Use of geographical information system and remote sensing techniques for planning culture-based fisheries in non-perennial reservoirs of Sri Lanka

 The presence of a wide areal extent of small-sized village reservoirs offers a considerable potential for the development of culture-based fisheries (CBFs) in Sri Lanka. To this end, this study uses geographical information systems (GISs) and remote sensing (RS) techniques to determine the morphometric and biological characteristics most useful for classifying non-perennial reservoirs for CBF development and for assessing the influence of catchment land-use patterns on potential CBF yields. The reservoir shorelines at full water supply level were mapped with a Global Positioning System to determine shoreline length and reservoir areal extent. The ratio of shoreline length to reservoir extent, which was reported to be a powerful predictor variable of CBF yields, could be reliably quantified using RS techniques. The areal extent of reservoirs, quantified with RS techniques (RS extent), was used to estimate the ratio of forest cover plus scrubland cover to RS extent and was found to be significantly related to the CBF yield (R2 = 0.400; P < 0.05). The results of this study indicated that morphometric characteristics and catchment land-use patterns, which might be viewed as indices of biological productivity, can be quantified using RS and GIS techniques. © 2014 Wiley Publishing Asia Pty Ltd.

An assessment tool for sub-catchment to catchment scale indicators of sustainability - a case study in south west Victoria, Australia

The research reported in this paper represents an attempt to produce a practical, indicator-based sustainability assessment tool incorporating all these elements is based on relationships between indicators determined considering spatial influences. Through the use of an existing sustainability indicator set and data currently available, relationships will be determined using Arcview Geographic Information Systems (GIS), correlation analysis and Principal Component Analysis (PCA). Indicator interactions will be identified at two spatial scales and compared to determine impacts of changing spatial scale. Further PCA and multiple regression analyses will then be used to reduce the complexity of the indicator set. These findings will be incorporated into a practical indicator-based assessment tool through the adoption of the Analytic Hierarchy Process (AHP) combined with GIS techniques that will then be validated. Once validated the tool can be used to aid in guiding planning and decision-making regarding sustainable development in the Glenelg Hopkins catchment, Victoria; while also moving towards producing a standard set of procedures for assessing sustainability.

Multi-temporal land use mapping using remotely sensed techniques and the integration of a pollutant load model in a GIS

Estimation of nutrient load production based on multi-temporal remotely sensed land-use data for the Glenelg-Hopkins region in southwest Victoria, Australia, is discussed. Changes in land use were mapped using archived Landsat data and computerized classification techniques. Land-use
change is unparalleled in recent history, with 13% of the region transformed in the last decade. Total nitrogen and phosphorus loading were estimated using an export coefficient model. The analysis demonstrated a disturbing increase in nitrogen and phosphorus loadings from 1995 to 2002. Whilst such increases were suspected from past anecdotal and ad-hoc evidence, our modelling quantitatively estimated such increases and thus demonstrated the enormous potential of using remote sensing and GIS for monitoring land-use change and hence improve land-use management.

Spatial prediction of rufous bristlebird habitat in a coastal heathland: a GIS-based approach

1. To develop a conservation management plan for a species, knowledge of its distribution and spatial arrangement of preferred habitat is essential. This is a difficult task, especially when the species of concern is in low   abundance. In south-western Victoria, Australia, populations of the rare rufous bristlebird Dasyornis broadbenti are threatened by fragmentation of suitable habitat. In order to improve the conservation status of this species, critical habitat requirements must be identified and a system of corridors must be established to link known populations. A predictive spatial model of rufous bristlebird habitat was developed in order to identify critical areas requiring preservation, such as corridors for dispersal.
2. Habitat models generated using generalized linear modelling techniques can assist in delineating the specific habitat requirements of a species. Coupled with geographic information system (GIS) technology, these models can be extrapolated to produce maps displaying the spatial configuration of suitable habitat.
3. Models were generated using logistic regression, with bristlebird presence or absence as the dependent variable and landscape variables, extracted from both GIS data layers and multispectral digital imagery, as the predictors. A multimodel inference approach based on Akaike’s information criterion was used and the resulting model was applied in a GIS to extrapolate predicted likelihood of occurrence across the entire area of concern. The predictive performance of the selected model was evaluated using the receiver operating characteristic (ROC) technique. A hierarchical partitioning protocol was used to identify the predictor variables most likely to influence variation in the dependent variable. Probability of species presence was used as an index of habitat suitability.
4. Negative associations between rufous bristlebird presence and  increasing elevation, 'distance to cree', 'distance to coast' and sun index were evident, suggesting a preference for areas relatively low in altitude, in close proximity to the coastal fringe and drainage lines, and receiving less direct sunlight. A positive association with increasing habitat complexity also suggested that this species prefers areas containing high vertical density of vegetation.
5. The predictive performance of the selected model was shown to be high (area under the curve 0·97), indicating a good fit of the model to the data. Hierarchical partitioning analysis showed that all the variables considered had significant  independent contributions towards explaining the variation in the dependent variable. The proportion of the total study area that was predicted as suitable habitat for the rufous bristlebird (using probability of occurrence at a ≥0·5 level ) was 16%.
6. Synthesis and applications. The spatial model clearly delineated areas predicted as highly suitable rufous bristlebird habitat, with evidence of potential corridors linking coastal and inland populations via gullies. Conservation of this species will depend on management actions that protect the critical habitats identified in the model. A multi-scale  approach to the modelling process is recommended whereby a spatially explicit model is first generated using landscape variables extracted from a GIS, and a second model at site level is developed using fine-scale habitat variables measured on the ground. Where there are constraints on the time and cost involved in measuring finer scale variables, the first step alone can be used for conservation planning.

