Improved membranes for the extraction of heavy metals

This work presents a series of experimental tests on new practical approaches in membrane design to improve extraction capacity and rate. We chose an extraction system involving Aliquat 336 as the extractant and Cd(II) as the metal ion to be extracted to demonstrate these new approaches. The core element in the new membrane assembly was the extractant loaded sintered glass filter. This membrane assembly provided a large interface area between the extractant and the aqueous solution containing metal ions. By recycling the aqueous solution through the membrane assembly, the extraction rate was significantly improved. The membrane assembly also offered good extraction capacity.

Extraction of compounds associated with water repellency in sandy soils of different origin

After an initial evaluation of several solvents, the efficiency of Soxhlet extractions with isopropanol/ammonia (s.g. 0.88) (70 : 30 v : v; 24 h) in extracting compounds associated with water repellency in sandy soils was examined using a range of repellent and wettable control soils (n = 15 and 4) from Australia, Greece, Portugal, The Netherlands, and the UK. Extraction efficiency and the role of the extracts in causing soil water repellency was examined by determining extract mass, sample organic carbon content and water repellency (after drying at 20°C and 105°C) pre- and post-extraction, and amounts of aliphatic C–H removed using DRIFT, and by assessing the ability of extracts to cause repellency in acid-washed sand (AWS).

Key findings are: (i) none of organic carbon content, amount of aliphatic C–H, or amount of material extracted give any significant correlation with repellency for this diverse range of soils; (ii) sample drying at 105°C is not necessarily useful before extraction, but may provide additional information on extraction effectiveness when used after extraction; (iii) the extraction removed repellency completely from 13 of the 15 repellent samples; (iv) extracts from all repellent and wettable control soils were capable of inducing repellency in AWS. The findings suggest that compounds responsible for repellency represent only a fraction of the extract composition and that their presence does not necessarily always cause repellency.

Critical assessment of various techniques for the extraction of carotenoids and co-enzyme Q10 from the Thraustochytrid strain ONC-T18

A variety of techniques for extracting carotenoids from the marine Thraustochytrium sp. ONC-T18 was compared. Specifically, the organic solvents acetone, ethyl acetate, and petroleum ether were tested, along with direct and indirect ultrasonic assisted extraction (probe vs bath) methods. Techniques that used petroleum ether/acetone/water (15:75:10, v/v/v) with 3 h of agitation, or 5 min in an ultrasonic bath, produced the highest extraction yields of total carotenoids (29−30.5 μg g^-1). Concentrations up to 11.5 μg g^-1 of canthaxanthin and 17.5 μg g^-1 of β-carotene were detected in extracts stored for 6 weeks. Astaxanthin and echinenone were also detected as minor compounds. Extracts with and without antioxidants showed similar carotenoid concentration profiles. However, total carotenoid concentrations were approximately 8% higher when antioxidants were used. Finally, an easy-to-perform and inexpensive method to detect co-enzymes in ONC-T18 was also developed using silica gel TLC plates. Five percent methanol in toluene as a mobile phase consistently eluted co-enzyme Q10 standards and could separate the co-enzyme fractions present in ONC-T18.

Improved extraction of heavy metal ions using membrane technology

Investigates tha application of polymer membranes in industrial wastewater treatment. Several novel membrane systems have been developed. The new systems overcome the problems of low extractant capacity and slow rate of extraction of the traditional membrane system. These new systems offer significant scope for the treatment of industrial wastewater containing heavy metal ions.

Automatic extraction of abnormal regions from lung images

A system that could automatically extract abnormal lung regions may assist expert radiologists in verifying lung tissue abnormalities. This paper presents an automated lung nodule detection system consisting of five components: acquisition, pre-processing, background removal, detection, and false positives reduction. The system employs a combination of an ensemble classification and clustering methods. The performance of the developed system is compared against some existing counterparts. Based 011 the experimental results, the proposed system achieved a sensitivity of 100% and a false-positives/slice of 0.67 for 30 tested CT images.

Extraction of copper(II) ions from aqueous solutions with a methimazole-based ionic liquid

The recently synthesized ionic liquid (IL) 2-butylthiolonium bis(trifluoromethanesulfonyl)amide, [mimSBu][NTf2], has been used for the extraction of copper(II) from aqueous solution. The pH of the aqueous phase decreases upon addition of [mimSBu]+, which is attributed to partial release of the hydrogen attached to the N(3) nitrogen atom of the imidazolium ring. The presence of sparingly soluble water in [mimSBu][NTf2] also is required in solvent extraction studies to promote the incorporation of Cu(II) into the [mimSBu][NTf2] ionic liquid phase. The labile copper(II) system formed by interacting with both the water and the IL cation component has been characterized by cyclic voltammetry as well as UV−vis, Raman, and 1H, 13C, and 15N NMR spectroscopies. The extraction process does not require the addition of a complexing agent or pH control of the aqueous phase. [mimSBu][NTf2] can be recovered from the labile copper−water−IL interacting system by washing with a strong acid. High selectivity of copper(II) extraction is achieved relative to that of other divalent cobalt(II), iron(II), and nickel(II) transition-metal cations. The course of microextraction of Cu2+ from aqueous media into the [mimSBu][NTf2] IL phase was monitored in situ by cyclic voltammetry using a well-defined process in which specific interaction with copper is believed to switch from the ionic liquid cation component, [mimSBu], to the [NTf2] anion during the course of electrochemical reduction from Cu(II) to Cu(I). The microextraction−voltammetry technique provides a fast and convenient method to determine whether an IL is able to extract electroactive metal ions from an aqueous solution.

