Some unusual applications of the `Error-bar` feature in Excel spreadsheets

This paper demonstrates how the "error-bar" feature can be used to extend the utility of "worldware" spreadsheet packages in producing high-quality graphs for university teaching and learning, and for research. To further utilize the advantages of spreadsheets in university education, this paper seeks to overcome some of the earlier reservations about the lack of scientific plotting capabilities of spreadsheet applications. Specific examples of educational material in the areas of enzyme kinetics, vibrational spectroscopy, vibronic spectroscopy, and mass spectrometry are discussed. It is argued that, where practical, university educators should use "worldware" packages to prepare teaching aids, since these would better prepare their students for future employment. The use of software features for purposes that were not envisioned by the programmers has additional educational benefits in fostering flexibility and innovation. Other graphing packages can also use the "error-bar" feature in a manner similar to that described here for Excel.

A shape error metric for sheet metal forming and its application to springback

There are many variations within sheet metal forming, some of which are manifest in the final geometry of the formed component. It is important that this geometric variation be quantified and measured for use in a process or quality control system. The contribution of this paper is to propose a novel way of measuring the geometric difference between the desired shape and an actual formed "U" channel. The metric is based upon measuring errors in terms of the significant manufacturing variations. The metric accords with the manually measured errors of the channel set. The shape error metric is then extended to develop a simple empirical, whole-component, springback error measure. The springback error measure combines into one value all the angle springback and side wall curl geometric errors for a single channel. Two trends were observed: combined springback decreases when the blank holder force is increased; and the combined springback marginally decreases when the die radii is increased.

Prediction error property of the Lasso Estimator and its generalization

The lasso procedure is an estimator-shrinkage and variable selection method. This paper shows that there always exists an interval of tuning parameter values such that the corresponding mean squared prediction error for the lasso estimator is smaller than for the ordinary least squares estimator. For an estimator satisfying some condition such as unbiasedness, the paper defines the corresponding generalized lasso estimator. Its mean squared prediction error is shown to be smaller than that of the estimator for values of the tuning parameter in some interval. This implies that all unbiased estimators are not admissible. Simulation results for five models support the theoretical results.

Eulerian superpath approach to correct sequencing error in shotgun assembly

This work describes an error correction method based on the Euler Superpath problem. Sequence data is mapped to an Euler Superpath dynamically by Merging Transformation. With restriction and guiding rules, data consistency is maintained and error paths are separated from correct data: Error edges are mapped to the correct ones and after substitution (of error edges with right paths), corresponding errors in the sequencing data are eliminated.

What explains dissent on the High Court of Australia? An empirical assessment using a cointegration and error correction approach

This article examines the factors influencing the annual dissent rate on the High Court of Australia from its first full year of operation in 1904 up to 2001 within a cointegration and error correction framework. We hypothesize that institutional factors, socioeconomic complexity, and leadership style explain variations in the dissent rate on the High Court of Australia over time. The institutional factors that we consider are the Court's caseload, whether it had discretion to select the cases it hears, and whether it was a final court of appeal. To measure socioeconomic complexity we use the divorce rate, urbanization rate, and real GDP per capita. Our main finding is that in the long run and short run, caseload and real income are the main factors influencing dissent. We find that a 1 percent increase in caseload and real income reduce the dissent rate on the High Court of Australia by 0.3 percent and 0.6 percent, respectively, holding other factors constant.

EStream: online mining of frequent sets with precise error guarantee

In data stream applications, a good approximation obtained in a timely  manner is often better than the exact answer that’s delayed beyond the window of opportunity. Of course, the quality of the approximate is as important as its timely delivery. Unfortunately, algorithms capable of online processing do not conform strictly to a precise error guarantee. Since online processing is essential and so is the precision of the error, it is necessary that stream algorithms meet both criteria. Yet, this is not the case for mining frequent sets in data streams. We present EStream, a novel algorithm that allows online processing while producing results strictly within the error bound. Our theoretical and experimental results show that EStream is a better candidate for finding frequent sets in data streams, when both constraints need to be satisfied.

Reducing position error of cantilevered loads in motion systems

The positioning error of a large cantilevered mass that is actuated at its supported end is minimized as this mass travels at challenging high speeds and accelerations. An integrated approach is adopted to realize the task. After selecting the appropriate actuator that would provide higher rigidity, the system is viewed as a multi-degree of freedom system, and hence the concept of system-generated disturbance is introduced. This allows the use of appropriate mechanical design considerations and a proper generation of the kinematics commands to minimize such disturbance. A disturbance observer is then designed to detect and compensate the remaining disturbance, hence minimizing the positioning error.

