Correct weight? analysing Australian football through a derivative global or cultural cringe model

The application of a 'global' model, in practice usually British or American, and generalised sociological concepts to a particular sport and its social and cultural context is not always appropriate. In Australian academia, the custom is particularly appealing, due to the Australian colonial 'cultural cringe', the pattern of automatic deference to overseas (termed 'international') knowledge. This article argues that 'Fresh Prince of Coloma! Dome: Indigenous Logic in the AFL' (Football Studies, 8(1), 2005) inappropriately applies American sociological, and American football, logic to the indigenous Australian game Australian football, which differs in character both as a game and in its social, cultural and political context. The three researchers do not take account of the factors of height and weight in Australian football, and the average size of Aboriginal players, and of the relationship between speed and strength in the game as strategies and tactics change. Both omissions constitute fundamental flaws. American football and sports sociology's ideas of 'central position theory', with a suggestion of underlying racism, is of limited relevance to Australian football. It is also possible that the American sitcom, Fresh Prince of Bel Air, was neither a helpful muse nor a suitable metaphor for research into this subj ect. In Australian football, a game in which few 'central positions' are crucial and in which 'leadership positions' can be found in many parts of the ground, including the half-back flank and the wing, neither size nor position are the only major determinants of significance in the team.

Vascular attack by 5,6-dimethylxanthenone-4-acetic acid combined with B7.1 (CD80)-mediated immunotherapy overcomes immune resistance and leads to the eradication of large tumors and multiple tumor foci

The promise of cancer immunotherapy is that it will not only eradicate primary tumors but will generate systemic antitumor immunity capable of destroying distant metastases. A major problem that must first be surmounted relates to the immune resistance of large tumors. Here we reveal that immune resistance can be overcome by combining immunotherapy with a concerted attack on the tumor vasculature. The functionally related antitumor drugs 5,6-dimethylxanthenone-4-acetic acid (DMXAA) and flavone acetic acid (FAA), which cause tumor vasculature collapse and tumor necrosis, were used to attack the tumor vasculature, whereas the T-cell costimulator B7.1 (CD80), which costimulates T-cell proliferation via the CD28 pathway, was used to stimulate antitumor immunity. The injection of cDNA (60–180 µg) encoding B7.1 into large EL-4 tumors (0.8 cm in diameter) established in C57BL/6 mice, followed 24 h later by i.p. administration of either DMXAA (25 mg/kg) or FAA (300 mg/kg), resulted in complete tumor eradication within 2–6 weeks. In contrast, monotherapies were ineffective. Both vascular attack and B7.1 immunotherapy led to up-regulation of heat shock protein 70 on stressed and dying tumor cells, potentially augmenting immunotherapy. Remarkably, large tumors took on the appearance of a wound that rapidly ameliorated, leaving perfectly healed skin. Combined therapy was mediated by CD8+ T cells and natural killer cells, accompanied by heightened and prolonged antitumor cytolytic activity (P < 0.001), and by a marked increase in tumor cell apoptosis. Cured animals completely rejected a challenge of 1 x 107 parental EL-4 tumor cells but not a challenge of 1 x 104 Lewis lung carcinoma cells, demonstrating that antitumor immunity was tumor specific. Adoptive transfer of 2 x 108 splenocytes from treated mice into recipients bearing established (0.8 cm in diameter) tumors resulted in rapid and complete tumor rejection within 3 weeks. Although DMXAA and B7.1 monotherapies are complicated by a narrow range of effective doses, combined therapy was less dosage dependent. Thus, a broad range of amounts of B7.1 cDNA were effective in combination with 25 mg/kg DMXAA. In contrast, DMXAA, which has a very narrow range of high active doses, was effective at a low dose (18 mg/kg) when administered with a large amount (180 µg) of B7.1 cDNA. Importantly, combinational therapy generated heightened antitumor immunity, such that gene transfer of B7.1 into one tumor, followed by systemic DMXAA treatment, led to the complete rejection of multiple untreated tumor nodules established in the opposing flank. These findings have important implications for the future direction and utility of cancer immunotherapies aimed at harnessing patients’ immune responses to their own tumors.

