for the proposed hybrid change-detection method, thus demonstrating a method for discovering and assessing environmental threats to natural treasures. © 2014 Society of Photo-Optical Instrumentation Engineers.

Investigating the distribution of acacia longifolia ssp. sophorae in south-west Victoria using satellite remote sensing and GIS

Mapping and analysis of the distribution of environmental weeds is an important component of strategic weed management. Such information is particularly important in managing 'native invaders', where invasion characteristics must be clearly understood prior to any management action being taken. This paper reports on an investigation of the current distribution of the native invader Acacia longifolia ssp. sophorae (Labill.) Court (coast wattle) in south-west Victoria, using remote sensing and Geographic Information Systems (GIS). Coast wattle was successfully mapped from Landsat ETM imagery using a supervised classification procedure, with 82%, of coast wattle shown on the map accurately depicting coast wattle on the ground. An estimated 11,448 ha were classified as supporting coast wattle, representing 12% of native vegetation in the study area. A more detailed GIS analysis in the Lower Glenelg National Park revealed coast wattle has invaded a limited number of vegetation types, and is more prevalent close to roads and within management zones associated with disturbance. The current regional extent of the species means widespread control is unlikely; hence the immediate focus should be on preventing further spread into areas where it is currently absent. Landsat imagery also proved to be a successful tool for mapping large scale coast wattle distribution, and could be used in long-term monitoring of the species.

Role assessment of GIS analysis and its reliability while ranking urban sustainability using scenarios specific to regional climate, community and culture

Urban Sustainability expresses the level of conservation of a city while living a town or consuming its urban resources, but the measurement of urban sustainability depends on what are considered important indicators of conservation besides the permitted levels of consumption in accordance with adopted criteria. This criterion should have common factors that are shared for all the members tested or cities to be evaluated as in this particular case for Abu Dhabi, but also have specific factors that are related to the geographic place, community and culture, that is the measures of urban sustainability specific to a middle east climate, community and culture where GIS Vector and Raster analysis have a role or add a value in urban sustainability measurements or grading are considered herein. Scenarios were tested using various GIS data types to replicate urban history (ten years period), current status and expected future of Abu Dhabi City setting factors to climate, community needs and culture. The useful Vector or Raster GIS data sets that are related to every scenario where selected and analysed in the sense of how and how much it can benefit the urban sustainability ranking in quantity and quality tests, this besides assessing the suitable data nature, type and format, the important topology rules to be considered, the useful attributes to be added, the relationships which should be maintained between data types of a geo- database, and specify its usage in a specific scenario test, then setting weights to each and every data type representing some elements of a phenomenon related to urban suitability factor. The results of assessing the role of GIS analysis provided data collection specifications such as the measures of accuracy reliable to a certain type of GIS functional analysis used in an urban sustainability ranking scenario tests. This paper reflects the prior results of the research that is conducted to test the multidiscipline evaluation of urban sustainability using different indicator metrics, that implement vector GIS Analysis and Raster GIS analysis as basic tools to assist the evaluation and increase of its reliability besides assessing and decomposing it, after which a hypothetical implementation of the chosen evaluation model represented by various scenarios was implemented on the planned urban sustainability factors for a certain period of time to appraise the expected future grade of urban sustainability and come out with advises associated with scenarios for assuring gap filling and relative high urban future sustainability. The results this paper is reflecting are concentrating on the elements of vector and raster GIS analysis that assists the proper urban sustainability grading within the chosen model, the reliability of spatial data collected; analysis selected and resulted spatial information. Starting from selecting some important indicators to comprise the model which include regional culture, climate and community needs an example of what was used is Energy Demand & Consumption (Cooling systems). Thus, this factor is related to the climate and it‟s regional specific as the temperature varies around 30-45 degrees centigrade in city areas, GIS 3D Polygons of building data used to analyse the volume of buildings, attributes „building heights‟, estimate the number of floors from the equation, following energy demand was calculated and consumption for the unit volume, and compared it in scenario with possible sustainable energy supply or using different environmental friendly cooling systems this is followed by calculating the cooling system effects on an area unit selected to be 1 sq. km, combined with the level of greenery area, and open space, as represented by parks polygons, trees polygons, empty areas, pedestrian polygons and road surface area polygons. (initial measures showed that cooling system consumption can be reduced by around 15 -20 % with a well-planned building distributions, proper spaces and with using environmental friendly products and building material, temperature levels were also combined in the scenario extracted from satellite images as interpreted from thermal bands 3 times during the period of assessment. Other examples of the assessment of GIS analysis to urban sustainability took place included Waste Productivity, some effects of greenhouse gases measured by the intensity of road polygons and closeness to dwelling areas, industry areas as defined from land use land cover thematic maps produced from classified satellite images then vectors were created to take part in defining their role within the scenarios. City Noise and light intensity assessment was also investigated, as the region experiences rapid development and noise is magnified due to construction activities, closeness of the airports, and highways. The assessment investigated the measures taken by urban planners to reduce degradation or properly manage it. Finally as a conclusion tables were presented to reflect the scenario results in combination with GIS data types, analysis types, and the level of GIS data reliability to measure the sustainability level of a city related to cultural and regional demands.

