Multi-point and multi-level solar integration into a conventional coal-fired power plant

Solar-aided power generation (SAPG) is capable of integrating solar thermal energy into a conventional thermal power plant, at multi-points and multi-levels, to replace parts of steam extractions in the regenerative Rankine cycle. The integration assists the power plant to reduce coal (gas) consumption and pollution emission or to increase power output. The overall efficiencies of the SAPG plants with different solar replacements of extraction steam have been studied in this paper. The results indicate that the solar thermal to electricity conversion efficiencies of the SAPG system are higher than those of a solar-alone power plant with the same temperature level of solar input. The efficiency with solar input at 330 °C can be as high as 45% theoretically in a SAPG plant. Even the low-temperature solar heat at about 85 °C can be used in the SAPG system to heat the lower temperature feedwater, and the solar to electricity efficiency is nearly 10%. However, the low-temperature heat resource is very hard to be used for power generation in other types of solar power plants. Therefore, the SAPG plant is one of the most efficient ways for solar thermal power generation.

Power plant cooling technologies : hybrid cooling systems can save water

In addition to water saving, the hybrid cooling concept presented in this book also has the potential to improve energy efficiency and possibly reduce CO2 emission by recovering and upgrading the 'waste' energy from the cooling water stream.Yilmaz and Kouzani are at Deakin Uni, Hessami is at Monash Uni, Hu is at Uni of Adelaide.

Effects of baffles on flow distribution in an electrostatic precipitator (ESP) of a coal based power plant

Electrostatic Precipitators (ESP) are the most reliable and industrially used control devices to capture fine particles for reducing exhaust emission. Its efficiency is 99% or more. However, capturing submicron particles which are hazardous is still a problem as it involves complex flow phenomena and ESP design limitations. In this study, the effect of baffles on flow distribution inside the ESP is investigated computationally. Baffles are expected to increase the residence time of flue gas which helps to collect more particles into the collector plates, and hence increase the collection efficiency of an ESP. Besides, the placement of a baffle is likely to cause swirling of flue gas and hence sub-micron particles move towards the collector plate due to eccentric and electrostatic force. Therefore, the effects of position, shape and thickness of the baffles on collection efficiency which are also important for ESP design are reported in this study. The fluid flow distribution has been modelled using computational fluid dynamics (CFD) software Fluent and the result and outcome are presented and discussed. The result shows that baffles have significant influence on fluid flow pattern and the efficiency of ESP.

Enron's Dabhol power project in India

In the early nineties, Enron USA went to India to set up a $3 billion power plant at the express invitation of the then Indian government. The process and incidents associated with the setting up of the Dabhol Power Company are highly relevant, even in current times, for companies who intend to set up operations in India. The case is a good example of the strategic importance of ethical corporate decision-making and good stakeholder management practices as an inherent part of a company's culture. If a company lacks this understanding, then it is likely to experience stakeholder opposition and stakeholder management disasters that can ultimately have a serious impact on the company's success.

Static output feedback frequency stabilization of time-delay power systems with coordinated electric vehicles state of charge control

In this paper, for the first time, electric vehicles are used for both the primary and secondary frequency controls to support power plants to rapidly suppress fluctuations in the system frequency due to load disturbances. Via networked control and wide-area communication infrastructures, multiple interval time-varying delays exist in the communication channels between the control center, power plant, and an aggregation of electric vehicles. By coordinating batteries’ state of charge control, the behaviors of the vehicle owners and the uncertainties imposed by the changes of the batteries’ state of charge are taken intoconsideration. A power system model incorporating multiple time-varying delays and uncertainties is first proposed. Then, a robust static output feedback frequency controller is designed to guarantee the resulting closed-loop system stable with an H∞ attenuation level. By utilizing a novel integral inequality, namely refined-Jensen inequality, and an improved reciprocally convex combination, the design conditions are formulated in terms of tractable linear matrix inequalities which can be efficiently solved by various computational tools. The effectiveness of the proposed control scheme is verified by extensive simulations.

Mining small databases by collecting knowledge

Current data mining techniques may not be helpful for mining some companies/organizations such as nuclear power plants and earthquake bureaus, which have only small databases. Apparently, these companies/organizations also expect to apply data mining techniques to extract useful patterns in their databases so as to make their decisions. However, data in these databases such as the accident database of a nuclear power plant and the earthquake database in an earthquake bureau, may not be large enough to form any patterns. To meet the applications, we present a new mining model in this paper, which is based on the collecting knowledge from such as Web, journals, and newspapers.

Research progress and materials selection guidelines on mixed conducting perovskite-type ceramic membranes for oxygen production

Oxygen production by air separation is of great importance in both environmental and industrial processes as most large scale clean energy technologies require oxygen as feed gas. Currently the conventional cryogenic air separation unit is a major economic impediment to the deployment of these clean energy technologies with carbon capture (i.e. oxy-fuel combustion ). Dense ceramic perovskite membranes are envisaged to replace the cryogenics and reduce O2 production costs by 35% or more; which can significantly cut the energy penalty by 50% when integrated in oxy-fuel power plant for CO2 capture. This paper reviews the current progress in the development of dense ceramic membranes for oxygen production. The principles, advantages or disadvantages, and the crucial problems of all kinds of membranes are discussed. Materials development, optimisation guidelines and suggestions for future research direction are also included. Some areas already previously reviewed are treated with less attention.