Permian brachiopods from the Tupe formation, San Juan Province, Precordillera, Argentina

The brachiopod fauna from the Tupe Formation at La Herradura Creek, located on the west flank of Perico Hill, San Juan Province, Argentina, palaeogeographically belongs to the western sector of the Paganzo basin ('Guandacol embayment'). The stratigraphical section of the Tupe Formation at La Herradura Creek is the stratotype of the Tivertonia jachalensis-Streptorhynchus inaequiornatus biozone, was previously regarded as being of Late Carboniferous age but here is assigned to the earliest Permian (Asselian). We describe and review the biozone assemblage, which consists of Streptorhynchus inaequiornatus, Tivertonia jachalensis, Kochiproductus sp., Costatumulus sp., Coronalosia argentinensis, Tupelosia paganzoensis, Trigonotreta pericoensis, Septosyringothyris sp. aff. Septosyringothyris jaguelensis and Crurithyris? sp. This brachiopod assemblage is related to Indian and Australian Early Permian faunas and its presence in the La Herradura Creek section provides new evidence in support of an Asselian (Early Permian) age for the Tivertonia jachalensis-Streptorhynchus inaequiornatus biozone. This assemblage is also important for intra- and inter-basinal correlation because several of its characteristic species have been identified from other sections of the Paganzo basin and the Riacuteo Blanco basin. The proposed age for this biozone is consistent with the age of palynological data from slightly above the marine faunas from the stratotype locality.

The Permian brachiopod genus Trigonotreta Koenig and its occurrence in Argentina

A review of the Permian spiriferid brachiopod genus Trigonolrela and its occurrence in the Early Permian of Argentina is provided herein. Several species are known from the Late Palaeozoic sequences of the Argentinean Precordillera. These include Trigonolrela sp. and Trigonolrela riojanensis (Lech and Acenolaza), from the Rio del Peii.on Formation (Rio Blanco Basin), Trigonolrela pericoensis (Leanza), from the Tupe Formation at the La Herradura creek locality (Paganzo Basin) and Trigonolrela sanjuanensis (Lech and Acenolaza), from Del Salto Formation (Calingasta-Uspallata Basin). These species are characterised by being small to medium sized, relatively transverse, with cardinal extremities often strongly angular. Costae are weakly bifurcated and superimposed on weakly developed lateral flank plications adjacent to the fastigium and sulcus. The Argentinean species are close to the oldest known Indian species of the genus, Trigonotreta hesdoensis (Salmi and Dutt), particularly with respect to the nature of its weakly fasciculated costae. Further study will refine the details of the relationship of the South American species with those from elsewhere in Gondwana and may permit the recognition of a distinctive lineage. The presence of the genus in Argentina in the earliest Permian is an important palaeobiogeographical observation that raises questions about the probable migration routes of the genus from the western Gondwanan South American margin to eastern Australia and India. The Precordilleran region appears to be the likely site of the first appearance of Trigonolrela. Species with relatively simple costae appeared first. These gave rise to more complex species with a more elaborate costal pattern indicating an evolutionary progression through time.

Influence of chromium content on the dry machining performance of cathodic arc evaporated TiA1N coatings

Physical vapour deposition (PVD) titanium aluminium nitride coated cutting tools are used extensively in global manufacturing for reducing production costs and improving productivity in a number of aggressive metal-cutting operations, namely, dry and high-speed machining. In this investigation, the performance of Ti1−xAlxN and Ti1−x−yAlxCryN coatings was assessed on Co-HSS twist drills used to machine grey cast iron. The failure criterion for drills was defined as a critical sized flank wear land at the outer corners of the drills. Using this criterion, the average tool life of uncoated twist drills was increased by factors of 2.5, 3.0 and 3.0 by Ti0.59Al0.41N, Ti0.27Al0.19Cr0.54N and Ti0.21Al0.14Cr0.65N coatings, respectively. Notwithstanding the similar increase in average tool life, the Ti1−x−yAlxCryN coatings produced more consistent results than the Ti1−xAlxN coated drills with standard deviations of 67, 3 and 19 holes, respectively. This result has significant practical implications in manufacturing, since drills are not replaced on an individual basis, but rather on a preset tool change frequency. The present paper discusses the performance of Ti1−xAlxN and Ti1−x−yAlxCryN coated drills in terms of average and practical drill life and concludes with remarks on the characterisation of PVD coatings and their significance on the performance of Co-HSS twist drills when dry machining grey cast iron.