Hydro-acoustic remote sensing of benthic biological communities on the shallow South East Australian continental shelf

Information regarding the composition and extent of benthic habitats on the South East Australian continental shelf is limited. In this habitat mapping study, multibeam echosounder (MBES) data are integrated with precisely geo-referenced video ground-truth data to quantify benthic biotic communities at Cape Nelson, Victoria, Australia. Using an automated decision tree classification approach, 5 representative biotic groups defined from video analysis were related to hydro-acoustically derived variables in the Cape Nelson survey area. Using a combination of multibeam bathymetry, backscatter and derivative products produced highest overall accuracy (87%) and kappa statistic (0.83). This study demonstrates that decision tree classifiers are capable of integrating variable data types for mapping distributions of benthic biological assemblages, which are important in maintaining biodiversity and other system services in the marine environment.

Retrospective application of remote sensing to the Tasmanian lakeland

This thesis describes the research undertaken for a degree of Master of Science in a retrospective study of airborne remotely sensed data registered in 1990 and 1993, and field captured data of aquatic humus concentrations for ~ 45 lakes in Tasmania. The aim was to investigate and describe the relationship between the remotely sensed data and the field data and to test the hypothesis that the remotely sensed data would establish further evidence of a limnological corridor of change running north-west to south- east. The airborne remotely sensed data consisted of data captured by the CSIRO Ocean Colour Scanner (OCS) and a newly developed Canadian scanner, a compact airborne spectrographic imager (CASI). The thesis investigates the relationship between the two kinds of data sources. The remotely sensed data was collected with the OCS scanner in 1990 (during one day) and with both the OCS and the CASI in 1993 (during three days). The OCS scanner registers data in 9 wavelength bands between 380 nm and 960 nm with a 10-20 nm bandwidth, and the CASI in 288 wavelength bands between 379.57 nm and 893.5 nm (ie. spectral mode) with a spectral resolution of 2.5 nm. The remotely sensed data were extracted from the original tapes with the help of the CSIRO and supplied software and digital sample areas (band value means) for each lake were subsequently extracted for data manipulation and statistical analysis. Field data was captured concurrently with the remotely sensed data in 1993 by lake hopping using a light aircraft with floats. The field data used for analysis with the remotely sensed data were the laboratory determined g440 values from the 1993 water samples collated with g440 values determined from earlier years. No spectro-radiometric data of the lakes, data of incoming irradiance or ancillary climatic data were captured during the remote sensing missions. The sections of the background chapter in the thesis provide a background to the research both in regards to remote sensing of water quality and the relationship between remotely sensed spectral data and water quality parameters, as well as a description of the Tasmanian lakes flown. The lakes were divided into four groups based on results from previous studies and optical parameters, especially aquatic humus concentrations as measured from field captured data. The four groups consist of the ‘green” clear water lakes mostly situated on the Central Plateau, the ‘brown” highly dystrophic lakes in western Tasmania, the ‘corridor” lakes situated along a corridor of change lying approximately between the two lines denoting the Jurassic edge and 1200 mm isohyet, and the ‘eastern, turbid” lakes make up the fourth group. The analytical part of the research work was mostly concerned with manipulating and analysing the CASI data because of its higher spectral resolution. The research explores methods to apply corrections to this data to reduce the disturbing effects of varying illumination and atmospheric conditions. Three different methods were attempted. In the first method two different standardisation formulas are applied to the data as well as ‘day correction” factors calculated from data from one of the lakes, Lake Rolleston, which had data captured for all three days of the remote sensing operations. The standardisation formulas were also applied to the OCS data. In second method an attempt to reduce the effects of the atmosphere was performed using spectro-radiometric captured in 1988 for one of the lakes flown, Great Lake. All the lake sample data were time normalised using general irradiance data obtained from the University of Tasmania and the sky portion as calculated from Great Lake upwelling irradiance data was then subtracted. The last method involved using two different band ratios to eliminate atmospheric effects. Statistical analysis was applied to the data resulting from the three methods to try to describe the relationship between the remotely sensed data and the field captured data. Discriminant analysis, cluster analysis and factor analysis using principal component analysis (pea) were applied to the remotely sensed data and the field data. The factor scores resulting from the pca were regressed against the field collated data of g440 as were the values resulting from last method. The results from the statistical analysis of the data from the first method show that the lakes group well (100%) against the predetermined groups using discriminant analysis applied to the remotely sensed CASI data. Most variance in the data are contained in the first factor resulting from pca regardless of data manipulation method. Regression of the factor scores against g440 field data show a strong non- linear relationship and a one-sided linear regression test is therefore considered an inappropriate analysis method to describe the dataset relationships. The research has shown that with the available data, correction and analysis methods, and within the scope of the Masters study, it was not possible to establish the relationships between the remotely sensed data and the field measured parameters as hoped. The main reason for this was the failure to retrieve remotely sensed lake signatures adequately corrected for atmospheric noise for comparison with the field data. This in turn is a result of the lack of detailed ancillary information needed to apply available established methods for noise reduction - to apply these methods we require field spectroradiometric measurements and environmental information of the varying conditions both within the study area and within the time frame of capture of the remotely sensed data.

