Joint space-time trellis decoding and channel estimation in correlated fading channels

This letter addresses the issue of joint space-time trellis decoding and channel estimation in time-varying fading channels that are spatially and temporally correlated. A recursive space-time receiver which incorporates per-survivor processing (PSP) and Kalman filtering into the Viterbi algorithm is proposed. This approach generalizes existing work to the correlated fading channel case. The channel time-evolution is modeled by a multichannel autoregressive process, and a bank of Kalman filters is used to track the channel variations. Computer simulation results show that a performance close to the maximum likelihood receiver with perfect channel state information (CSI) can be obtained. The effects of the spatial correlation on the performance of a receiver that assumes independent fading channels are examined.

Precoder design for multi-antenna systems with temporally and spatially correlated fading channels

This paper addresses the problem of the design of a precoder for multiple transmit antenna communication systems with spatially and temporally correlated fading channels. Using the theories of matrix differential calculus, the paper derives a precoder for unitary space-time codes that can exploit the spatio-temporal correlation in the time-varying fading channels. The design criterion is based on minimizing the mean square error of the channel estimates. Computer simulation results show that a significant performance gain can be achieved by using the designed precoder.

Differential encoding technique for multi-antenna systems with correlated Rayleigh fading channels

Differential space-time modulation (DSTM) techniques developed for multi-antenna systems allow the receiver to detect the transmitted signal without the knowledge of the fading channels. It can be viewed as an extension of differential phase-shift keying (DPSK) in single antenna systems. In this paper, we derived the pairwise error probability upper bound of differential space-time coded systems with spatially correlated Rayleigh fading channels. Based on the performance analysis, we develop a novel DSTM scheme which can exploit the spatial correlation in the fading channels. It is found that by carefully designing the initial transmitted signal matrix, the performance of the differential space-time coded systems can be significantly improved.

MMSE precoder for unitary space–time codes in correlated time-varying channels

This letter addresses the problem of the design of a precoder for multiple transmit antenna communication systems with spatially and temporally correlated fading channels. By using the asymptotic (high signal-to-noise ratio) mean-square error of the channel estimates, the letter derives a precoder for unitary space-time codes that can exploit the spatiotemporal correlation in the time-varying fading channels. Simulation results illustrate that significant performance gains can be achieved by using the new precoder.

Channel estimation for two-way MIMO relay systems in frequency-selective fading environments

© 2002-2012 IEEE. In this paper, we investigate the channel estimation problem for two-way multiple-input multiple-output (MIMO) relay communication systems in frequency-selective fading environments. We apply the method of superimposed channel training to estimate the individual channel state information (CSI) of the first-hop and second-hop links for two-way MIMO relay systems with frequency-selective fading channels. In this algorithm, a relay training sequence is superimposed on the received signals at the relay node to assist the estimation of the second-hop channel matrices. The optimal structure of the source and relay training sequences is derived to minimize the mean-squared error (MSE) of channel estimation. Moreover, the optimal power allocation between the source and relay training sequences is derived to improve the performance of channel estimation. Numerical examples are shown to demonstrate the performance of the proposed superimposed channel training algorithm for two-way MIMO relay systems in frequency-selective fading environments.

Multi-input-multi-output antennas for radio frequency identification systems

In this chapter the authors discuss the physical insight of the role of wireless communication in RFID systems. In this respect, this chapter gives a brief introduction on the wireless communication model followed by various communication schemes. The chapter also discusses various channel impairments and the statistical modeling of fading channels based on the environment in which the RFID tag and reader may be present. The chapter deals with the fact that the signal attenuations can be dealt with up to some level by using multiple antennas at the reader transmitter and receiver to improve the performance. Thus, this chapter discusses the use of transmit diversity at the reader transmitter to transmit multiple copies of the signal. Following the above, the use of receiver combining techniques are discussed, which shows how the multiple copies of the signal arriving at the reader receiver from the tag are combined to reduce the effects of fading. The chapter then discusses various modulation techniques required to modulate the signal before transmitting over the channel. It then presents a few channel estimation algorithms, according to which, by estimating the channel state information of the channel paths through which transmission takes place, performance of the wireless system can be further increased. Finally, the Antenna selection techniques are presented, which further helps in improving the system performance.

Channel estimation for frequency-selective two-way MIMO relay systems

In this paper, we investigate the channel estimation problem for two-way multiple-input multiple-output (MIMO) relay communication systems in frequency-selective fading environments. We propose a superimposed channel training algorithm to estimate the individual channel state information (CSI) of the first-hop and second-hop links for two-way MIMO relay systems with frequency-selective fading channels. In this algorithm, a relay training sequence is superimposed on the received signals at the relay node to assist the estimation of the second-hop channel matrices. The optimal structure of the source and relay training sequences is derived to minimize the meansquared error (MSE) of channel estimation. We also derive the optimal power allocation between the source and relay training sequences. Numerical examples are shown to demonstrate the performance of the proposed algorithm.