An online pruning strategy for supervised ARTMAP-based neural networks

Identifying an appropriate architecture of an artificial neural network (ANN) for a given task is important because learning and generalisation of an ANN is affected by its structure. In this paper, an online pruning strategy is proposed to participate in the learning process of two constructive networks, i.e. fuzzy ARTMAP (FAM) and fuzzy ARTMAP with dynamic decay adjustment (FAMDDA), and the resulting hybrid networks are called FAM/FAMDDA with temporary nodes (i.e. FAM-T and FAMDDA-T, respectively). FAM-T and FAMDDA-T possess a capability of reducing the network complexity online by removing unrepresentative neurons. The performances of FAM-T and FAMDDA-T are evaluated and compared with those of FAM and FAMDDA using a total of 13 benchmark data sets. To demonstrate the applicability of FAM-T and FAMDDA-T, a real fault detection and diagnosis task in a power plant is tested. The results from both benchmark studies and real-world application show that FAMDDA-T and FAM-T are able to yield satisfactory classification performances, with the advantage of having parsimonious network structures.

Condition monitoring and fault prediction via an adaptive neural network

This paper describes the application of an adaptive neural network, called Fuzzy ARTMAP (FAM), to handle fault prediction and condition monitoring problems in a power generation station. The FAM network, which is supplemented with a pruning algorithm, is used as a classifier to predict different machine conditions, in an off-line learning mode. The process under scrutiny in the power plant is the Circulating Water (CW) system, with prime attention to monitoring the heat transfer efficiency of the condensers. Several phases of experiments were conducted to investigate the `optimum' setting of a set of parameters of the FAM classifier for monitoring heat transfer conditions in the power plant.

'Catastrophic failure' theories and disaster journalism : evaluating media explanations of the Black Saturday bushfires

 In recent decades, academic researchers of natural disasters and emergency management have developed a canonical literature on ‘catastrophe failure’ theories such as disaster responses from US emergency management services (Drabek, 2010; Quarantelli, 1998) and the Three Mile Island nuclear power plant (Perrow, 1999). This article examines six influential theories from this field in an attempt to explore why Victoria’s disaster and emergency management response systems failed during Australia’s Black Saturday bushfires. How well, if at all, are these theories understood by journalists, disaster and emergency management planners, and policy-makers? In examining the Country Fire Authority’s response to the fires, as well as the media’s reportage of them, we use the 2009 Black Saturday bushfires as a theory-testing case study of failures in emergency management, preparation and planning. We conclude that journalists can learn important lessons from academics’ specialist knowledge about disaster and emergency management responses.

Applications of redundancy analysis for the detection of chemical response patterns to air pollution in lichen

The lichens Ramalina celastri (Spreng.) Krog & Swinsc., Punctelia microsticta (Müll. Arg.) Krog and Canomaculina pilosa (Stizenb.) Elix & Hale were transplanted simultaneously to 17 urban-industrial sites in a northwestern area of Córdoba city, Argentina. The transplantation sites were set according to different environmental conditions: traffic, industries, tree cover, building height, topographic level, position in the block and distances from the river and from the power plant. Three months later, chlorophyll a, chlorophyll b, phaeophytin a, soluble proteins, hydroperoxy conjugated dienes, malondialdehyde concentration and sulfur accumulation were determined, and a pollution index was calculated for each sampling site. Redundancy analysis was applied to detect the variation pattern of the lichen variables that can be 'best' explained by the environmental variables considered. The present study provides information about both the specific pattern response of each species to atmospheric pollution, and environmental conditions that determine it. As regards pollutants emission sources R. celastri showed a chemical response associated mainly with pollutant released by the power plant and traffic. P. microsticta and C. pilosa responded mainly to industrial sources. Regarding environmental conditions that affect the spreading of air pollutants and their incidence on the bioindicator, the topographic level and tree cover surrounding the sampling site were found to be important for R. celastri, tree cover surrounding the sampling site and the building height affected P. microsticta, while building height did so for C. pilosa.

Application of an adaptive neural network with symbolic rule extraction to fault detection and diagnosis in a power generation plant

Artificial neural networks have a good potential to be employed for fault diagnosis and condition monitoring problems in complex processes. In this paper, the applicability of the fuzzy ARTMAP (FAM) neural network as an intelligent learning system for fault detection and diagnosis in a power generation plant is described. The process under scrutiny is the circulating water (CW) system, with specific attention to the conditions of heat transfer and tube blockage in the CW system. A series of experiments has been conducted systematically to investigate the effectiveness of FAM in fault detection and diagnosis tasks. In addition, a set of domain rules has been extracted from the trained FAM network so that its predictions can be explained and justified. The outcomes demonstrate the benefits of employing FAM as an intelligent fault detection and diagnosis tool with an explanatory capability for monitoring and diagnosing complex processes in power generation plants.