Lifecycle environmental impact and cost analyses of steel bridge piers with seismic risk

Lifecycle approaches have found their wide applications in analyzing, evaluating and assessing technologies and management methods in the infrastructure systems. While environmental problems such as global warming have become a serious issue in the world, researchers and practicing engineers in civil engineering have to pay attention to environmental impacts as well as function, safety, cost and aesthetics in the
whole lifecycle of civil infrastructures. In addition to the normal lifecycle activities accompanied with operation and aging, the effects of natural hazards such as earthquakes with a low occurrence probability but a high
hazard loss require a full consideration in determining both lifecycle cost and lifecycle environmental impact. In this research, an approach is proposed to predetermine the lifecycle environmental impact and costs of bridges from their construction and maintenance as well as the losses and recovery after natural hazards. Based on this research, it becomes possible to quantitatively outline the roles of bridge construction, maintenance and earthquake in both environmental impact and cost in the whole lifetime of a bridge, especially their constituent parts from seismic losses and recoveries.

What can Australia learn from the Europeans about public participation? Article 6 of the Aarhus Convention and environmental impact statements

The United Nations Economic Commission for Europe Convention on Access to Information, Public Participation in Decision-Making and Access to Justice in Environmental Matters (Aarhus Convention) is the only international convention that is exclusively devoted to public participation in environmental matters. Although it is European in origin, much of the detail of the Convention draws upon national environmental legislation, including aspects of the Australian environmental legal system. This article compares the public review provisions relating to environmental impact statements in Australia with Art 6 of the Convention governing "Public Participation in Decisions on Specific Activities". The article finds that much of the Australian laws with some exceptions satisfy the minimum requirements of public participation in Art 6.

Environmental impact assessment of the sewage outfall at Davis Station, East Antarctica

During the summer 2009/10, an environmental impact assessment of the sewage outfall was conducted at Davis Station, East Antarctica. An investigation of the nature and extent of impacts to the marine environment associated with current sewage treatment and effluent discharge practices included ecological surveys of macrobiological communities, physico-chemical analysis of sediments and receiving waters, microbiological analysis, and histopathological analysis of fish. Ecotoxicological testing using local invertebrates to determine effluent toxicity was interpreted alongside dispersal modelling data of the discharge plume to determine the potential extent of impacts and inform recommendations on the level of treatment and dilution of sewage required to minimise impacts. No evidence of impacts was detected on soft sediment infaunal or epifaunal communities, and only low levels of contamination and accumulation were found in sediments and waters in the immediate vicinity of the outfall and in the direction of primary current flow. In contrast, sterol biomarkers and faecal coliforms (E. coli) were detected in sediments collected adjacent to the outfall and in most water column samples. Marine invertebrates (Abatus and Laternula) also tested positive for E. coli and antibiotic resistance mechanisms were present in Laternula indicating the introduction and dispersal through the water column of foreign microbes and bacteria associated with human effluent. Fish (Trematomus bernacchii) close to the outfall showed significant histological alterations in all major tissues (liver, gill, gonad, muscle) resulting from exposure to sewage. Effluent was toxic to amphipods (Paramoera walkeri) and microgastropods (Skenella paludionoides), with reduced survival in concentrations as low as 3.125% over a 21d exposure period. Acute effects were also observed in both species following 24h exposure, with 100% mortality at the highest effluent concentrations tested (68%). The application of these results to support and guide decisions regarding the planned installation of new sewage treatment facilities at Davis will be discussed.

The environmental impact of sewage and wastewater outfalls in Antarctica: an example from Davis station, East Antarctica

We present a comprehensive scientific assessment of the environmental impacts of an Antarctic wastewater ocean outfall, at Davis station in East Antarctica. We assessed the effectiveness of current wastewater treatment and disposal requirements under the Protocol on Environmental Protection to the Antarctic Treaty. Macerated wastewater has been discharged from an outfall at Davis since the failure of the secondary treatment plant in 2005. Water, sediment and wildlife were tested for presence of human enteric bacteria and antibiotic resistance mechanisms. Epibiotic and sediment macrofaunal communities were tested for differences between sites near the outfall and controls. Local fish were examined for evidence of histopathological abnormalities. Sediments, fish and gastropods were tested for uptake of sewage as measured by stable isotopes of N and C. Escherichia coli carrying antibiotic resistance determinants were found in water, sediments and wildlife (the filter feeding bivalve Laternula eliptica). Fish (Trematomus bernacchii) within close proximity to the outfall had significantly more severe and greater occurrences of histopathological abnormalities than at controls, consistent with exposure to sewage. There was significant enrichment of (15)N in T. bernacchii and the predatory gastropod Neobuccinum eatoni around the outfall, providing evidence of uptake of sewage. There were significant differences between epibiotic and sediment macrofaunal communities at control and outfall sites (<1.5 km), when sites were separated into groups of similar habitat types. Benthic community composition was also strongly related to habitat and environmental drivers such as sea ice. The combined evidence indicated that the discharge of wastewater from the Davis outfall is causing environmental impacts. These findings suggest that conditions in Antarctic coastal locations, such as Davis, are unlikely to be conducive to initial dilution and rapid dispersal of wastewater as required under the Protocol on Environmental Protection to the Antarctic Treaty. Current minimum requirements for wastewater treatment and disposal in Antarctica are insufficient to ameliorate these risks and are likely to lead to accumulation of contaminants and introduction of non-native microbes and associated genetic elements. This new understanding suggests that modernised approaches to the treatment and disposal of wastewater are required in Antarctica. The most effective solution is advanced levels of wastewater treatment, which are now possible, feasible and a high priority for installation. As a direct outcome of the study, a new advanced treatment system is being installed at Davis, effectively avoiding environmental risks.