Weinstein, Blatter, Cavan, Wallace

Michael Weinstein (left) and George Wallace (right), respectively Chairman and Secretary of the Victorian Soccer Federation, flank Sepp Blatter (then General Secretary of FIFA) and Harry Cavan of Northern Ireland and Vice President of FIFA, during a 1980 planning meeting for the forthcoming World Youth Cup to be hosted by Australia in 1981.

Variation of fibre diameter coefficient of variation and fibre curvature across mohair fleeces: Implications for animal selection, genetic selection and fleece evaluation

The presentwork aimed to determine howthe average fibre diameter coefficient of variation (CVD) and fibre curvature (FC) differences between nine sampling sites vary between sex and flock, to identify differences in variability between sampling sites as a result of between animal and between sire variability and to determine correlations between sampling sites in between animal and between sire variability. Australian Angoras (n = 313) from two farms in southern Australia were sampled at 12 and 18 months of age at nine sites (mid side, belly, brisket, hind flank, hip, hock, mid back, neck, shoulder). Staples were taken prior to shearing at skin level and CVD and FC determined. For each shearing, differences in CVD and FC between sampling sites, how these differences were affected by farm, sex, and sire, and the covariance between sites for sire and individual animal effects were investigated by restricted maximum likelihood (REML) analyses. The median mid side CVD at 12 and 18 months of age ranged from 23.6 to 25.1% but the actual range was 16.8–34.2%. The median mid side FC at 12 and 18 months of age ranged from 14.4 to 18.6◦/mm but the actual range was 10.5–26.3◦/mm. The general pattern for CVDwas for the mid back, hip and neck sites to have similar CVD, the brisket, hind flank and hock sites to have larger CVD and the belly to have smaller CVD than the mid side site. The between animal variation for CVD was lowest at the mid back site. This implies that the mid back would be the most effective site for between animal selection for CVD. Heritabilities for CVD (range at 18 months 0.18–0.30) were only about half the heritabilities for mean fibre diameter in the same study. There was a marked anterior–posterior increase in FC at both farms and with both ages. The results give no clear indication of the best site for between animal selection for FC, other than that the hock should be avoided. Heritabilities for FC are moderate to high (range at 18 months 0.44–0.77) and the genetic correlations are high except for the hock. Thus genetic selection for FC at any site, other than the hock, should be effective for changing FC over the entire fleece. There was more variability between animals than between sites and sires. These results are put into context with associated research on variation in mean fibre diameter and staple length.

Variation of mohair staple length across Angora goat fleeces : implications for animal selection and fleece evaluation

The present study aimed to determine how the average mohair staple length (SL) differences between nine sampling sites vary between sex and flock, to identify differences in SL variability between sampling sites as a result of between-animal and between-sire variability and to determine SL correlations between sampling sites in between-animal and between-sire variability. Australian Angora goats (n=301) from two farms in southern Australia were sampled at 12 and 18 months of age at nine sites (mid side, belly, brisket, hind flank, hip, hock, mid back, neck and shoulder). Staples were taken prior to shearing at skin level and stretched SL determined. For each shearing, differences in SL between sampling sites, how these differences were affected by farm, sex and sire, and the covariance between sites for sire and individual animal effects were investigated by restricted maximum likelihood (REML) analyses. The median mid-side SL at 12 and 18 months of age was 110 and 130 mm, respectively, but the actual range in mid-side SL was 65–165 mm. There was an anterior–posterior decline in SL with the hock being particularly short. There was no evidence that the between-site correlation of the sire effects differed from 1, indicating that genetic selection for SL at one site will be reflected in SL over the whole fleece. However, low heritabilities of SL at the hock, belly and brisket or at any site at 12 months of age were obtained. There was more variability between sites than between sires, but the between-animal variation was greater. The hip and mid-back sites can be recommended for within-flock (culling) and genetic selection for SL due to their low sampling variability, moderate heritability and ease of location.

