Developing a facility for glass façade performance testing

This research aims to investigate whether real spaces can support legitimate measurements on glazing energy and thermal comfort analysis. This paper presents the development of a research facility for doing this. It will test simple to complex glazing and shading systems in a real (occupied) interior office environment. The purpose of this research project is to compare measured results with those being simulated with existing software and to discover discrepancies between simulation and real measured results. What parameters characterize a glazing system, whether simple or complex? Can these parameters be used to predict the energy transfer and comfort in the space? One must begin with simple glazing systems and verify measured with readily known simulated results. It is, at present, very difficult to use geometric based software with thermal based software to predict the performance of complex glazing systems. However, if we can characterize glazing systems with a set of reliable measurements, we can provide the data necessary for predicting performance in a live space. Specifically, the Solar Heat Gain Coefficient (SHGC) is a variable parameter based upon solar incident angle to a glazing system and is intended to be measured in its integral components: solar transmittance and inward-flowing fraction (radiative/convective) heat gain. A new instrumental approach through variable surface coated heat flux meters is being investigated to provide the measurement of interior glazing surface radiative and convective heat gain. The results suggest that this instrumentation may support be a viable method of testing inward-flowing heat gains from the interior glass surface. The test set-up also considers the application of a well-known B&K 1221 Comfort Meter for determining thermal comfort responses in the ‘perimeter zone’ on the interior side of a façade. This work requires further investigation, but is intended to be used in conjunction with solar pyranometers measuring transmittance as well as the heat flux meter and surface temperature instrumentation.

The totalitarian dynamic behind HRM's democratic façade

The terms 'authoritarian' and 'democratic' are political concepts often applied as a means of distinguishing human resource management (HRM) from older forms of labour management, the common assertion being that former authoritarian practices have become more democratic under HRM. This article challenges this view by arguing that the foundational principles and practices of HRM, when orientated by the expectations of a 'desired' organisational culture, cast it into a role that involves mobilising the collective psychology of organisational members to accept willingly the legitimacy of managerial authority and the virtues of firm loyalty. It is suggested that such a role has no parallel in orthodox democratic arrangements; that if political concepts are to be applied to the way labour is managed under HRM, a clearer affinity exists with the aims and practices of totalitarian regimes and their use of propaganda and other means to control civilian populations. Key points: This article challenges the assumption that HRM is cast in the spirit of democracy. HRM's foundational principles and functional practices are instead more closely aligned with totalitarian conceptions of social control. This is evidenced by HRM's role in mobilising the collective psychology of employees in accordance with a 'desired' workplace culture proscribed by organisational leaderships.

Microclimatic modeling of the urban thermal environment of Singapore to mitigate urban heat island

This study investigates the urban heat island effect in Singapore and examines the key factors causing this effect. The possibilities of improving heat extraction rate by optimizing air flow in selected hot spots were explored. The effect of building geometry, façade materials and the location of air-conditioning condensers on the outdoor air temperature was explored using computational fluid dynamics (CFD) simulations. It was found that at very low wind speeds, the effect of façade materials and their colours was very significant and the temperature at the middle of a narrow canyon increased up to 2.5 °C with the façade material having lower albedo. It was also found that strategically placing a few high-rise towers will enhance the air flow inside the canyon thereby reducing the air temperature. Adopting an optimum H/W ratio for the canyons increased the velocity by up to 35% and reduced the corresponding temperature by up to 0.7 °C.