An evolutionary computing approach to minimize dynamic hedging error

The objective of our present paper is to derive a computationally efficient genetic pattern learning algorithm to evolutionarily derive the optimal rebalancing weights (i.e. dynamic hedge ratios) to engineer a structured financial product out of a multiasset, best-of option. The stochastic target function is formulated as an expected squared cost of hedging (tracking) error which is assumed to be partly dependent on the governing Markovian process underlying the individual asset returns and partly on
randomness i.e. pure white noise. A simple haploid genetic algorithm is advanced as an alternative numerical scheme, which is deemed to be
computationally more efficient than numerically deriving an explicit solution to the formulated optimization model. An extension to our proposed scheme is suggested by means of adapting the Genetic Algorithm parameters based on fuzzy logic controllers.

The effects of clustered data on standard error estimates in covariance structure analysis : a field data application

Purpose – The purpose of this article is to present an empirical analysis of complex sample data with regard to the biasing effect of non-independence of observations on standard error parameter estimates. Using field data structured in the form of repeated measurements it is to be shown, in a two-factor confirmatory factor analysis model, how the bias in SE can be derived when the non-independence is ignored.

Design/methodology/approach – Three estimation procedures are compared: normal asymptotic theory (maximum likelihood); non-parametric standard error estimation (naïve bootstrap); and sandwich (robust covariance matrix) estimation (pseudo-maximum likelihood).

Findings – The study reveals that, when using either normal asymptotic theory or non-parametric standard error estimation, the SE bias produced by the non-independence of observations can be noteworthy.

Research limitations/implications – Considering the methodological constraints in employing field data, the three analyses examined must be interpreted independently and as a result taxonomic generalisations are limited. However, the study still provides “case study” evidence suggesting the existence of the relationship between non-independence of observations and standard error bias estimates.

Originality/value – Given the increasing popularity of structural equation models in the social sciences and in particular in the marketing discipline, the paper provides a theoretical and practical insight into how to treat repeated measures and clustered data in general, adding to previous methodological research. Some conclusions and suggestions for researchers who make use of partial least squares modelling are also drawn.

Online mining of frequent sets in data streams with error guarantee

For most data stream applications, the volume of data is too huge to be stored in permanent devices or to be thoroughly scanned more than once. It is hence recognized that approximate answers are usually sufficient, where a good approximation obtained in a timely manner is often better than the exact answer that is delayed beyond the window of opportunity. Unfortunately, this is not the case for mining frequent patterns over data streams where algorithms capable of online processing data streams do not conform strictly to a precise error guarantee. Since the quality of approximate answers is as important as their timely delivery, it is necessary to design algorithms to meet both criteria at the same time. In this paper, we propose an algorithm that allows online processing of streaming data and yet guaranteeing the support error of frequent patterns strictly within a user-specified threshold. Our theoretical and experimental studies show that our algorithm is an effective and reliable method for finding frequent sets in data stream environments when both constraints need to be satisfied.

Patient safety ethics and human error management in ED contexts part I : development of the global patient safety movement

In recent years there has been increasing recognition internationally that health care is not as safe as it ought to be and that patient safety outcomes need to be improved. To this end patient safety has become the focus of a world-wide endeavour aimed at reducing the incidence and impact of preventable human errors and related adverse events in health care domains. The emergency department has been identified as a significant site of preventable human errors and adverse events in the health care system, raising important questions about the nature of human error management and patient safety ethics in rapidly changing environments. In this article (the first of a two-part discussion on the subject) an overview of the incidence and impact of preventable adverse events in ED contexts is explored. The development of a ‘culture of safety’ in other hazardous industries and the ‘lessons learned’ and applied to the health care industry are also briefly examined. In a second article (to be presented as Part II), some of the ethical tensions that have arisen in the context of implementing patient safety processes and their possible implications for ED contexts are explored.

Patient safety ethics and human error management in ED contexts Part II : Accountability and the challenge to change

In recent years there has been increasing recognition internationally that health care is not as safe as it ought to be and that patient safety outcomes need to be improved. To this end, patient safety has become the focus of a world-wide endeavour – endorsed by the World Health Organisation – to reduce the incidence and impact of preventable human errors and related adverse events in health care domains. The emergency department has been identified as a significant site of preventable human errors and adverse events in the health care system, raising important questions about the nature of human error management and patient safety ethics in rapidly changing environments, of which the Emergency Department is a prime example. In Part I of this article series, an overview of the incidence and impact of preventable adverse events in Emergency Department contexts and the development of the global patient safety movement was presented. In this second article brief attention is given to examining some of the ethical tensions that have arisen in response to the patient safety movement and their possible implications for Emergency Department contexts and staff.

Where did we go wrong? An examination of students treatment of experimental error in engineering mechanics laboratories

The ability of engineers and applied scientists to undertake experimental measurements is a fundamental requirement of the profession. However, it is not simply good enough to be able to perform experiments if we are not able to interpret the results. In this study, reports prepared by mechanical engineering students were examined to determine how students dealt with the disparity between experimental measurements and theoretical results in their Engineering Mechanics laboratories. Analysis of the reports, and discussions with students in their laboratory classes, revealed a superficial understanding or regard for experimental error. This superficial treatment of experimental error is, most likely, due to a number of factors that are discussed. Some possible strategies for addressing the issue are also examined.