The impact of general and carbon-related environmental knowledge on attitudes and behaviour of US consumers

Global warming and carbon emissions have gained international attention. However, it would appear that consumers are still unclear about what it encompasses and how it relates to their individual behaviour. Using the Theory of Reasoned Action (TRA) as a guiding framework, this study presents a structural equation model that tests the relationships between carbon and environmental knowledge, environmental attitude and behaviour using a sample of US consumers. The findings of the research suggest that a positive relationship was found between general and carbon-specific knowledge, attitude towards the environment, and general and carbon-specific behaviours. Therefore, general and carbon-specific environmental behaviours are related and may be driven by general attitudes and knowledge (i.e. both carbon-specific and general environmental knowledge). The implications of the study would suggest that marketers, working in tandem with government policymakers, need to focus efforts on developing consumers’ knowledge about specific sub-issues, such as global warming. However, additional research needs to be undertaken to develop marketing communication that accurately reflects the environmental impact of consumption behaviour, thereby allowing for considered consumption.

Environmental Assessment of Rammed Earth Construction Systems

Present concerns for sustainable development have led to a revival of traditional building practices using natural or recycled resources. There is a perception that buildings constructed from such materials are environmentally benign. This perception is questionable, as often no evaluation is undertaken to assess the associated environmental impacts. Rammed earth is one such construction technology that has seen renewed interest in recent years. The energy required to manufacture materials (i.e. embodied energy) is a significant component of the life cycle energy associated with buildings. This paper assesses the embodied energy of rammed earth construction relative to brick veneer and cavity brick construction. Rammed earth was found to have significantly less embodied energy than cavity brick construction (to which it is closer in thermal performance), but was approximately equivalent to brick veneer construction. Topics of further research identified include thermal performance and strategies for reducing the embodied energy of cement used for earth stabilisation.

Ecologically sustainable development and architecture: the impact of rating tools

The concept of Ecologically Sustainable Development (ESD) has become an important issue – albeit often scarcely applied – in the design of commercial buildings. To encourage the adoption of sustainable strategies in the practice of design and to address the environmental problems caused by these developments, governments and organisations of various countries have proposed the adoption of scorecard rating tools to inform designers of the impact of their decisions and to present a way of establishing project goals and objectives early in the design process. In Australia, the recent introduction of the Green Star Rating Tool (Office Design) is believed to provide the architects with a ‘whole-of-building’ assessment of the environmental impact of their design by creating a checklist against which to benchmark performance. This paper follows the design of a commercial building, evaluating the impact of Green Star in the overall process. The results of the study suggest the need to include the use of scorecard rating tools in a more integrated model, where ESD is considered at every stage of design and construction rather than being a separate component applied only to promote the ‘greenness’ of a building. Rating tools can be an asset to the design team, provided sustainable requirements are reinforced throughout the entire process.

Review of interventions to encourage SMEs to make environmental improvements

Small and medium-sized enterprises (SMEs) are an important part of the world economy but they are thought to be responsible for around 60% of all carbon dioxide emissions and 70% of all pollution. SMEs often have major problems with limited resources, limited knowledge, and limited technical capabilities to deal with their own negative environmental impact. SMEs exhibit widely differing characteristics and commitment where environmental issues are concerned. Yet under these conditions they are all expected to engage in environmental improvement. Interventions that encourage environmental improvement are often polarised between regulation and legislation at one extreme and voluntary environmental agreement at the other. It is clear that a holistic mixture of interventions is necessary to achieve maximum engagement and environmental improvement by all SMEs. In this paper we categorise the different levels of environmental commitment observed in SMEs and develop a selection or ‘toolkit’ of intervention strategies that might be deployed within each category of SME.