Lived experience of gay men caring for others with HIV/AIDS : living, loving and dying in the era of HIV/AIDS

This thesis explored gay male carers’ experience of caring for their partner, brother or friend who had HIV/AIDS. Through using phenomenological methodology (van Manen, 1990), the day-to-day caring experiences were uncovered. The data gathered were then analysed through a nursing ‘lens’, with the concept of stigma as an anchoring point. The dual stigmas of homophobia and AIDS phobia impacted on the daily lives of these men as they cared for their loved one. The research identified six themes. These were: 1) the relationship; 2) coping with HIV and AIDS; 3) the corporal impact of HIV/AIDS; 4) experiences of carers including the absence of others; 5) living daily with the virus: Demands of people living with HIV/AIDS (PLWHA); and 6) saying goodbye, but wanting to keep the memory alive. The caring these men undertook, for which they were frequently unprepared, was intensive and complex, but because of their commitment and love they battled on. Because of a sense of shame associated with AIDS phobia on the part of the PLWHA, the carer often had to undertake this care in isolation, without support from family, friends or home health care agencies. The carers struggled with not only the demands of day-to-day care, but also with non-acceptance from family, both of the nature of the relationship with their partner and of their homosexuality. Family members were forced, often with great difficulty, to acknowledge the close commitment the men had to each other. Recognition that one had a terminal disease, HIV/AIDS was also required. The fear of potential transmission was high among carers, friends and family members. Notably, there was an absence of blame on the part of the carer towards his partner for contracting HIV/AIDS. The physical decline and marking of the body further stigmatised the PLWHA, which added to carers’ burdens. They endeavoured to minimise the physical decline in their partner, so he could continue to pass as healthy, and attempted to make the day-to-day living as normal as possible. The methods of combating weight loss and opportunistic infections meant frequent medical appointments, complex intensive medical procedures and help with personal care, which was undertaken at home largely without support from health care staff. Carers frequently struggled also with their partner’s denial of being ill. One strategy all carers used was to escape with their partners from their everyday life in Melbourne and attempt metaphorically to leave the HIV/AIDS behind; this was a time when they could rekindle their life together as it was before HIV/AIDS came into their lives. Some carers chose to holiday without their partner, to give themselves a break from the day-to-day caring, while others planned and took holidays with their partner. The decline of the health in the PLWHA meant that family members had to recognise and accept both the nature of the relationship and the presence of the disease. This recognition and acceptance often came only when the partner was very ill, even at the point of dying. Carers and their partners discussed the potential use of euthanasia, as a means of ending the final phase of life with some dignity. One carer and his partner used euthanasia, despite its illegal status. The main concern for all carers was providing comfort and a reduction in the pain associated with HIV/AIDS for the partner. The widespread grief associated with HIV/AIDS was evident amongst these carers. All had known other gay men who had died, some carers own partner had died, or was about to die. There was an overwhelming sense of grief, which at times was repressed as a means of coping day-to-day. All carers felt it was important and necessary to remember those lost to HIV/AIDS through the various public memorials, as they did not want their partner to be just another faceless person lost to this disease. This phenomenological study of carers’ experience highlights the need for health care workers to be aware of the differing strategies that gay men use to cope with HIV/AIDS. While it may seem that the carers are coping with care of their partner, the outer façade is not always an accurate portrayal of the true situation. Health care workers should enquire as to the assistance these carers need from health care services in order to continue to care for their loved one. Such assistance can be the simple recognition of the partner and acceptance of them as part of the PLWHA’s network; this inclusion and acceptance is half the battle.

A review of occupant control on natural ventilation

According to IPCC (Intergovernmental Panel on Climate Change), the largest use of energy in commercial buildings is space heating in colder climates and air conditioning in hot climates. In Europe, the Directive on the energy performance of buildings EPBD (European Energy Performance of Buildings Directive) [1] provides a framework for national building performance regulations and calculation procedures. However, there are often large discrepancies between calculated and measured energy performance of buildings. One main reason is the behaviour of occupants, which is often not reflected in calculation models.

Responsive façades : parametric control of moveable tilings

The challenge of developing adaptive, responsive low-energy architecture requires new knowledge about the complex and dynamic interaction between envelope architecture, optimization between competing environmental performance metrics (light, heat and wind indices) and local climate variables. Advances in modeling the geometry of building envelopes and control technologies for adaptive buildings now permit the sophisticated evaluation of alternative envelope configurations for a set of performance criteria.