Determination of sodium oxalate in Bayer liquor using flow-analysis incorporating an anion exchange column and tris(2,2`-bipyridyl)ruthenium(II) chemiluminescence detection

Semi-automated flow injection instrumentation, incorporating a small anion exchange column coupled with tris(2,2′-bipyridyl)ruthenium(II) (Ru(bipy)₃²⁺) chemiluminescence detection, was configured and utilised to develop rapid methodology for the determination of sodium oxalate in Bayer liquors. The elimination of both negative and positive interferences from aluminium(III) and, as yet, unknown concomitant organic species, respectively are discussed. The robustness of the methodology was considerably enhanced by using the temporally stable form of the chemiluminescence reagent, tris(2,2′-bipyridyl)ruthenium(III) perchlorate in dry acetonitrile. Real Bayer process samples were analysed and the results obtained compared well with those performed using standard methods within industrial laboratories.

Determination of glyphosate mono-isopropylamine salt in process samples using flow injection analysis with tris(2,2`-bipyridyl)ruthenium(II) chemiluminescence detection

The mono-isopropylamine salt of glyphosate was selectively determined directly in industrial and commercial formulations using flow injection analysis with tris(2,2′-bipyridyl)ruthenium(II) chemiluminescence detection without the need for separation. Glyphosate and its mono-isopropylamine salt furnished detection limits of 7×10⁻⁹ and 3.5×10⁻¹⁰ M and relative standard deviations of 0.4% at 1×10⁻⁷ M and 0.8% at 5×10⁻⁸ M, respectively. The methodology is robust and reliable with samples subjected only to aqueous dilution prior to analysis.

The determination of morphine in the larvae of calliphora stygia using flow injection analysis and HPLC with chemiluminescence detection

Selective determination of morphine in the larvae of Calliphora stygia (Fabricius) (Diptera: Calliphoridae) using acidic potassium permanganate chemiluminescence detection coupled with flow injection analysis and high-performance liquid chromatography (HPLC) is described. Larvae of C. stygia were reared on minced meat substrates that had been spiked with varying concentrations of morphine. Morphine concentrations were chosen to reflect typical levels in human tissues from opiate overdose victims. After maturing on substrates, larvae were analyzed for the presence of morphine using chemiluminescence detection coupled to flow injection analysis and a rapid HPLC method. Analysis of the larval matrix by flow injection analysis with chemiluminescence detection indicated the presence of interferants capable of generating chemiluminescence. A rapid chromatographic separation with a monolithic column allowed selective determination of morphine in larvae using postcolumn chemiluminescence detection. Larvae of C. stygia reared on substrates containing morphine at concentrations of 500 and 1000 ng/g did not sequester morphine at detectable concentrations. Larvae reared on substrates containing morphine concentrations of 2500, 5000, and 10,000 ng/g tested positive for the drug at concentrations of 765, 2720, and 3010 ng/g, respectively.

Improvements to separation and detection for forensic analysis of illicit substances

This article gives an overview of our recent research into separation and detection of analytes of forensic interest. This work has been carried out in collaboration with local forensic service providers and is based on our previous studies of chemiluminescence detection, flow analysis and capillary electrophoresis as applied to process analytical chemistry for the pharmaceutical industry. Chemiluminescence has the potential to provide low limits of detection in combination with high selectivity, while capillary electrophoresis allows for rapid, highly efficient separations. Examples of recent forensic applications are presented and future directions are discussed.

Dielectrophoretic manipulation and separation of microparticles using curved microelectrodes

This paper presents the development and experimental analysis of a dielectrophoresis (DEP) system, which is used for the manipulation and separation of microparticles in liquid flow. The system is composed of arrays of microelectrodes integrated to a microchannel. Novel curved microelectrodes are symmetrically placed with respect to the centre of the microchannel with a minimum gap of 40 mm. Computational fluid dynamics method is utilised to characterise the DEP field and predict the dynamics of particles. The performance of the system is assessed with microspheres of 1, 5 and 12 mm diameters. When a high-frequency potential is applied to microelectrodes a spatially varying electric field is induced in the microchannel, which creates the DEP force. Negative-DEP behaviour is observed with particles being repelled from the microelectrodes. The particles of different dimensions experience different DEP forces and thus settle to separate equilibrium zones across the microchannel. Experiments demonstrate the capability of the system as a field flow fraction tool for sorting microparticles according to their dimensions and dielectric properties.