Intervention strategies to engage small and medium sized enterprise in environmental good practice

Small and medium sized enterprises (SMEs) are an important part of the world economy but they are thought to be responsible for around 60% of all carbon dioxide emissions by businesses in the UK and 70% of all pollution. SMEs often have major problems with limited resources, limited knowledge and limited technical capabilities to deal with their own environmental impact. SMEs exhibit widely differing characteristics and behaviours where environmental issues are concerned. Yet under these conditions they are all expected to engage in environmentally responsible business for the greater good of society. Interventions that encourage good environmental behaviour are often polarised between regulation and legislation at one extreme and voluntary environmental agreements at the other. It is clear that a holistic mixture of interventions is necessary to achieve maximum engagement by all SMEs. This paper categorises the main behaviours observed in SMEs towards environmental issues and develops a selection or 'tool kit' of intervention strategies that might be deployed within each category of SME for maximum effect.

The impact of small business on the environment

Objectives: Small businesses are estimated to contribute a significant proportion of global pollution, yet there is little empirical evidence to support this claim. The main aim of this research was to conduct an exploratory analysis of small business’s environmental impact in terms of waste, water and energy.

Prior work: Due to the negative impact small businesses are reported to have on the environment, their disengagement in environmental management practices has caused international concern. Much of the literature has concentrated on identifying the barriers and drivers of small business engagement. Little empirical work being conducted on the actual impact of they have on the environment or on the influence of the local context on their environmental practices.

Approach: A survey was developed and distributed to 466 small businesses within two light industrial areas in Perth Western Australia, which achieved a response rate of 87%. This survey will be replicated after a 12 month intervention is conducted. The two light industrial areas were selected as their Local Government Authorities are looking for businesses within their boundaries to improve their environmental performance.

Results: Initial results suggest that the small businesses do have a considerable impact on the environment in terms of waste disposal. Moreover, their environmental management practices concerning waste, energy and water were found to differ depending on the local contexts in which the small businesses operate.

Implications: As small businesses are both economically and socially important to all major industrialised nations, empirical research that provides evidence of their impact on the environment is critical. The implication here is that if the context in which these businesses operate influences the practices employed, developing strategies that acknowledge the influence and consequences of context may be more effective than those currently available. Differences identified within practices suggest that greater awareness and education is needed on water management than energy or waste, as this is the area where small business owner-managers have shown they have less knowledge and/or active engagement.

Value: This research is valuable in three ways. First, it adds to the knowledge of small business impact on the environment. Second, it identifies that context may be a factor that needs to be considered when developing strategies to engage small businesses in environmental management. Finally, it shows that the environmental management of water is the least well established environmental priority of small businesses at this time.

The impact of textile wet colouration on the environment in 2011

Wet textile colouration has the highest environmental impact of all textile processing steps. It consumes water, chemicals and energy and produces liquid, heat and gas waste streams. Liquid effluent streams are often quite toxic to the environment. There are a number of different dyeing processes, normally fibre type specific, and each has a different impact on the environment. This research investigated the energy, chemical and water requirements for the exhaust colouration of cotton, wool, polyester and nylon. The research investigated the liquid waste biological and chemical oxygen demand, salinity, pH and colour along with the energy required for drying after colouration. Polyester fibres had the lowest impact on the environment with lowest water and energy consumption in dyeing, good dye bath exhaustion, the lowest salinity levels in their effluent, relatively neutral pH effluent and low energy in drying. The wool and nylon had similar dye bath requirements and outputs however the nylon could be dyed at far lower liquor ratios and hence provided better energy and water use figures. The cotton and wool required high energy consumption in drying after colouration. Cotton performed poorly in all of the measured parameters.

The impact of textile wet colouration on the environment in 2011

Wet textile colouration has the highest environmental impact of all textile processing steps. It consumes water, chemicals and energy and produces liquid, heat and gas waste streams. Liquid effluent streams are often quite toxic to the environment. There are a number of different dyeing processes, normally fibre type specific, and each has a different impact on the environment. This research investigated the energy, chemical and water requirements for the exhaust colouration of cotton, wool, polyester and nylon. The research investigated the liquid waste biological oxygen demand, total organic carbon dissolved solids, suspended solids, pH and colour along with the energy required for drying after colouration. Polyester fibres had the lowest impact on the environment with low water and energy consumption in dyeing, good dye bath exhaustion, the lowest dissolved solids levels in waste water, relatively neutral pH effluent and low energy in drying. The wool and nylon had similar dyebath requirements and outputs however the nylon could be dyed at far lower liquor ratios and hence provided better energy and water use figures. Cotton performed badly in all of the measured parameters.