Evaluation of the thermal behaviour of bevelled cutting inserts using a numerical approach

The nose geometry of a hard and brittle metal cutting tool is generally modified in order to avoid the premature failure due to fracture under tensile stresses. While most research findings point to a favourable mechanical load pattern, the possible influence of the shape of the geometry on the thermal fields and the consequent changes in the stressed state of the tool seem to have attained less attention. The present work aims at establishing the thermal behaviour of bevelled tools under varying geometrical and process parameters. Data generated from statistically designed experiments and quick-stop chip samples are coupled to conduct numerical investigations using a mixed finite and boundary element solution to obtain the temperature distribution in bevelled carbide inserts. Due consideration is given to the presence of the stagnation zone and its size and shape. While the cutting forces and temperatures increased owing to the blunt shape of the tool, the possible absence of tensile stresses was found to be the likely effect of a more uniform temperature distribution resulting from a significant plastic contact on the principal flank and the consequent flank heat source. The characteristic low-temperature zones close to the nose of the conventional tool are taken over by the stagnation zone in bevelled tools. © IMechE 2007.

BlackBox4

I recognise John Wolseley’s method of interrogating the Australian landscape in Dunes Climbing a Mountain and South Flank of the Dune in my own re-animations of the landscape around Sea Lake. When such looking is directed at technology’s core rather than Nature, its noise produces ‘The Great Lalula’ (after Friedrich Kittler).

Wingbeat frequency and the body drag anomaly: wind-tunnel observations on a thrush nightingale (Luscinia Luscinia) and a teal (Anas crecca)

A teal (Anas crecca) and a thrush nightingale (Luscinia luscinia) were trained to fly in the Lund wind tunnel for periods of up to 3 and 16 h respectively. Both birds flew in steady flapping flight, with such regularity that their wingbeat frequencies could be determined by viewing them through a shutter stroboscope. When flying at a constant air speed, the teal's wingbeat frequency varied with the 0.364 power of the body mass and the thrush nightingale's varied with the 0.430 power. Both exponents differed from zero, but neither differed from the predicted value (0.5) at the 1 % level of significance. The teal continued to flap steadily as the tunnel tilt angle was varied from -1° (climb) to +6° (descent), while the wingbeat frequency declined progressively by about 11%. In both birds, the plot of wingbeat frequency against air speed in level flight was U-shaped, with small but statistically significant curvature. We identified the minima of these curves with the minimum power speed (Vmp) and found that the values predicted for Vmp, using previously published default values for the required variables, were only about two-thirds of the observed minimum-frequency speeds. The discrepancy could be resolved if the body drag coefficients (CDb) of both birds were near 0.08, rather than near 0.40 as previously assumed. The previously published high values for body drag coefficients were derived from wind-tunnel measurements on frozen bird bodies, from which the wings had been removed, and had long been regarded as anomalous, as values below 0.01 are given in the engineering literature for streamlined bodies. We suggest that birds of any size that have well-streamlined bodies can achieve minimum body drag coefficients of around 0.05 if the feet can be fully retracted under the flank feathers. In such birds, field observations of flight speeds may need to be reinterpreted in the light of higher estimates of Vmp. Estimates of the effective lift:drag ratio and range can also be revised upwards. Birds that have large feet or trailing legs may have higher body drag coefficients. The original estimates of around CDb=0.4 could be correct for species, such as pelicans and large herons, that also have prominent heads. We see no evidence for any progressive reduction of body drag coefficient in the Reynolds number range covered by our experiments, that is 21600-215 000 on the basis of body cross-sectional diameter.