Estimates of Heterozostera tasmanica, Zostera muelleri and Ruppia megacarpa distribution and biomass in the Hopkins Estuary, western Victoria, by GIS

Knowledge of the spatial arrangement of the seagrass distribution and biomass within the Hopkins Estuary is an essential step towards gaining an understanding of the functioning of the estuarine ecosystem. This study marks the first attempt to map seagrass distribution and model seagrass biomass and epiphyte biomass along depth gradients by the use of global positioning system (GPS) and geographical information system (GIS) technologies in the estuary. For mapping seagrass in small estuaries, ground-surveying the entire system is feasible. Three species of seagrasses, Heterozostera tasmanica (Martens ex Aschers), Zostera muelleri (Irmisch ex Aschers) and Ruppia megacarpa (Mason), were identified in the Hopkins Estuary. All beds investigated contained a mixed species relationship. Three harvest techniques were trialed in a pilot study, with the 25 × 25-cm quadrat statistically most appropriate. Biomass of seagrasses and epiphytes was found to vary significantly with depth, but not between sites. The average estimate of biomass for total seagrasses and their epiphytes in the estuary in January 2000 was 222.7 g m^–2 (dry weight). Of the total biomass, 50.6% or 112.7 g m^–2 (dry weight) was contributed by seagrasses and 49.4% of the biomass (110.0 g m^–2) were epiphytes. Of the 50.6% of the total biomass represented by seagrasses, 39.3% (87.5 g m^–2) were leaves and 11.3% (25.2 g m^–2) were rhizomes. The total area of seagrasses present in the Hopkins Estuary was estimated to be 0.4 ± 0.005 km², with the total area of the estuary estimated to be 1.6 ± 0.02 km² (25% cover). The total standing crop of seagrasses and epiphytes in the Hopkins Estuary in January 2000 was estimated to be 102.3 ± 57 t in dry weight, 56% (56.9 ± 17 t, dry weight) seagrasses and 44% (45.4 ± 19 t, dry weight) epiphytes. Of the seagrass biomass, 39% (39.7 ± 13 t, dry weight) was contributed by leaves and 17% (17.3 ± 7 t, dry weight) by rhizomes.

Using community-based monitoring with GIS to create habitat maps for a marine protected area in Australia

In recent years there has been an increase in community-based monitoring programmes developed and implemented worldwide. This paper describes how the data collected from such a programme could be integrated into a Geographic Information System (GIS) to create temperate subtidal marine habitat maps. A differential Global Positioning System was utilized to accurately record the location of the trained community-based SCUBA diver data. These georeferenced data sets were then used to classify benthic habitats using an aerial photograph and digitizing techniques. This study demonstrated that trained community-based volunteers can collect data that can be utilized within a GIS to create reliable and cost-effective maps of shallow temperate subtidal rocky reef systems.

Virtual melawati : 3D GIS as a decision support tool for urban planning

Virtual Melawati is an environment for developing expertise in the application of 3D interactive visualization and GIS (Geographic Information System) to address problems of the built environment and to test the model as a decision support tool in the context of the local planning authorities in Malaysia. The visual approach enables the integration of highly complex spatial GIS information such as the evolution and transformation of the urban precinct as well as the impact of planned developments into the decision making process. The study will examine the techniques of data acquisition, data reconstruction from physical to digital, urban analysis and visualization in constructing an interactive 3D GIS model to support and assist the decision making process in urban design and planning. The outcomes of the study will deliver an experimental test bed for improving decision making processes in urban planning and design utilizing 3D modeling and GIS. The project will accelerate the uptake of digital and multimedia methods in local government, facilitate current planning and consultation processes between councils and stakeholders and improve the dissemination and management of spatial information about urban environments.