Channel estimation for time-varying MIMO relay systems

In this paper, we investigate the channel estimation problem for multiple-input multiple-output (MIMO) relay communication systems with time-varying channels. The time-varying characteristic of the channels is described by the complex-exponential basis expansion model (CE-BEM). We propose a superimposed channel training algorithm to estimate the individual first-hop and second-hop time-varying channel matrices for MIMO relay systems. In particular, the estimation of the second-hop time-varying channel matrix is performed by exploiting the superimposed training sequence at the relay node, while the first-hop time-varying channel matrix is estimated through the source node training sequence and the estimated second-hop channel. To improve the performance of channel estimation, we derive the optimal structure of the source and relay training sequences that minimize the mean-squared error (MSE) of channel estimation. We also optimize the relay amplification factor that governs the power allocation between the source and relay training sequences. Numerical simulations demonstrate that the proposed superimposed channel training algorithm for MIMO relay systems with time-varying channels outperforms the conventional two-stage channel estimation scheme.

Superimposed channel training algorithm for time-varying MIMO relay systems

Two-way relaying systems are known to be capable of providing higher spectral efficiency compared with one-way relaying systems. However, the channel estimation problem for two-way relaying systems becomes more complicated. In this paper, we propose a superimposed channel training scheme for two-way MIMO relay communication systems, where the individ-ual channel information for users-relay and relay-users links are estimated. The optimal structure of the source and relay training sequences are derived when the mean-squared error (MSE) of channel estimation is minimized. We also optimize the power allocation between the source and relay training sequences to improve the performance of the algorithm. Numerical examples are shown to demonstrate the performance of the proposed channel training algorithm.

Blind equalization of non-irreducible and non-column-reduced channels driven by constant modulus signals

We address the blind equalization of finite-impulse-response (FIR), multiple-input multiple-output (MIMO) channels excited by constant modulus (CM) signals. It is known that the algorithms based on the constant modulus (CM) criterion can equalize an FIR MIMO channel that is irreducible and column-reduced. We show in this paper that the CM property of signals can be exploited to construct a zero-forcing equalizer for a non-irreducible and non-column-reduced channel. We also give a lower bound for the order of the equalizer. Simulation examples demonstrate the proposed result.

Blind equalization of non-irreducible channels driven by MPSK signals

This paper deals with the problem of blind equalization of finite-impulse-response (FIR) and multiple-input multiple-output (MIMO) channels excited by M-ary phase shift keying (MPSK) signals. It is known that the algorithms based on the constant modulus (CM) criterion can equalize an FIR MIMO channel that is irreducible. The irreducible condition is restrictive since it requires that all source signals arrive at the receiving antennas simultaneously. In this paper, we show that the CM criterion can also be used to construct a zero-forcing equalizer for a channel that is non-irreducible. We also derive a lower bound for the order of the equalizer. The proposed result is validated by numerical simulations.

Blind identification of FIR MIMO channels by decorrelating subchannels

We study blind identification and equalization of finite impulse response (FIR) and multi-input and multi-output (MIMO) channels driven by colored signals. We first show a sufficient condition for an FIR MIMO channel to be identifiable up to a scaling and permutation using the second-order statistics of the channel output. This condition is that the channel matrix is irreducible (but not necessarily column-reduced), and the input signals are mutually uncorrelated and of distinct power spectra. We also show that this condition is necessary in the sense that no single part of the condition can be further weakened without another part being strengthened. While the above condition is a strong result that sets a fundamental limit of blind identification, there does not yet exist a working algorithm under that condition. In the second part of this paper, we show that a method called blind identification via decorrelating subchannels (BIDS) can uniquely identify an FIR MIMO channel if a) the channel matrix is nonsingular (almost everywhere) and column-wise coprime and b) the input signals are mutually uncorrelated and of sufficiently diverse power spectra. The BIDS method requires a weaker condition on the channel matrix than that required by most existing methods for the same problem.

Effects of undoped and manganese-doped zinc oxide nanoparticles on the colour fading of dyed polyester fabrics

This paper describes the effects of applying coatings of an acrylic polymer containing nanoparticles of zinc oxide (ZnO) on the fading rate in artificial sunlight of polyester fabrics dyed with disperse dyes containing anthraquinone and benzopyran chromophores. Factors affecting the transparency and UV absorbance of the coatings are discussed. Removing the UV component of sunlight with ZnO nanoparticles markedly decreased the fading rate of the dyes, provided the polymer/ZnO film was not in direct contact with the fabric. When the treatment was applied directly to the fabrics, however, the protection against colour fading was different for the two dyes studied. Whereas the rate of colour fading of a benzopyran dye, of relatively low lightfastness, was decreased by the polymer-ZnO film, the treatment increased the fading rate of the dye of higher lightfastness, based on anthraquinone. This effect has been attributed to the generation of reactive oxygen species (ROS) when ZnO is exposed to UV. The effect of decreasing the photoactivity of ZnO by doping with manganese has been examined. For the benzopyran dye, the UV protection was greatly increased, whereas a much smaller improvement was found for the anthraquinone-based dye.