Chip formation mechanism and machinability of wrought duplex stainless steel alloys

This paper investigates the chip formation mechanism and machinability of two-phase materials, such as, wrought duplex stainless steel alloys SAF 2205 and SAF 2507. SEM and optical microscopic details of the frozen cutting zone and chips revealed that the harder austenite phase dissipates in the advancement of the cutting tool, being effectively squeezed out of the softer ferrite phase. Microhardness profiles reveal correlation in hardness from the workpiece material transitioning to the chip. The tool wear (TiAIN + TiN coated solid carbide twist drill) and machining forces were investigated. Tool wear, was dominantly due to the adhesion process which developed from built-up edge formation, is highly detrimental to the flank face. Flute damage was also observed as a major issue in the drilling of duplex alloys leading to premature tool failure. Duplex 2507 shows higher sensitivity to cutting speed during machining and strain hardening at higher velocity and less machinability due to presence of higher percentage of Ni, Mo and Cr.

Weldability and machinability of duplex stainless steel

This chapter investigates two important processing methods, such as welding and machine of duplex stainless steel. The welding process welding generally degrades the properties of these materials by redistributing the phases during melting and solidification. On the other hand, the redistribution during machining mainly take place combined effect of stress, strain rate and temperature. Mechanism of machining process and several welding methods has been analysed in details. It was found that outcomes of welding processes depend on the welding methods. Most of the cases an appropriate annealing process can be used to restore the expected properties of the weld joints though the parameters of annealing process are different in different welding methods. Nonmetallic inclusions and the low carbon content of duplex stainless steel reduce the machinability of duplex stainless steel. SEM and optical microscopic details of the frozen cutting zone and chips revealed that the harder austenite phase dissipates in the advancement of the cutting tool, being effectively squeezed out of the softer ferrite phase. Abrasion and adhesion were the most common wear modes developed on the flank and rake faces. Adhesion wear being the most prevalent on the flank face, appeared to be initiated by built-up edge formation.

Impacts of wear and geometry response of the cutting tool on machinability of super austenitic stainless steel

This paper presents a study of tool wear and geometry response whenmachinability tests were applied under milling operations onthe Super Austenitic Stainless Steel alloy AL-6XN. Eight milling trials were executed under two cutting speeds, two feed rates, andtwo depths of cuts. Cutting edge profile measurements were performed to reveal response of cutting edge geometry to the cuttingparameters and wear. A scanning electron microscope (SEM) was used to inspect the cutting edges. Results showed the presenceof various types of wear such as adhesion wear and abrasion wear on the tool rake and flank faces. Adhesion wear represents theformation of the built-up edge, crater wear, and chipping, whereas abrasion wear represents flank wear.Thecommonly formed wearwas crater wear. Therefore, the optimum tool life among the executed cutting trails was identified according to minimum lengthand depth of the crater wear.The profile measurements showed the formation of new geometries for the worn cutting edges due toadhesion and abrasion wear and the cutting parameters.The formation of the built-up edge was observed on the rake face of thecutting tool. The microstructure of the built-up edge was investigated using SEM. The built-up edge was found to have the austeniteshear lamellar structure which is identical to the formed shear lamellae of the produced chip.

Metallurgical and machinability characteristics of wrought and selective laser melted Ti-6Al-4V

This research work presents a machinability study between wrought grade titanium and selective laser melted (SLM) titanium Ti-6Al-4V in a face turning operation, machined at cutting speeds between 60 and 180 m/min. Machinability characteristics such as tool wear, cutting forces, and machined surface quality were investigated. Coating delamination, adhesion, abrasion, attrition, and chipping wear mechanisms were dominant during machining of SLM Ti-6Al-4V. Maximum flank wear was found higher in machining SLM Ti-6Al-4V compared to wrought Ti-6Al-4V at all speeds. It was also found that high machining speeds lead to catastrophic failure of the cutting tool during machining of SLM Ti-6Al-4V. Cutting force was higher in machining SLM Ti-6Al-4V as compared to wrought Ti-6Al-4V for all cutting speeds due to its higher strength and hardness. Surface finish improved with the cutting speed despite the high tool wear observed at high machining speeds. Overall, machinability of SLM Ti-6Al-4V was found poor as compared to the wrought alloy.