Detecting patterns of change in benthic habitats by acoustic remote sensing

Changes in benthic habitats occur as a result of natural variation or human-induced processes. It is important to understand natural fine-scale inter-annual patterns of change to separate these signals from patterns of long-term change. Describing change from an acoustic remote sensing standpoint has been facilitated by the recent availability of full coverage swath acoustic datasets, but is limited by cost pressures associated with multiple surveys of the same area. We studied the use of landscape transition analysis as a means to differentiate seemingly random patterns of habitat change from systematic signals of habitat transition at a shallow (10 to 50 m depth) 18 km2 site on the temperate Australian continental shelf in 2006 and 2007. Supervised classifications for each year were accomplished using inde pendently collected highresolution swath acoustic and video reference data. Of the 4 representative biotic clas ses considered, signals of directional systematic changes occurred be tween a kelp-dominated class, a sessile invertebrate-dominated class and a mixed class of kelp and sessile invertebrates. We provide a detailed analysis of the components of the traditional change detection cross tabulation matrix, allowing identification of the strongest signals of systematic habitat transitions. Iden tifying patterns of habitat change is an important first step toward understanding the processes that drive them.

Monitoring protected areas using remote sensing technology

Due to irrational use of natural resources, human society is facing unprecedented threats. Remote sensing is one of the essential tools to determine changes in various forms of biological diversity over time. There are many methods to determine changes in protected areas, using satellite images. In this paper after introducing different change detection methods and their advantages and disadvantages, a hybrid method is used to analyse changes in forests and protected areas in a national park. Two Landsat images of Golestan National Park in Iran (taken in 1998 and 2010) were used. This hybrid approach combines Change Vector Analysis (CVA) for flagging the occurrence of changes, followed by signature extension to assign labels to changedpixels. The main objective of this paper is to propose a method for discovering and assessing environmental threats to natural treasures.

Multivariate modelling of landuse on in-stream salinity over multiple spatial scales

An impediment to sustainable dryland salinity management is the lack of information on contributing factors. GIS and satellite imagery now offer a cost-effective means of generating relevant land and water resource information for integrated regional management of salinity. In this paper the relationships between patterns in land uselcover distribution and base flow salt concentration in streams (indicated by EC) are investigated and modelled. The Glenelg-Hopkins area is a large regional watershed in southwest Victoria, Australia, covering approximately 2.6 million ha. It is currently estimated that 27,400 ha of land is affected by dryland salinity and this is predicted to rapidly increase in the next decade' if current conditions prevail. Salt concentration data from five gauging stations were analysed with multi-temporal land use maps obtained from satellite imagery. Multiple regression analyses demonstrated that the variables Native Vegetation and Dry/and Grain Cropping were the most significant influences on in~stream salinity in the whole catchment (1=88.9%) and 500 m V=88.3%) and 100 m riparian buffers (1=86.9%) during times of base flow. The implications for future land use planning, effectiveness of riparian zones and revegetation programmes is discussed. This work also demonstrates the utility of applying nmltivariate statistical analyses, spatial statistics, and remote sensing with data integrated in a GIS framework for the purpose of predicting and managing the regional salinity threat.

A virtual clinic : telemetric assessment and monitoring for rural and remote areas

This article reports the establishment of a pilot ‘virtual clinic’ in a rural region of Victoria, Australia. Using low-cost videophones that work across ordinary phone lines, together with off-the-shelf (mostly automatic) clinical tools, local volunteers have been trained to mediate a virtual consultation between simulated patients and local GPs. This system has the potential to save long trips into town by such patients since the traditional ‘home visit’ is not feasible, as well as to provide regular home monitoring for those with chronic conditions. This in turn should impact favourably on ambulance deployment, sometimes enabling patients to avoid going to hospital or allowing them to come home sooner than otherwise would be the case, and generally to offer a sense of medical security to those living in isolated regions.