Biogeographic models of gene flow in two waterfowl of the Australo-Papuan tropics

There are many large, easy-to-observe anseriform birds (ducks, geese, and swans) in northern Australia and New Guinea and they often gather in large numbers. Yet, the structure of their populations and their regional movements are poorly understood. Lack of understanding of population structure limits our capacity to understand source-sink dynamics relevant to their conservation or assess risks associated with avian-borne pathogens, in particular, avian influenza for which waterfowl are the main reservoir species. We set out to assess present-day genetic connectivity between populations of two widely distributed waterfowl in the Australo-Papuan tropics, magpie goose Anseranas semipalmata (Latham, 1798) and wandering whistling-duck Dendrocygna arcuata (Horsfield, 1824). Microsatellite data were obtained from 237 magpie geese and 64 wandering whistling-duck. Samples were collected across northern Australia, and at one site each in New Guinea and Timor Leste. In the wandering whistling-duck, genetic diversity was significantly apportioned by region and sampling location. For this species, the best model of population structure was New Guinea as the source population for all other populations. One remarkable result for this species was genetic separation of two flocks sampled contemporaneously on Cape York Peninsula only a few kilometers apart. In contrast, evidence for population structure was much weaker in the magpie goose, and Cape York as the source population provided the best fit to the observed structure. The fine scale genetic structure observed in wandering whistling-duck and magpie goose is consistent with earlier suggestions that the west-coast of Cape York Peninsula is a flyway for Australo-Papuan anseriforms between Australia and New Guinea across Torres Strait.

Hydrograph separation and development of empirical relationships using single-parameter digital filters

A reliable hydrograph separation method is necessary for surface runoff modeling and hydrological studies. This paper investigates and compares the separation characteristics of two single-parameter digital filters, which are herein referred to as the one-parameter algorithm and the conceptual method. The application of the one-parameter algorithm was found to be restricted to low and medium baseflow separations, with a maximum separation limit of 50% of the total runoff hydrograph. The one-parameter algorithm was also observed to produce unrealistic sharp peaks under the peaks of the measured hydrograph when recession constant is smaller than 0.96. On the other hand, the conceptual method is applicable even for catchments fed largely by groundwater discharge. However, a reliable estimation of recession constant is a prerequisite for applying the conceptual method for large baseflow separations. Based on the hydrograph separation results, useful empirical relationships were developed for a partially urbanized watershed to estimate total runoff and direct runoff from the measured rainfall depth. The relationships between rainfall depth and total runoff depth and rainfall depth and direct runoff depth were found to be well represented by linear equations. The empirical relationships were then applied to estimate the long-term contribution of baseflow and surface runoff to total runoff at the study site. Baseflow was found to contribute about 58–61% of the annual total runoff.

Population genetic structure, gene flow and sex-biased dispersal in frillneck lizards (Chlamydosaurus kingii)

By using both mitochondrial and nuclear multiloci markers, we explored population genetic structure, gene flow and sex-specific dispersal of frillneck lizards (Chlamydosaurus kingii) sampled at three locations, separated by 10 to 50 km, in a homogenous savannah woodland in tropical Australia. Apart from a recombinant lizard, the mitochondrial analyses revealed two nonoverlapping haplotypes/populations, while the nuclear markers showed that the frillneck lizards represented three separate clusters/populations. Due to the small population size of the mtDNA, fixation may occur via founder effects and/or drift. We therefore suggest that either of these two processes, or a combination of the two, are the most likely causes of the discordant results obtained from the mitochondrial and the nuclear markers. In contrast to the nonoverlapping mitochondrial haplotypes, in 12 out of 74 lizards, mixed nuclear genotypes were observed, hence revealing a limited nuclear gene flow. Although gene flow should ultimately result in a blending of the populations, we propose that the distinct nuclear population structure is maintained by frequent fires resulting in local bottlenecks, and concomitant spatial separation of the frillneck lizard populations. Limited mark-recapture data and the difference in distribution of the mitochondrial and nuclear markers suggest that the mixed nuclear genotypes were caused by juvenile male-biased dispersal.

A parametric study of a monolithic microfluidic system for on-chip biomolecular separation

A microfabricated poly(dimethylsiloxane) (PDMS) chip containing channel filled with polymer monolith has been developed for on-chip biomolecule separation. Methacrylate monolithic polymers were prepared by photo-initiated polymerization within the channel to serve as a continuous stationary phase. The monolithic polymer was functionalized with a weak anion-exchange ligand, and key parameters affecting the binding characteristics of the system were investigated. The total binding capacity was unaffected by the flow rate of the mobile phase but varied significantly with changes in ionic strength and pH of the binding buffer. The binding capacity decreased with increasing buffer ionic strength, and this is due to the limited available binding sites for protein adsorption resulting from cationic shielding effect. Similarly, the binding capacity decreased with decreasing buffer pH towards the isoelectric point of the protein. A protein mixture, BSA and ovalbumin, was used to illustrate the capacity of the methacrylate-based microfluidic chip for rapid biomolecule separation.

Application of extended multivariate modeling for information flow analysis of event related responses

Event related potential (ERP) analysis is one of the most widely used methods in cognitive neuroscience research to study the physiological correlates of sensory, perceptual and cognitive activity associated with processing information. To this end information flow or dynamic effective connectivity analysis is a vital technique to understand the higher cognitive processing under different events. In this paper we present a Granger causality (GC)-based connectivity estimation applied to ERP data analysis. In contrast to the generally used strictly causal multivariate autoregressive model, we use an extended multivariate autoregressive model (eMVAR) which also accounts for any instantaneous interaction among variables under consideration. The experimental data used in the paper is based on a single subject data set for erroneous button press response from a two-back with feedback continuous performance task (CPT). In order to demonstrate the feasibility of application of eMVAR models in source space connectivity studies, we use cortical source time series data estimated using blind source separation or independent component analysis (ICA) for this data set.