Is the grass greener on the other side? a review of the Asia-Pacific sport industry’s environmental sustainability practices

In recent years, sport entities have begun to prioritise environmental sustainability (ES) initiatives in their business strategies with the aim of minimising their environmental impact and engaging stakeholders within the ES movement. There has been minimal academic consideration of the ES movement in professional sport, particularly outside of North America and Europe. The aim of the present study is to provide an overview of the type and profile of ES initiatives being undertaken and communicated to stakeholders in the Asia-Pacific region by the industry bodies. Further, the study offers a conceptual model of the global-, country-, industry- and organisational-level forces impacting these sporting organisations’ ES practices. Various communication mediums of 114 professional sport teams from seven countries—Australia, India, New Zealand, Japan, China, Taiwan and Korea—were evaluated using content analysis. The results reveal low communication of ES practices by professional sport teams in the Asia-Pacific region compared to North America. Extended findings on the existing global profile of ES engagement provide a descriptive understanding of the ES movement in the Asia-Pacific region, and contribute to the identification of possible antecedents and correlatives to be evaluated in future research.

Reflections of environmental management implementation in furniture

The purpose of this paper is to present an overview of environmental management initiatives in the furniture retail area. The specific aim is to present reflections of participants implementing environmental initiatives in an Australian furniture retailer, Living Edge, in alignment with a secondary snapshot of environmental initiatives from other furniture retailers. Design/methodology/approachPrimary reflections from the retailer’s manager and external consultant, both involved in the implementation of environmental initiatives, are enriched with secondary review of environmental management system trends and examples from regions active in the designer furniture sector, including Europe, Southeast Asia and North America. FindingsAn integrated view has been distilled around environmental impact in the furniture supply chain and consumer pressure to minimise the impact. Stakeholders require furniture retailers to improve efficiency and profitability amid the countervailing market demand for environmental sustainability. Retailers may seek competitive advantage through effectively applied and communicated environmental management. The voluntary adoption of systems, international standards and innovative practices that conserve natural resources are amongst the key to success. A live case example of Australian experience is added to the knowledge base for the global retail furniture industry. Research limitations/implicationsOne Australian retailer is exemplified to highlight the lived experiences of implementing environmental initiatives. The secondary global review presents a cross-section rather than an in-depth analysis of furniture sector retailers. Originality/valueThere are limited Australian perspectives of designer furniture and its intersection with environmental issues, thus, the paper addresses this gap in the literature and adds to informed practice in a global industry.

Thermal simulation studies of a low energy university building in Australia

A key criterion by which any building will be judged when its environmental impact is assessed is its thermal performance. This paper describes the simulation of an office module in a three-storey university building in south eastern Australia. The module, located at the north-west corner of the top floor of the building, was chosen because it is likely to have the highest cooling load - a primary concern of energy conscious designers of commercial buildings for most parts of Australia.

In the paper, the initial key assumptions are stated, together with a description of a "reference" or base case, against which improvements in thermal performance were measured. The simulation process identified the major influences on thermal performance. This enabled changes in materials and construction, as well as basic design concepts to be evaluated. Features incorporated into the base case such as a metal roof and glazed walkway were found to have adverse influence on energy consumption, and were consequently rejected in preference for an improved design which included a hypocaust slab system on the roof of the office module. The final design was predicted to reduce the annual energy consumption for heating and cooling by 72% and 76% respectively.

La performance thermique est l'un des critegraveres cleacutes de l'eacutevaluation environnementale de tout bacirctiment. Cet article deacutecrit la simulation d'un module de bureau appartenant agrave un immeuble de trois eacutetages d'une universiteacute du sud-est de l'Australie. Ce module, situeacute agrave l'angle nord-ouest de l'eacutetage supeacuterieur du bacirctiment a eacuteteacute choisi car c'eacutetait lui qui, vraisemblablement, avait la charge de refroidissement la plus eacuteleveacutee, ce qui est une preacuteoccupation majeure des concepteurs conscients des problegravemes d'eacutenergie des bacirctiments commerciaux dans la plus grande partie du pays. Le processus de simulation a fait apparaicirctre trois influences principales sur la performance thermique par rapport agrave un cas de base. Cela a permis d'eacutevaluer les modifications apporteacutees aux mateacuteriaux et agrave la construction ainsi qu'aux avant-projets. Les caracteacuteristiques inteacutegreacutees dans le cas de base comme le toit meacutetallique et la passerelle vitreacutee avaient une influence neacutefaste sur la consommation d'eacutenergie et ont donc eacuteteacute rejeteacutees au beacuteneacutefice d'un concept ameacutelioreacute qui comprenait une dalle de type hypocauste sur le toit du module de bureau. Le concept final devrait reacuteduire la consommation annuelle d'eacutenergie pour le chauffage et le refroidissement de 72 % et 76 % respectivement, ce qui donne une ideacutee de la valeur ajouteacutee au processus de production agrave partir de proceacutedures avanceacutees de modeacutelisation et de simulation.