Undergraduate pre-registration nursing education in Australia: a longitudinal examination of enrolment and completion numbers with a focus on students from rural and remote campus locations

Introduction: There is much evidence to indicate a shortage of Registered Nurses (RNs) in Australia and to suggest that the shortage may be more pronounced in rural and remote locations. Attracting RNs to work in rural and remote areas may not be as simple as increasing the intake of students into university undergraduate pre-registration nursing courses. There is some evidence indicating that student nurses may be more likely to enter the nursing workforce in rural and remote locations if they have existing associations with rural and remote areas and/or their undergraduate education provides opportunities to undertake supported placements in rural and remote settings. Two important difficulties have been associated with measuring outcomes in relation to rural and remote pre-registration nursing students. One is defining what constitutes a rural or remote location and the other is suspect data on the number of nursing students enrolled in, and completing, nursing courses. The aims of this study were to provide a longitudinal profile of the number of domestic students studying and completing undergraduate pre-registration nursing courses in Australia, with a particular emphasis on identifying those at rural and remote university campuses, and to compare results across States and Territories.
Method: This study presents the combined findings from two investigative reports. Data on undergraduate pre-registration nursing student numbers were collected via electronic survey instruments completed by staff at all Australian educational institutions offering undergraduate pre-registration nursing education programs in 2001 and 2002. Australian domestic students were the focus of this study. Data included the total number of domestic students enrolled in undergraduate pre-registration nursing courses in 2001 and 2002, the number of domestic students who successfully completed courses in 1999, 2000 and 2001, and estimates for the number expected to complete in 2002. Surveys were sent to course coordinators or other staff nominated by heads of divisions of nursing at each institution.
Results: There was a 100% response rate. Twenty-four rural and remote campus locations were identified using an adjusted form of the Rural, Remote and Metropolitan Areas (RRMA) classification system. The Australian Capital Territory and the Northern Territory did not have any rural or remote campus locations. In contrast, undergraduate pre-registration nursing in Tasmania was offered at a rural campus only (for the first 2 years). From 2001 to 2002, there was an increase of just over 5% in the total number of domestic students enrolled in undergraduate pre-registration nursing courses in Australia (2002 total = 22 811 students). Rural and remote location students accounted for slightly more than 25% of these students in 2001, and almost 27% in 2002. The States Victoria, New South Wales and Queensland had the highest percentage of students enrolled at rural and remote campus locations, greater than the Australian average for both years. In contrast, South Australia and Western Australia had less than 11% of students enrolled at rural and remote campus locations for each year. Total undergraduate pre-registration course completions increased by approximately 16% across Australia between 1999 (n = 4868) and 2002 (n = 5667), although for 2002, the figure was projected. Of these total course completions, the percentage of students completing at rural and remote campus locations increased from almost 23% to nearly 28% during the same period. Of the States/Territories with both metropolitan and rural/remote campus locations, only Victoria and Queensland had more than 25% of their total student completions consisting of students enrolled at rural and remote campus locations for each year. In contrast, South Australia and Western Australia had approximately 6% of student completions consisting of students enrolled at rural and remote campus locations in 1999, increasing to approximately 12% projected for 2002.
Conclusion: In this study, the authors attempted to improve the accuracy of data collection in relation to the number of domestic undergraduate pre-registration nursing students in Australia, which is representative of the potentially new Australian domestic RN workforce. There was a trend towards an increasing number of students being enrolled in undergraduate pre-registration nursing courses, and also toward an increasing number of course completions. From the perspective of the rural and remote RN workforce, the percentage of students enrolled and completing courses at rural and remote campus locations was found to be increasing. However, there may be some areas of concern for education and workforce planners in States and Territories that are providing a smaller percentage of their undergraduate pre-registration nursing courses in rural and remote areas. Several study limitations are discussed and suggestions made for future research.

New money for mental health : will it make things better for rural and remote Australia?

New Australian government funding for the Better Outcomes in Mental Health Care initiative is a significant step forward for mental health, with general practitioners now able to offer direct referrals to psychologists, social workers, occupational therapists and Aboriginal health workers. Incentives for better teamwork between GPs and other mental health professionals have been introduced, but may have unintended consequences, including an exacerbation of workforce shortages in rural and remote areas. Possible solutions to these shortages include rural scholarships for students in the mental health professions; recruitment and retention of students coordinated by university departments of rural health; better access to continuing professional development; and federally funded rural positions and additional financial incentives for rural mental health practitioners.