Cloud-point extraction of phenanthrene by nonionic surfactants

Extraction and preconcentration of the model polycyclic aromatic hydrocarbon (PAH), phenanthrene, in aqueous solutions by two different kinds of nonionic ethoxylated alcohols, Tergitol 15-S-7 and Neodol 25-7, as extractants was studied at ambient temperature (22°C). Both surfactants have almost the same numbers of hydrocarbons and ethylene-oxide (EO) units, but differ in the location of the alcohols. Neodol 25-7 is a primary alcohol, while Tergitol 15-S-7 is a secondary one. The extraction process is based on the clouding phenomena of these two nonionic surfactants. Addition of sodium sulfate or sodium phosphate could decrease the cloud point temperatures of the surfactant solutions below the ambient temperatures, so that the cloud-point extraction process could be facilitated. Increasing the salt concentration or decreasing the surfactant concentration could improve the preconcentration factor, which is attributable to the decrease in the volume of surfactant-rich phase. Consequently, the recovery efficiency higher than 96% was achieved for phenanthrene in aqueous solution.

Extraction of silver(i) from aqueous solutions in the absence and presence of copper(ii) with a methimazole-based ionic liquid

The ionic liquid (IL) 2-butylthiolonium bis(trifluoromethanesulfonyl)amide, [mimSBu][NTf₂], facilitates the efficient extraction of silver(i) from aqueous media via interaction with both the cation and anion components of the IL. Studies with a conventional aqueous-IL two phase system as well as microextraction of silver(i) by a thick IL film adhered to an electrode monitored in situ by cyclic voltammetry, established that [mimSBu][NTf₂] can extract electroactive silver(i) ions from an aqueous solution. The pH of the aqueous phase decreases upon addition of [mimSBu]⁺, which is attributed to partial release of the hydrogen attached to the N(3) nitrogen atom of the imidazolium ring. The presence of silver(i) further increase the acidity of the aqueous phase as a consequence of coordination with the IL cation component. Voltammetric and ¹H and ¹³C NMR techniques have been used to establish the nature of the silver(i) complexes extracted, and show that the form of interaction with the IL differs from that outlined previously for the extraction of copper(ii). Insights on the competition established when silver(i) is extracted in the presence of copper(ii) are provided. Finally, it is noted that metallic silver can be directly electrodeposited at the electrode surface after extraction of silver(i) into [mimSBu][NTf₂] and that back extraction of silver(i) into aqueous media is achieved by addition of an acidic aqueous solution.

Toward automatic extraction of expressive elements from motion pictures : tempo

This paper addresses the challenge of bridging the semantic gap that exists between the simplicity of features that can be currently computed in automated content indexing systems and the richness of semantics in user queries posed for media search and retrieval. It proposes a unique computational approach to extraction of expressive elements of motion pictures for deriving high-level semantics of stories portrayed, thus enabling rich video annotation and interpretation. This approach, motivated and directed by the existing cinematic conventions known as film grammar, as a first step toward demonstrating its effectiveness, uses the attributes of motion and shot length to define and compute a novel measure of tempo of a movie. Tempo flow plots are defined and derived for a number of full-length movies and edge analysis is performed leading to the extraction of dramatic story sections and events signaled by their unique tempo. The results confirm tempo as a useful high-level semantic construct in its own right and a promising component of others such as rhythm, tone or mood of a film. In addition to the development of this computable tempo measure, a study is conducted as to the usefulness of biasing it toward either of its constituents, namely, motion or shot length. Finally, a refinement is made to the shot length normalizing mechanism, driven by the peculiar characteristics of shot length distribution exhibited by movies. Results of these additional studies, and possible applications and limitations are discussed.

Enzyme-assisted extraction of bioactives from plants

Demand for new and novel natural compounds has intensified the development of plant-derived compounds known as bioactives that either promote health or are toxic when ingested. Enhanced release of these bioactives from plant cells by cell disruption and extraction through the cell wall can be optimized using enzyme preparations either alone or in mixtures. However, the biotechnological application of enzymes is not currently exploited to its maximum potential within the food industry. Here, we discuss the use of environmentally friendly enzyme-assisted extraction of bioactive compounds from plant sources, particularly for food and nutraceutical purposes. In particular, we discuss an enzyme-assisted extraction of stevioside from Stevia rebaudiana, as an example of a process of potential value to the food industry.

Towards automatic extraction of expressive elements from motion pictures : tempo

This paper proposes a unique computational approach to extraction of expressive elements of motion pictures for deriving high level semantics of stories portrayed, thus enabling better video annotation and interpretation systems. This approach, motivated and directed by the existing cinematic conventions known as film grammar, as a first step towards demonstrating its effectiveness, uses the attributes of motion and shot length to define and compute a novel measure of tempo of a movie. Tempo flow plots are defined and derived for four full-length movies and edge analysis is performed leading to the extraction of dramatic story sections and events signaled by their unique tempo. The results confirm tempo as a useful attribute in its own right and a promising component of semantic constructs such as tone or mood of a film.

On the extraction of thematic and dramatic functions of content in educational videos

In this paper, we propose novel computational models for the extraction of high level expressive constructs related to, namely thematic and dramatic functions of the content shown in educational and training videos. Drawing on the existing knowledge of film theory, and media production rules and conventions used by the filmmakers. we hypothesize key aesthetic elements contributing to convey these functions of the content. Computational models to extract them are then formulated and their performance evaluated on a set of ten educational and training videos is presented.